Distribution and availability of trace elements in municipal solid waste composts

Trace element contamination is one of the main problems linked to the quality of compost, especially when it is produced from urban wastes, which can lead to high levels of some potentially toxic elements such as Cu, Pb or Zn. In this work, the distribution and bioavailability of five elements (Cu, Zn, Pb, Cr and Ni) were studied in five Spanish composts obtained from different feedstocks (municipal solid waste, garden trimmings, sewage sludge and mixed manure). The five composts showed high total concentrations of these elements, which in some cases limited their commercialization due to legal imperatives. First, a physical fractionation of the composts was performed, and the five elements were determined in each size fraction. Their availability was assessed by several methods of extraction (water, CaCl(2)-DTPA, the PBET extract, the TCLP extract, and sodium pyrophosphate), and their chemical distribution was assessed using the BCR sequential extraction procedure. The results showed that the finer fractions were enriched with the elements studied, and that Cu, Pb and Zn were the most potentially problematic ones, due to both their high total concentrations and availability. The partition into the BCR fractions was different for each element, but the differences between composts were scarce. Pb was evenly distributed among the four fractions defined in the BCR (soluble, oxidizable, reducible and residual); Cu was mainly found in the oxidizable fraction, linked to organic matter, and Zn was mainly associated to the reducible fraction (iron oxides), while Ni and Cr were mainly present almost exclusively in the residual fraction. It was not possible to establish a univocal relation between trace elements availability and their BCR fractionation. Given the differences existing for the availability and distribution of these elements, which not always were related to their total concentrations, we think that legal limits should consider availability, in order to achieve a more realistic assessment of the risks linked to compost use.     

Trace metals in river bed sediments: An assessment of their partitioning and bioavailability by using multivariate exploratory analysis

In this study, river bed sediments were submitted to a BCR sequential extraction, together with three bioavailability tests: a weak acid elutriate (HCl), a physiologically based extraction test (PBET) and a toxicity characteristic leaching procedure (TCLP). The most remarkable features of the BCR procedure were: i) Mn and Zn showed the highest proportion of the F1 exchangeable fraction; ii) in addition to Fe, Pb and Zn were the metals with the higher percentages in the F2 reducible fraction; iii) Fe and Cu were the elements with the highest proportion of the F3 oxidizable fraction; iv) the application of Principal Component Analysis to the metals in each of the three fractions did not show clear associations between metals and sediment components considered as metal scavengers, v) considering the sum of the three BCR fractions, the elements showed a decreasing availability of: Fe > Pb > Zn > Cu > Mn > Ni > Cr. The single extractions followed a decreasing extractability order of: HCl > PBET > TCLP and they were far from the extractability deduced from the sum of fractions in the BCR extraction.     

Potential use of composts and vermicomposts as low-cost adsorbents for dye removal: an overlooked application

Environmental Science and Pollution Research - The use of composts and vermicomposts as adsorbents is an important topic of study in the field of environmental remediation. These materials are rich...     

Study of phytopigments in river bed sediments: effects of the organic matter, nutrients and metal composition

Phytopigment estimation has a considerable interest in the evaluation of freshwater bodies' quality, because it takes into account the synergistic effect of nutrients like phosphorus or nitrogen on algal growth producing eutrophication. Furthermore, their increasing concentration constitutes the first step in the formation of biofilms on the surface sediments, adding a new and very important element to the dynamic nature of the surface sediments. In this study the distribution of phytoplankton--in terms of chlorophyll-a, chlorophyll-b, phaeophytin-a, phaeophytin-b, total carotenoids, total chlorophyll, and total phaeophytin--was evaluated in river bed sediments. Samples collected at sites with low levels of nutrients (P,N) and metal concentrations showed lower phytopigment concentrations than those collected at the sampling sites affected by sources of pollution. Phytoplankton concentrations were directly and highly related to the organic matter concentrations--in particular to the humic fraction--as well as to the total nitrogen (N), total phosphorus (P(T)) and available phosphorus (P(A)) concentrations in sediments. In addition, phytoplankton also correlates positively with Cu, Zn, Fe and Al extracted in oxalate, being Cu the variable that most influences the phytopigment growth. These are essential metals for the metabolism of the phytoplankton, so therefore the increase in metal concentrations can increase algal growth, unless they reach toxic levels.     

Assessment of municipal solid waste compost quality using standardized methods before preparation of plant growth media.

The quality of compost and its suitability for agricultural application depend upon physical and chemical parameters such as water-holding capacity, porosity, pH, electrical conductivity, C/N ratio, available nutrients and the absence of toxic substances. In the present study a complete characterization of an industrial municipal solid waste compost (MSWC) based on standardized European methods (CEN) for soil improvers and growing media was obtained, and compared with the quality of other Spanish composted biowaste and conventional substrates such as peat and pine bark. The MSWC was obtained from the main composting plant in Galicia (Spain), which processes organic waste that has been separated at origin and collected from more than 100 000 inhabitants. The MSWC presented a lower C/N ratio (15) than peat (84) and composted pine bark (CPB) (211), but had a similar ratio to other marketed MSWC. The nutrients and heavy metals were extracted using different recommended solvents (water, CaCl2 + diethylen triamin pentaacetic acid, and aqua regia). The nutrient concentrations of composted urban waste or manure were much higher than those of peat, CPB or pine bark. On the basis of the results of the plant tolerance test, the MSWC could be employed directly as a soil improver, but would need to be diluted with other low-salt components such as peat or CPB before being used as a growing media.     

Oxygen isotope fractionation between bird bone phosphate and drinking water

Oxygen isotope compositions of bone phosphate (δ¹⁸O_p) were measured in broiler chickens reared in 21 farms worldwide characterized by contrasted latitudes and local climates. These sedentary birds were raised during an approximately 3 to 4-month period, and local precipitation was the ultimate source of their drinking water. This sampling strategy allowed the relationship to be determined between the bone phosphate δ¹⁸O_p values (from 9.8 to 22.5‰ V-SMOW) and the local rainfall δ¹⁸O_w values estimated from nearby IAEA/WMO stations (from ?16.0 to ?1.0‰ V-SMOW). Linear least square fitting of data provided the following isotopic fractionation equation: δ¹⁸O_w = 1.119 (±0.040) δ¹⁸O_p ? 24.222 (±0.644); R ² = 0.98. The δ¹⁸O_p–δ¹⁸O_w couples of five extant mallard ducks, a common buzzard, a European herring gull, a common ostrich, and a greater rhea fall within the predicted range of the equation, indicating that the relationship established for extant chickens can also be applied to birds of various ecologies and body masses. Applied to published oxygen isotope compositions of Miocene and Pliocene penguins from Peru, this new equation computes estimates of local seawater similar to those previously calculated. Applied to the basal bird Confuciusornis from the Early Cretaceous of Northeastern China, our equation gives a slightly higher δ¹⁸O_w value compared to the previously estimated one, possibly as a result of lower body temperature. These data indicate that caution should be exercised when the relationship estimated for modern birds is applied to their basal counterparts that likely had a metabolism intermediate between that of their theropod dinosaur ancestors and that of advanced ornithurines.     

Reutilization of granite powder as an amendment and fertilizer for acid soils

The properties of granite powders--a granite manufacturing waste product-were analyzed to assess their potential use as amendments and fertilizers on acid soils. Two types of powders were characterized: one produced during cutting of granite with a diamond-edged disc saw, comprising only rock powder, the other produced during cutting with a multi-blade bandsaw, containing calcium hydroxide and metal filings added during the cutting procedure. The acid neutralizing capacity of the granite powders was assessed in short- (2-3 h) and medium-term (1-30 d) experiments. The powders showed a buffering capacity at around pH 8, which corresponded to the rapid dissolution of basic cations, and another buffering effect at pH<4.5, attributable to the dissolution of Fe and Al. The acid neutralizing capacity (ANC) determined in the short-term experiments, to a final pH of 4.5, varied between 5 and 61 cmol H+kg(-1) powder. The ANC to pH 4.5 obtained in the medium-term experiments was much higher than that obtained in the short-term experiments, reaching a maximum ANC value of 200 cmol H+kg(-1) powder. There was no great difference in the neutralizing capacity determined at between 1 and 30 d. The most abundant elements in acid solutions obtained at the end of medium-term experiments were Mg and Ca for disc saw powders, whereas Ca and Fe (at pH<5) were the most soluble elements in the bandsaw powders. The rapid release of these cations suggests the possible effective use of the granite powders as a source of nutrients on being added to acid soils.     

Spatio-temporal geostatistical modelling of sulphate concentration in the area of the Reocín Mine (Spain) as an indicator of water quality

Environmental Science and Pollution Research - Water stored in open-pit lakes can be a water resource when the mine is closed. This study aimed to develop a reliable model to evaluate the water...     

Fractionation and mobility of metals in bauxite red mud

Red mud (RM) is a strongly alkaline residue generated in enormous amounts worldwide from bauxite refining using the Bayer chemical process. RM is composed mainly of Fe, Ti and Al oxides and hydroxides, but it also contains an array of trace metals and metalloids at different concentrations. The purpose of this paper is to assess the potential mobility of metals in RM, with special emphasis on pH effect. The ‘operational’ distribution and leachability of metals within/from RM was studied by applying a sequential extraction procedure (SEP) and several leaching tests (rapid titration, equilibration acidification, batch leaching with acetic acid and also the toxicity characteristics leaching procedure (TCLP) and the DIN 38414-S4 procedures, used as reference methods) carried out at different pH, solid/liquid ratio, extraction period and type of acid (HCl or acetic acid). Chemical analysis showed that, in addition to the major metals Fe, Al and Ti, RM contains several trace metals, some of them (Cr, Cu and Ni) in concentrations exceeding the regulatory limits. SEP showed that a majority of the metals in the RM (between the 32.2?±?8.5 for Cd and 95.3?±?0.4 % for Ni) were found in the residual fraction, suggesting that they are not readily mobile under normal environmental conditions. Leaching tests performed at different pH showed that a significant fraction of the metals is mobilised from RM only under very strong acid conditions (pH?<?2), whereas Al is released in considerable amounts at pH?<?5.3. Among the trace metals, Cr requires special attention because of its relative high concentration in RM and the higher concentrations of this metal mobilised at low pH. The leaching tests using acetic acid showed that the standard TCLP largely underestimates the release of trace metals from RM, and therefore it is not advisable to evaluate the actual potential leaching of trace metals from this residue.