Sidestream tobacco smoke constituents in indoor air modelled in an experimental chamber— Polycyclic aromatic hydrocarbons

Exposure to sidestream tobacco smoke is concerned with constituents in suspension in the indoor atmosphere. The natural dissipation of sidestream tobacco smoke has been investigated in a static atmosphere in a 10 m³ experimental chamber, and the rate of dissipation is expressed as T_0.5, the half-life of residence in the air. Respective T_0.5 of smoke components are calculated from the various sample data points, assuming a kinetic equation of the first-order process. Sidestream smoke has been generated by a smoking machine according to the Coresta standard protocol and then left to age over an 8-hour period, with subsequent sampling at defined time intervals. The experiments have been repeated over five days, and eight data point samples are obtained for each experiment. Besides nicotine, CO, and smoke particulate matter, interest has been focused on polycyclic aromatic hydrocarbons (PAH). The initial concentrations, C₀ for smoke particulate matter and nicotine (gas and particulate phases) are found to be 13.8 mg and 92 μg per cigarette per cubic meter, with T_0.5 being 2.6 and 2.1 hours, respectively. Low molecular-weight PAH have T_0.5 up to 20 hours, explainable only by their high concentrations in the gas phase, while the 3- to 7-ring PAH have T_0.5 of about 2 hours. The contribution of CO to ambient concentration is 91 mg per cigarette per cubic meter. The data can be useful in mathematical modellization studies regarding ventilation or exposure to sidestream smoke.     

Assessment of some water quality parameters in the Red River downstream,Vietnam by combining field monitoring and remote sensing method

Environmental Science and Pollution Research - The Red River is the largest river in northern Vietnam, and it serves as the main water source for production and human activities in the Red River...     

Primary biosorption mechanism of lead (II) and cadmium (II) cations from aqueous solution by pomelo (Citrus maxima) fruit peels

Environmental Science and Pollution Research - The present work investigates the primary adsorption mechanisms of lead (II) and cadmium (II) cations onto pomelo fruit peel (PFP) from aqueous...     

Spatial and temporal variations of PAHs in surface sediments of estuarine and coast of CanGio wetland,Vietnam

Surface sediments from estuarine and coast of CanGio wetland (CGW) of Hochiminh City, Vietnam, were investigated to identify the spatial and temporal variations of polycyclic aromatic hydrocarbons (PAHs). The total PAHs showed wide variation but similar to patterns observed (F?=?0.901, p?=?0.46) in LongTau (31?±?77 ng/g dry weight, n?=?13), SoaiRap (53?±?81, n?=?4), ThiVai (60?±?62, n?=?10) estuaries, and coastal areas (112?±?211, n?=?9). A decreasing trend in the wet season (F?=?8.8, p?=?0.01) reflected that inland sources such as wastewater discharged and atmospherically transported contaminants contributed to PAHs in sediments. The risk posed by the PAHs in the coastal and estuarine areas of CGW is still negligible. The present study provides baseline data, which can be used for regular monitoring and future strategy of environmental protection for the study area.

     

Optimization, equilibrium, adsorption behavior and role of surface functional groups on graphene oxide-based nanocomposite towards diclofenac drug

Aquatic contamination of diclofenac (DCF), an emergent non-steroidal anti-inflammatory drug (NSAIDs), can result in adverse effects to many ecosystems through biomagnification. Hence, introducing effective remediation techniques to sequester the pharmaceutical wastes is highly fundamental to prevent their accumulation in the environment. Generally, adsorption has been presented as a green and efficient approach. Herein, we report the characterization and application of the novel magnetic nanocomposite ([email protected]₂O₄) derived from cobalt-based ferrite (CoFe₂O₄) and graphene oxide (GO) for DCF adsorption. For the optimization procedure, the response surface methodology (RSM) was adopted to investigate the impacts of DCF concentration (1.6–18.4 mg/L), DCF dosage (0.08–0.92 g/L), and solution pH (2.6–9.4) to find the optimum conditions for DCF removal, at 10.5 mg/L, 0.74 g/L, and pH 4, respectively. For the adsorption experiments, the kinetic, isotherm, thermodynamic, and intraparticle diffusion models were systematically studied. Moreover, we have elucidated the role of functional groups on the surface of [email protected]₂O₄ in enhancing the adsorption of DCF drug. With good removal efficiency (up to 86.1%), high maximum adsorption capacity (32.4 mg/g), [email protected]₂O₄ can be a potential candidate to eliminate DCF drug from water.     

Atmospheric heavy metal deposition in Northern Vietnam: Hanoi and Thainguyen case study using the moss biomonitoring technique,INAA and AAS

Background, aim, and scope  

The moss technique is widely used to monitor atmospheric deposition of heavy metals in many countries in Europe, whereas this technique is scarcely used in Asia. To implement this international reliable and cheap methodology in the Asian countries, it is necessary to find proper moss types typical for the Asian environment and suitable for the biomonitoring purposes. Such a case study was undertaken in Vietnam for assessing the environmental situation in strongly contaminated areas using local species of moss Barbula indica.     

Uncovering causes and effects of desertification using a Leopold matrix in Binh Thuan Province,Vietnam

Vietnam is a coastal country projected to be heavily affected by climate change.Binh Thuan Province is part of the driest region of Vietnam and is prone to desertification.An expert panel participated in developing a Leopold matrix which allowed for identification of desertification impact factors on the province's socioeconomic activities and assessment of the strength of cause-effect relationships in terms of magnitude and importance.Land use planning,surface water,and the length of the dry season are considered the most important causes,with the overall highest scores for both magnitude and importance in the cause-effect relationship.The largest effects of the different factors are perceived on water supply for agriculture and household use.Water availability and land use planning are important remedial action domains,while drought and land cover require monitoring to assess impacts.The indicators of cause and effect can be used in a longer-term general monitoring and assessment framework to combat desertification in the area.     

Climate change impact assessment on Northeast China’s grain production

The international community is paying more attention to climate change because a consensus has been reached that climate change has an adverse effect not only on the environment but also on agriculture. Therefore, in this study, present and future climate datasets (obtained from general circulation models) including atmospheric carbon concentration were used to assess the impact of climate change on grain production for an important base of China (Northeast). An empirical model has been developed using climate and other additional variables (effective irrigation area, fertilizer, and labor force) to assess the effect of climate change on grain production. The results revealed that maximum temperature is a key climate determinant in grain production of the study area. Atmospheric carbon concentration showed a significant impact on grain outputs in most of the cases. During the analysis, it was observed that precipitation displayed a declining trend while an effective irrigation area showed positive non-significant contribution to grain production. Analysis based on different representative concentration pathways exhibited that maximum temperature may contribute negatively to grain production in the future. Overall, the analysis showed that climate change has a significant contribution to grain production. In conclusion, the implications for future research and policymakers have been addressed. Particularly, the importance of considering regional differences in adaptation planning in agricultural regions was also considered.

     

Characterization and prediction of meandering channel migration in the GIS environment: A case study of the Sabine River in the USA

This study focused on the prediction of a 22 km meandering channel migration of the Sabine River between the states of Texas and Louisiana. The meander characteristics of 12 bends, identified from seven orthophotos taken between 1974 and 2004, were acquired in a GIS environment. Based on that earlier years' data acquisition, channel prediction was performed for the two years 1996 and 2004 using least squares estimation and linear extrapolations, yielding a satisfactory agreement with the observations (the median predicted and observed migration rates were 3.1 and 3.6 [m/year], respectively). The best-predicted migration rate was found to be associated with the longest orthophoto-recorded interval. The study confirmed that channel migration is strongly correlated with bend curvature and that the maximum migration rate of the bend corresponded to a radius of curvature [bend radius (R(C))/channel width (W(C))] of 2.5. In tight bends of a smaller radius of curvature than 1.6, secondary flow scouring near the bend apex increases bend curvature. The stability index of the dimensionless bend radius was determined to be 2.45. Overall, this study proves the effectiveness of least squares estimation with historical orthophotography for characterization of meandering channel migration.