Recycling polymeric waste from electronic and automotive sectors into value added products

The environmentally sustainable disposal and recycling of ever increasing volumes of electronic waste has become a global waste management issue. The addition of up to 25% polymeric waste PCBs (printed circuit boards) as fillers in polypropylene (PP) composites was partially successful: while the tensile modulus, flexural strength and flexural modulus of composites were enhanced, the tensile and impact strengths were found to decrease. As a lowering of impact strength can significantly limit the application of PP based composites, it is necessary to incorporate impact modifying polymers such as rubbery particles in the mix. We report on a novel investigation on the simultaneous utilization of electronic and automotive rubber waste as fillers in PP composites. These composites were prepared by using 25 wt.% polymeric PCB powder, up to 9% of ethylene propylene rubber (EPR), and PP: balance. The influence of EPR on the structural, thermal, mechanical and rheological properties of PP/PCB/ EPR composites was investigated. While the addition of EPR caused the nucleation of the β crystalline phase of PP, the onset temperature for thermal degradation was found to decrease by 8%. The tensile modulus and strength decreased by 16% and 19%, respectively; and the elongation at break increased by ~71%. The impact strength showed a maximum increase of ~18% at 7 wt.%–9 wt.% EPR content. Various rheological properties were found to be well within the range of processing limits. This novel eco-friendly approach could help utilize significant amounts of polymeric electronic and automotive waste for fabricating valuable polymer composites.

Open image in new window

     

Fluoride, boron and nitrate toxicity in ground water of northwest Rajasthan, India

The study was carried out to access the fluoride, boron, and nitrate concentrations in ground water samples of different villages in Indira Gandhi, Bhakra, and Gang canal catchment area of northwest Rajasthan, India. Rural population, in the study site, is using groundwater for drinking and irrigation purposes, without any quality test of water. All water samples (including canal water) were contaminated with fluoride. Fluoride, boron, and nitrate were observed in the ranges of 0.50–8.50, 0.0–7.73, and 0.0–278.68 mg/l, respectively. Most of the water samples were in the categories of fluoride 1.50 mg/l, of boron 2.0–4.0 mg/l, and of nitrate <?45 mg/l. There was no industrial pollution in the study site; hence, availability of these compounds in groundwater was due to natural reasons and by the use of chemical fertilizers.     

Incineration at Bayou Bonfouca Remediation Project

The Bayou Bonfouca hazardous waste site is located in Slidell, Louisiana, approximately 96 kilometers (60 miles) northeast of New Orleans. This site is ranked number 1,006 on the National Priorities List of Superfund sites. The U.S. Environmental Protection Agency (EPA) conducted a remedial investigation in 1986 and determined the primary potential exposure sources to be groundwater, surface waste piles, and contaminated sediment in Bayou Bonfouca. Based on the results of investigations, EPA and the Louisiana Department of Environmental Quality chose a remedy that involves dredging contaminated sediment from the bayou, excavating contaminated waste piles and soil, and incinerating the solid wastes in a transportable incinerator. The site remedy, which included incineration, was specified in the Record of Decision signed in March 1987.

Of the total 142,000 megagrams (Mg) (157,000 tons) of waste to be incinerated, approximately 119,000 Mg (132,000 tons) consist of hazardous sediment from the bayou; 22,600 Mg (25,000 tons) consist of lightly contaminated soils and waste piles, cellulosic materials, and other miscellaneous wastes on the ground. The solid wastes are primarily low heat content sediment and soils and cellulosic materials with polyaromatic hydrocarbon (PAH) concentrations from milligrams per kilogram (parts per million) levels up to two percent. The dredged bayou sediment will be dewatered in six, 115-cubiometer (150-cubic-yard) plate and frame filter presses before processing in the incinerator. A rotary-kiln-based single train incinerator is deployed at Bayou Bonfouca to process the solid waste feed.

On-site pilot studies indicated that the PAHs in groundwater could be removed by on-site pumping, treatment, and discharge of treated effluent to the bayou. The groundwater treatment plant went on-stream in June 1991. Treatment involves oil/water separation, filtration, carbon bed adsorption, and aeration.

IT Corporation-OH Materials, a joint venture, was awarded a contract in May 1991 and a notice to proceed in February 1992 to remediate and restore the Bayou Bonfouca site. The remediation project includes air quality monitoring and controls, site preparation, dredging and excavation, bayou bank stabilization and monitoring, equipment mobilization and erection, the trial burn, incineration, demobilization, and site closure. The project completed a successful trial burn in November 1993, and the commercial operation began in December 1993. The expected duration of the project is 40 months from mobilization to site closure.     

Heavy metal bioaccumulation in selected medicinal plants collected from Khetri copper mines and comparison with those collected from fertile soil in Haridwar,India

Heavy metal distribution in medicinal plants is gaining importance not only as an alternative medicine, but also for possible concern due to effects of metal toxicity. The present study has been focused on emphasizing the heavy metal status and bioaccumulation factors of V, Mn, Fe, Co, Cu, Zn, Se (essential metals) and Cr, Ni, Cd, As and Pb (potentially toxic metals) in medicinal plants grown under two different environmental conditions e.g., near to Khetri copper mine and those in fertile soils of Haridwar, both in India, using Instrumental Neutron Activation Analysis (relative method) and Atomic Absorption Spectrometry. The copper levels in the medicinal plants from Khetri were found to be 3-4 folds higher (31.6–76.5 mg kg^?1) than those from Haridwar samples (7.40–15.3 mg kg^?1), which is correlated with very high copper levels (763 mg kg^?1) in Khetri soil. Among various heavy metals, Cr (2.60–5.92 mg kg^?1), Cd (1.47–2.97 mg kg^?1) and Pb (3.97–6.63 mg kg^?1) are also higher in concentration in the medicinal plants from Khetri. The essential metals like Mn (36.4–69.3 mg kg^?1), Fe (192–601 mg kg^?1), Zn (24.9–49.9 mg kg^?1) and Se (0.13–0.91 mg kg^?1) and potentially toxic metals like Ni (3.09–9.01 mg kg^?1) and As (0.41–2.09 mg kg^?1) did not show much variations in concentration in the medicinal plants from both Khetri and Haridwar. The medicinal plants from Khetri, e.g., Ocimum sanctum, Cassia fistula, Withania somnifera and Azadirachta Indica were found rich in Ca and Mg contents while Aloe barbadensis showed moderately high Ca and Mg. Higher levels of Ca-Mg were found to correlate with Zn (except Azadirachta Indica). The bioaccumulation factors (BAFS) of the heavy metals were estimated to understand the soil-to-plant transfer pattern of the heavy metals. Significantly lower BAF values of Cu and Cr were found in the medicinal plants from Khetri, indicating majority fraction of these metals are precipitated and were immobilized species unsuitable for plant uptake. Overall, Withania somnifera (Ashwagandha) showed very high metal bioaccumulation.     

Impact of water quality on the stress physiology of cultured Labeo rohita (Hamilton-Buchanan)

Investigation was conducted for 12 months in two water bodies, S1 with optimum water quality and S2 receiving sewage water. The water quality parameters were assessed in relation to the impact on the stress sensitive physiological parameters of fish Labeo rohita. While optimum levels of transparency, dissolved oxygen, unionised ammonia, alkalinity and hardness in S1 reflected in minimum variation of the physiological parameters of L. rohita but suboptimal levels of DO (nil-18.0 mg/l) and CO2 (nil-16.0 mg/l) observed diurnally and unionised ammonia (0.11-0.42 mg/l) found throughout the experimental period, resulted in significant variation in plasma cortisol (90.0-377.0 ng/ml), cholesterol (89.6-285.0 mg/dl) and condition factor (0.7-1.3) in L. rohita. The results are of significance for fish aquatic habitat management.     

Correction to: Effect of feed slurry dilution and total solids on specific biogas production by anaerobic digestion in batch and semi-batch reactors

Journal of Material Cycles and Waste Management -     

Influencing resilience: the role of policy entrepreneurs in mainstreaming climate adaptation

One way to make development pathways more resilient in the face of a changing climate has been through mainstreaming adaptation into government policies, planning and sectoral decision‐making. To date, many of the transferable lessons have taken the form of technical approaches such as risk assessments and toolkits. This article instead draws on evidence from South Asia to emphasise some of the more tacit and informal approaches used to influence adaptation policy. Despite their apparent significance in policy processes, such tactics are often neither planned for nor well reported in resilience‐building projects and programme documents. Using evidence to populate a typology of influencing strategies, this article looks particularly at the role of policy entrepreneurs who navigate the political complexity of both formal and informal governance systems to promote successful adaptation mainstreaming. It concludes with recommendations for adaptation and resilience programming that can more effectively harness the breadth of influencing strategies.     

Isolation and identification of an anti-algal compound from Artemisia annua and mechanisms of inhibitory effect on algae

The goals of this work were to isolate and identify an anti-algal compound from extracts of Artemisia annua and study its mode of action on Microcystis aeruginosa. The anti-algal compound was isolated from the extracts using column chromatography and activity-guided fractionation methods. Artemisinin with strong anti-algal activity was identified by gas chromatography-mass spectrometry and ¹H Nuclear Magnetic Resonance. The EC₅₀ of artemisinin on M. aeruginosa was 3.2 mg L⁻¹. Artemisinin decreased the soluble protein content and increased the superoxide dismutase activity and ascorbic acid content of M. aeruginosa, but exerted no effect on soluble sugar content. The results suggested the mode of action of artemisinin on algae may primarily be the increasing level of reactive oxygen species in algae cells. The results of our research could aid in the development of new anti-algal substances and lead to further study of mechanisms of inhibitory effect on algae.     

Utilization of anaerobically treated distillery spent wash for production of cellulases under solid-state fermentation

Pollution caused by distillery spent wash on one hand has stimulated the need to develop new technologies to treat the waste and on the other, forced us to reevaluate the efficient utilization of its nutritive potential for production of various high value compounds. In this study, anaerobically treated distillery spent wash was used for the production of cellulases by Aspergillus ellipticus under solid-state fermentation using wheat straw as a substrate. The interactions between distillery effluent concentration, initial pH, moisture content and inoculum size were investigated and modeled using response surface methodology (RSM) involving Box–Behnken design (BBD). Under optimized conditions, filter paper activity, β-glucosidase and endo-β-1,4-glucanase activities were found to be 13.38, 26.68 and 130.92 U/g of substrate respectively. Characterization of endo-β-1,4-glucanase and β-glucosidase was done after partial purification by ammonium sulfate fractionation followed by desalting. The partially purified endo-β-1,4-glucanase and β-glucosidase showed maximum activity at 60 °C. Saccharification studies performed with different lignocellulosic substrates showed that wheat bran was most susceptible to enzymatic hydrolysis. The study suggests that anaerobically treated distillery spent wash can be used as a viable nutrient source for cellulase production under solid-state fermentation by A. ellipticus.     

Tetrabromobisphenol A recovery from computer housing plastic by a new solvothermal process

Brominated flame retardants contained in electrical and electronic waste plastic are toxic to both humans and the environment. Most disposal technologies for brominated flame retardants are environmentally unfriendly. Here, a novel solvothermal process was designed to recover tetrabromobisphenol A, a typical brominated flame retardant, from waste computer housing plastic. The plastic waste was treated by the solvothermal process followed by vacuum rotary evaporation. Results show a tetrabromobisphenol A recovery efficiency of 78.9 %, and a purity of 95.6 %. The stability of tetrabromobisphenol A during the solvothermal process was confirmed by nuclear magnetic resonance. Kinetics showed that diffusion across the polymer layer controlled recovery. We conclude that the novel solvothermal process is a promising green way to recover tetrabromobisphenol A from electrical and electronic waste plastic.