Monitoring of water quality inflow and outflow of a farm in Italian Padana plain for rice cultivation: a case study of two years

Environmental Science and Pollution Research - Rice cultivation requires a large use of pesticides and nutrients to control weed proliferation and improve production. The water quality of four...     

Characterization and pyrolysis of Chlorella vulgaris and Arthrospira platensis: potential of bio-oil and chemical production by Py-GC/MS analysis

Environmental Science and Pollution Research - Biofuels have been seen as potential sources to meet future energy demand as a renewable and sustainable energy source. Despite the fact that the...     

Furniture wood wastes: Experimental property characterisation and burning tests

Referring to the industrial wood waste category (as dominant in the provincial district of Pesaro-Urbino, Marche Region, Italy), this paper deals with the experimental characterisation and the carrying out of non-controlled burning tests (at lab- and pilot-scale) for selected “raw” and primarily “engineered” (“composite”) wood wastes.The property characterisation has primarily revealed the following aspects: potential influence on moisture content of local weather conditions at outdoor wood waste storage sites; generally, higher ash contents in “engineered” wood wastes as compared with “raw” wood wastes; and relatively high energy content values of “engineered” wood wastes (ranging on the whole from 3675 to 5105 kcal kg⁻¹ for HHV, and from 3304 to 4634 kcal kg⁻¹ for LHV).The smoke qualitative analysis of non-controlled lab-scale burning tests has primarily revealed: the presence of specific organic compounds indicative of incomplete wood combustion; the presence exclusively in “engineered” wood burning tests of pyrroles and amines, as well as the additional presence (as compared with “raw” wood burning) of further phenolic and containing nitrogen compounds; and the potential environmental impact of incomplete industrial wood burning on the photochemical smog phenomenon.Finally, non-controlled pilot-scale burning tests have primarily given the following findings: emission presence of carbon monoxide indicative of incomplete wood combustion; higher nitrogen oxide emission values detected in “engineered” wood burning tests as compared with “raw” wood burning test; and considerable generation of the respirable PM₁ fraction during incomplete industrial wood burning.     

Application of membrane bioreactor technology for wastewater treatment and reuse in the Mediterranean region: Focusing on removal efficiency of non-conventional pollutants

The Mediterranean Region is a semi-arid area whose land is facing serious erosion, causing adverse impacts on agriculture. To improve the water availability, researchers have proposed the reclamation and reuse of treated wastewater. In this paper, we report the main findings of 10 years of research on the efficiencies of a conventional activated sludge process and a submerged membrane bioreactor, with particular emphasis on the removal of non-conventional pollutants. The studies showed that the membrane bioreactor produced a virtually solids-free, high-quality permeate: most nutrients, heavy metals, and persistent organic pollutants were removed, and in particular, dioxins, furans, and polychlorinated biphenyls were typically present at concentrations below the detection limit. Moreover, the total coliforms count decreased by 4–5 log and Escherichia coli was absent from the membrane bioreactor permeate. These results, combined with the continuing reduction of the capital and operating costs for this approach, suggest that membrane bioreactors are an increasingly cost-effective technology to produce treated effluents that are suitable for reuse.     

Occurrence of PAH in the seasonal snowpack of the Eastern Italian Alps

PAH concentrations have been determined in 47 seasonal snowpack samples collected in the Valbelluna valley and in the Bellunesi Dolomites National Park, in the Italian North-Eastern Alps, during the winter of 2005. The ΣPAH concentration in high-altitude alpine sites (above 1700 m) was 32 ± 20 ng/kg while in valley bottom urban areas it was 165 ± 54 ng/kg with maximum values of 290 ng/kg. The GIS mapping technique was employed to produce a PAH spatial distribution. The urbanized Valbelluna valley, and in particular the SW part, had the highest accumulation of all PAH, with values an order of magnitude more than those in rural and alpine areas. This behaviour is consistent with urban air quality data, and is due to geo-morphological and meteorological factors such as the deeper shape of the valley at the position of the town of Feltre and the low altitude of the boundary layer during the winter season.     

Valorization of solid waste products from olive oil industry as potential adsorbents for water pollution control—a review

The global olive oil production for 2010 is estimated to be 2,881,500 metric tons. The European Union countries produce 78.5 % of the total olive oil, which stands for an average production of 2,136,000 tons. The worldwide consumption of olive oil increased of 78 % between 1990 and 2010. The increase in olive oil production implies a proportional increase in olive mill wastes. As a consequence of such increasing trend, olive mills are facing severe environmental problems due to lack of feasible and/or cost-effective solutions to olive-mill waste management. Therefore, immediate attention is required to find a proper way of management to deal with olive mill waste materials in order to minimize environmental pollution and associated health risks. One of the interesting uses of solid wastes generated from olive mills is to convert them as inexpensive adsorbents for water pollution control. In this review paper, an extensive list of adsorbents (prepared by utilizing different types of olive mill solid waste materials) from vast literature has been compiled, and their adsorption capacities for various aquatic pollutants removal are presented. Different physicochemical methods that have been used to convert olive mill solid wastes into efficient adsorbents have also been discussed. Characterization of olive-based adsorbents and adsorption mechanisms of various aquatic pollutants on these developed olive-based adsorbents have also been discussed in detail. Conclusions have been drawn from the literature reviewed, and suggestions for future research are proposed.     

Comparison of environmental impacts related to municipal solid waste and construction and demolition waste management and recycling in a Latin American developing city

Environmental Science and Pollution Research - Construction and demolition waste (CDW) and municipal solid waste (MSW) are the waste flows mostly generated at a global level. In developing...     

Renewable energies in electricity generation for reduction of greenhouse gases in Mexico 2025

This study presents 4 scenarios relating to the environmental futures of electricity generation in Mexico up to the year 2025. The first scenario emphasizes the use of oil products, particularly fuel oil, and represents the historic path of Mexico's energy policy. The second scenario prioritizes the use of natural gas, reflecting the energy consumption pattern that arose in the mid-1990s as a result of reforms in the energy sector. In the third scenario, the high participation of renewable sources of energy is considered feasible from a technical and economic point of view. The fourth scenario takes into account the present- and medium-term use of natural-gas technologies that the energy reform has produced, but after 2007 a high and feasible participation of renewable sources of energy is considered. The 4 scenarios are evaluated up to the year 2025 in terms of greenhouse gases (GHG) and acid rain precursor gases (ARPG).