Assessment of sampling and chemical analysis of source-separated organic household waste

The quality of the waste sampling procedure and chemical analysis was evaluated in a research program on characterization of organic waste obtained after disc screening of source-separated organic household waste. The sampling procedures focused on a truckload of waste and involved several steps of subsampling including shredding, mixing, blending, high-speed-blending, drying and milling prior to analysis of the organic waste with respect to ash content, crude fibers, crude fat, crude protein, sugar, starch, enzyme-digestible organic matter, P, N, C, H, S and calorific value. The statistical evaluation of the procedures involved 10 samples of the same truckload of waste obtained by splitting the sample at each level in the procedure according to a staggered, incomplete nested statistical design. Furthermore, one sample was analysed six times over a period of approximately one year. The statistical evaluation showed that no single step in the sampling procedure contributed with excessive variance and that the variance caused by the sampling procedure was approximately the same as the variance in the chemical analysis observed over a year. The variance varied with the analytical parameter but for most parameters the uncertainty was satisfactorily low (of the order of 3-10% expressed as the relative standard deviation, which is considered to be satisfactory for waste characterization).     

Environmental and economic assessment methods for waste management decision-support: possibilities and limitations.

A large number of methods and approaches that can be used for supporting waste management decisions at different levels in society have been developed. In this paper an overview of methods is provided and preliminary guidelines for the choice of methods are presented. The methods introduced include: Environmental Impact Assessment, Strategic Environmental Assessment, Life Cycle Assessment, Cost-Benefit Analysis, Cost-effectiveness Analysis, Life-cycle Costing, Risk Assessment, Material Flow Accounting, Substance Flow Analysis, Energy Analysis, Exergy Analysis, Entropy Analysis, Environmental Management Systems, and Environmental Auditing. The characteristics used are the types of impacts included, the objects under study and whether the method is procedural or analytical. The different methods can be described as systems analysis methods. Waste management systems thinking is receiving increasing attention. This is, for example, evidenced by the suggested thematic strategy on waste by the European Commission where life-cycle analysis and life-cycle thinking get prominent positions. Indeed, life-cycle analyses have been shown to provide policy-relevant and consistent results. However, it is also clear that the studies will always be open to criticism since they are simplifications of reality and include uncertainties. This is something all systems analysis methods have in common. Assumptions can be challenged and it may be difficult to generalize from case studies to policies. This suggests that if decisions are going to be made, they are likely to be made on a less than perfect basis.     

Uptake and distribution of Zn, Cu, Cd, and Pb in an aquatic plant Potamogeton natans

A better understanding of metal uptake and translocation by aquatic plants can be used to enhance the performance of constructed wetland systems for stormwater treatment. Specifically, this study examines whether the uptake of Zn, Cu, Cd, and Pb by Potamogeton natans is via the leaves, stems, or roots, and whether there is translocation from organs of uptake to other plant parts. Competition between the metals at uptake and at the level of the cell wall-bound part of the metals accumulated in stem and leaf tissue was also examined. The results show that Zn, Cu, Cd, and Pb were taken up by the leaves, stems, and roots, with the highest accumulation found in the roots. At the elevated metal concentrations common in stormwater the uptake of Cu, but not of Zn, Cd, or Pb, by the roots was somewhat limited at uptake due to competition with other metals. Between 24% and 59% of the metal content was bound to the cell walls of the plant. Except in the case of Pb, the cell wall-bound fraction was generally smaller in stems than in leaves. No translocation of the metals to other parts of the plant was found, except for Cd which was translocated from leaf to stem and vice versa. Dispersion of metals from sediment to water through P. natans is therefore unlikely.     

Transverse dispersion of non-reactive tracers in porous media: a new nonlinear relationship to predict dispersion coefficients

Assessing the potential of natural attenuation in groundwater relies on the ability to predict and quantify the processes that occur in contaminant plumes. Transverse dispersion is a significant mass transfer mechanism for mixing of electron acceptors and donors and thus may control the lengths of steady state plumes. Laboratory experiments were carried out using a 2-dimensional acrylic glass tank filled with glass beads, quartz sand and field site material as porous media. Flow velocities and grain sizes were varied in order to cover a large range of Peclet numbers including typical field scenarios. The laboratory study was extended by a comprehensive literature search to compare the new results with earlier work. As a result we propose a new empirical relationship for prediction of transverse dispersion coefficients (Dt) which is based on the Peclet number (Pe). This new relationship indicates a nonlinear dependency on the flow velocity (nu a) and grain size (d), namely a relative decrease of the dispersion coefficient with increasing flow velocity in relatively fast flowing water: Dt/Daq=Dp/Daq+0.28(Pe)0.72 (with Pe=nu a d/Daq; Daq and Dp denote the aqueous and pore diffusion coefficients, resp.).     

What have we learnt from the European Union's Emissions Trading System?

The EU Emissions Trading System (ETS) demonstrated the ability to design and launch a large-scale trading system in a short period of time. The path from initial reticence about emissions trading to implementation of the world's largest program is an important history. Three issues play a large role in the evaluation of the program to date and its on-going development: allocation plans, cost uncertainty, and leakage of emissions to abroad. Decisions in Phase I and II (2005-2012) were responsive to questions of political feasibility and implementation, but some of these decisions including allocation in particular will be substantially revised in Phase III (2013-2020).     

Solvent-free sampling with di-n-butylamine for monitoring of isocyanates in air

The solvent-free sampler for airborne isocyanates consisted of a polypropylene tube with an inner wall coated with a glass fibre filter, coupled in series with a 13 mm glass fibre filter. The filters were impregnated with reagent solution containing equimolar amounts of di-n-butylamine (DBA) and acetic acid. Air sampling was performed with an air flow of 0.2 l min(-1). The formed isocyanate-DBA derivatives were determined using liquid chromatography and tandem mass spectrometry. The sampler was investigated in regard to collection principle and extraction of the formed derivatives with good results. The possibility to store the sampler before sampling and to perform long-term sampling was demonstrated. Field extraction of the sampler was not necessary, as there was no difference between immediately extracted samples and stored ones (2 days). In comparative studies, the sampler was evaluated against a reference method, impinger-filter sampling with DBA as reagent. The ratios between the results obtained with the sampler and the reference in a test chamber at a relative humidity (RH) of 45% was in the range of 83-109% for isocyanates formed during thermal decomposition of PUR. At RH 95%, the range was 72-101% with the exception of isocyanic acid. In two field evaluations, the ratios for fast curing 2,4'- and 4,4'-methylene bisphenyl diisocyanate (MDI) was in the range 81-113% and for the 3-ring MDI the range was 54-70%. For the slower curing 1,6-hexamethylene diisocyanate (HDI) and HDI isocyanurate, the ratios were in the range 78-145%. In conclusion, the solvent-free sampler is a convenient alternative in most applications to the more cumbersome impinger-filter sampler.     

Fate of cadmium in Elodea canadensis

Elodea canadensis is a submersed macrophytes, widely distributed in stormwater treatment ponds and able to remove heavy metals from water. This study examines the Cd uptake, translocation, and efflux patterns in Elodea. Several experiments were set up in a climate chamber. To study the root and shoot Cd uptake, living and dead roots and shoots were treated with (109)Cd in one- and two-compartment systems. Furthermore, to examine Cd translocation and distribution, either roots or shoots were treated with (109)Cd. Finally, the efflux of Cd from roots and shoots, respectively, to the external solution was studied after loading whole plants with (109)Cd. Results from the two compartment studies show that Cd is accumulated via direct uptake by both roots and shoots of Elodea. The Cd accumulation proved not to be metabolically dependent in Elodea, and the apoplastic uptake in particular was decreased by Cd pretreatment. In one week, up to 23% of the root uptake was translocated to the shoots, while about 2% of the Cd accumulated by shoots was translocated to the roots. Thus, slight dispersion of Cd is possible, while metal immobilization will not be directly mediated via the Elodea plant. The efflux experiment proved that both shoots of dead plants and roots of living plants had a faster efflux than did shoots of living plants. This information is relevant for an understanding of the fate of Cd in stormwater treatment ponds with Elodea.     

Use of questionnaires and an expert panel to judge the environmental consequences of chemical spills for the development of an environment-accident index

Assessing the environmental consequences of a chemical accident is a complex task. To date, the methods used to evaluate the environmental effects of an acute release of a chemical have often been based on measurements of chemical and physical variables deemed to be important, such as the concentration of the chemical. However, a broader strategy is needed to predict the environmental consequences of potential accidents during the planning process. An Environment-Accident Index (EAI), a simple tool based on such a strategy, has been developed to facilitate the consideration of a multitude of influential variables. The objectives of this study were to evaluate whether questionnaire-based expert panel's judgements could provide useful data on the environmental consequences of chemical spills, and an effective basis for further development of the EAI. As expected, the judgements did not agree perfectly, but they do give rough indications of the environmental effects, and highlight consistent trends that should be useful inputs for planning, prevention and decontamination processes. The different accidents were also judged to have caused everything from minor to very major effects in the environment, implying that a wide range of accident scenarios were represented in the material and covered by the EAI. Therefore, questionnaires and expert panel judgements can be used to collect useful data for estimating the likely environmental consequences of chemical accidents and for further development of the EAI.     

Modeling riverine nutrient transport to the Baltic Sea: a large-scale approach

We developed for the first time a catchment model simulating simultaneously the nutrient land-sea fluxes from all 105 major watersheds within the Baltic Sea drainage area. A consistent modeling approach to all these major watersheds, i.e., a consistent handling of water fluxes (hydrological simulations) and loading functions (emission data), will facilitate a comparison of riverine nutrient transport between Baltic Sea subbasins that differ substantially. Hot spots of riverine emissions, such as from the rivers Vistula, Oder, and Daugava or from the Danish coast, can be easily demonstrated and the comparison between these hot spots, and the relatively unperturbed rivers in the northern catchments show decisionmakers where remedial actions are most effective to improve the environmental state of the Baltic Sea, and, secondly, what percentage reduction of riverine nutrient loads is possible. The relative difference between measured and simulated fluxes during the validation period was generally small. The cumulative deviation (i.e., relative bias) [Sigma(Simulated - Measured)/Sigma Measured x 100 (%)] from monitored water and nutrient fluxes amounted to +8.2% for runoff, to -2.4% for dissolved inorganic nitrogen, to +5.1% for total nitrogen, to +13% for dissolved inorganic phosphorus and to +19% for total phosphorus. Moreover, the model suggests that point sources for total phosphorus compiled by existing pollution load compilations are underestimated because of inconsistencies in calculating effluent loads from municipalities.     

Farmworker children's residential non-dietary exposure estimates from micro-level activity time series

Farmworkers' children may have increased pesticide exposure through dermal absorption and non-dietary ingestion, routes that are difficult to measure and model. The Cumulative Aggregate Simulation of Exposure (CASE) model, integrates the complexity of human behavior and variability of exposure processes by combining micro-level activity time series (MLATS) and mechanistic exposure equations. CASE was used to estimate residential non-dietary organophosphate pesticide exposure (i.e., inhalation, dermal, and non-dietary ingestion) to California farmworker children and evaluate the micro-activity approach. MLATS collected from children and distributions developed from pesticide measurements in farmworkers' residences served as inputs. While estimated diazinon exposure was greater for inhalation, chlorpyrifos exposure was greater for the other routes. Greater variability existed between children (σ_B² = 0.22–0.39) than within each child's simulations (σ_W² = 0.01–0.02) for dermal and non-dietary ingestion. Dermal exposure simulations were not significantly different than measured values from dosimeters worn by the children. Non-dietary ingestion exposure estimates were comparable to duplicate diet measurements, indicating this route may contribute substantially to aggregate exposure. The results suggest the importance of the micro-activity approach for estimating non-dietary exposure. Other methods may underestimate exposure via these routes. Model simulations can be used to identify at-risk children and target intervention strategies.