CFD Investigation of Particle Deposition in a Horizontal Looped Turbulent Pipe Flow

This paper presents comprehensive 3D numerical investigations on depositions of particles flowing through a horizontal pipe loop consisting of four bends. The multiphase mixture model available in FLUENT 6.2 was used in this study. In this numerical simulation, five different particle sizes have been used as secondary phases to calculate real multiphase effect in which inter-particle interaction has been considered. The deposition of particles along the periphery of the pipe wall was investigated as a function of particle size and fluid velocity. The simulations showed that near the upstream of the bends, maximum particle concentration occurred at the bottom of the pipe. However, downstream the bends, the maximum particle concentration occurred at an angle of 60° from the bottom. The larger particles clearly showed deposition near the bottom wall except downstream. As expected, the smaller particles showed less tendency of deposition and lesser at higher velocity. This numerical investigation showed qualitative agreement with the experiments conducted by Commonwealth Scientific and Industrial Research Organisation, Melbourne team for similar conditions.     

Extended Analytical Turbulent Diffusion Model for Particle Dispersion and Deposition in a Horizontal Pipe: Comparison with CFD Simulation

A 2D analytical turbulent diffusion model for particle dispersion and deposition at different heights along the pipe flow and circumferential deposition has been developed. This liquid–solid turbulent diffusion model presented in this paper has emanated from an existing gas–liquid turbulent diffusion model. This model can be used as a handy tool for quick estimation one and two-dimensional deposition fluxes of particles in water distribution networks. A comprehensive 3D numerical investigation has been carried out using multiphase mixture model available in “Fluent 6.2” to verify the above analytical model. Different particles sizes and densities were used for 3D numerical investigations. The deposition was studied as a function of particle diameter, density, and fluid velocity. The deposition of particles, along the periphery of the pipe wall and at different depths, was investigated. Both the models findings matched with qualitative phenomena such as deposition of heavier particles at the bottom of the pipe wall were higher at lower velocities and lower at higher velocities. The lighter particles were found mostly suspended with homogeneous distribution. Smaller particles were also suspended with marginal higher concentration near the bottom of the pipe wall. This marginal higher concentration of the smaller particles was found to be slightly pronounced for lower velocity. These analogies of particles are well discussed with the ratio between free-flight velocity and the gravitational settling velocity. Extended analytical model results were compared with the 3D computational fluid dynamics simulation results. Discrepancies in the model results were discussed.     

Energy consumption,emissions and economic growth in Bahrain

This study examines the Granger causality relationships between economic growth, energy consumption and emissions, from 1980 to 2007 in Bahrain, controlling for capital and urban population using Toda and Yamamoto’s approach. It was found that there is unilateral causality which runs from urban population, economic growth, capital and energy consumption to environment. Further, we found strong support for causality running from economic growth to energy consumption, emissions and capital. The existence of these linkages suggests that the government of Bahrain may pursue energy efficiency strategies and carbon emissions reduction policy in the long run without impeding economic growth. Additionally, the long run pursuit of high economic growth given sustained increases in energy efficiency may also reduce CO₂ emissions intensity per unit of her GDP.     

Spatial distribution of polybrominated diphenyl ethers in coastal marine sediments receiving industrial and municipal effluents in Kuwait

Polybrominated diphenyl ether (PBDE) concentrations were measured in surficial sediments from coastal sediments receiving industrial and municipal effluents in Kuwait. The summation PBDE concentrations varied by two orders of magnitude ranging from 80 to 3800 pg g(-1)dw. The congener distribution was dominated by BDE 183, with minor contributions from BDEs 154 and 153. The similarity between the congener profile to that of the technical octa formulation (Bromkal 79-8DE) suggests a source of this product in Kuwait. The observed gradient in concentration distribution, with high summation PBDE concentrations near the shore and an exponential decrease seaward, indicates that wastewater discharge from industrial activities in the study area is the primary source of these compounds in the sediments.     

A choice experiment analysis for solid waste disposal option: a case study in Malaysia

In Malaysia, most municipal wastes currently are disposed into poorly managed 'controlled tipping' systems with little or no pollution protection measures. This study was undertaken to assist the relevant governmental bodies and service providers to identify an improved waste disposal management strategy. The study applied the choice experiment technique to estimate the nonmarket values for a number of waste disposal technologies. Implicit prices for environmental attributes such as psychological fear, land use, air pollution, and river water quality were estimated. Compensating surplus estimates incorporating distance from the residences of the respondents to the proposed disposal facility were calculated for a number of generic and technology-specific choice sets. The resulting estimates were higher for technology-specific options, and the distance factor was a significant determinant in setting an equitable solid waste management fee.     

Impacts of COVID-19 on Sustainable Development Goals and effective approaches to maneuver them in the post-pandemic environment

Environmental Science and Pollution Research - In the pursuit of constructing a sustainable world for all through the instrumental seventeen Sustainable Development Goals, the COVID-19 pandemic...     

Flora biodiversity change detection: a case study

Changes in flora biodiversity are a dilemma facing managers in order to cope with challenges of extinction or endangering plant species as well as replacement by invasive species. Such problems can occur in the region as disruption of ecosystem balance. The first step of proper management of a watershed is obtaining accurate information about plant communities and their dominance and biodiversity status. Such information will help decision makers to adopt an appropriate management approach. Accordingly, the current study was conducted to detect various types of plant species in Zanjanrood Watershed. For this porous, quadrate and transect methods were applied to determine available plant species in the region. Afterwards, Shannon and Simpson’s Reciprocal indices were used to specify the biodiversity status of the identified communities. The calculation results revealed 3.19 and 5.98 for Shannon and Simpson’s Reciprocal indices, respectively. As the results suggested, there has been a downward trend in biodiversity status over the last 20 years. Such a deteriorating condition has been accelerated rise in recent years so that the non-palatable species are rapidly replaced by the palatable ones due to uncontrolled overgrazing of livestock. If management is not based on principles of sustainability in the region, the watershed will experience an extreme poverty of land cover. The findings would be so helpful to achieve an appropriate strategy in order to conserve the biodiversity in a sustainable manner.     

Fog as a Fresh-Water Resource: Overview and Perspectives

The collection of fog water is a simple and sustainable technology to obtain fresh water for afforestation, gardening, and as a drinking water source for human and animal consumption. In regions where fresh water is sparse and fog frequently occurs, it is feasible to set up a passive mesh system for fog water collection. The mesh is directly exposed to the atmosphere, and the foggy air is pushed through the mesh by the wind. Fog droplets are deposited on the mesh, combine to form larger droplets, and run down passing into a storage tank. Fog water collection rates vary dramatically from site to site but yearly averages from 3 to 10 l m⁻² of mesh per day are typical of operational projects. The scope of this article is to review fog collection projects worldwide, to analyze factors of success, and to evaluate the prospects of this technology.     

Simultaneous spectrophotometric determination of crystal violet and malachite green in water samples using partial least squares regression and central composite design after preconcentration by dispersive solid-phase extraction

In this paper, a simple, fast, and inexpensive method is introduced for the simultaneous spectrophotometric determination of crystal violet (CV) and malachite green (MG) contents in aquatic samples using partial least squares regression (PLS) as a multivariate calibration technique after preconcentration by graphene oxide (GO). The method was based on the sorption and desorption of analytes onto GO and direct determination by ultraviolet–visible spectrophotometric techniques. GO was synthesized according to Hummers method. To characterize the shape and structure of GO, FT-IR, SEM, and XRD were used. The effective factors on the extraction efficiency such as pH, extraction time, and the amount of adsorbent were optimized using central composite design. The optimum values of these factors were 6, 15 min, and 12 mg, respectively. The maximum capacity of GO for the adsorption of CV and MG was 63.17 and 77.02 mg g^?1, respectively. Preconcentration factors and extraction recoveries were obtained and were 19.6, 98% for CV and 20, 100% for MG, respectively. LOD and linear dynamic ranges for CV and MG were 0.009, 0.03–0.3, 0.015, and 0.05–0.5 (μg mL^?1), respectively. The intra-day and inter-day relative standard deviations were 1.99 and 0.58 for CV and 1.69 and 3.13 for MG at the concentration level of 50 ng mL^?1, respectively. Finally, the proposed DSPE/PLS method was successfully applied for the simultaneous determination of the trace amount of CV and MG in the real water samples.     

House dust as a source of human exposure to polybrominated diphenyl ethers in Kuwait

This study reports concentrations of polybrominated diphenyl ethers (PBDEs) in dust samples collected from 17 homes in Kuwait. PBDEs were measured in all homes investigated with mean summation operatorPBDEs concentration ranging from 1 to 393 ng g(-1), with a geometric mean of 76 ng g(-1). The dominant congener in all samples was BDE 209 constituting ca. 85% of the summationPBDEs followed by BDE 99 (5%), BDE 47 (4.5%), and BDE 183 (2%). The congener mixture in dust is dominated by those in deca and penta formulations. Using the measured concentrations and estimates of dust ingestion rates for children and adults, estimated human non-dietary exposure based on mean PBDE levels were 14.8 and 1.5 ng day(-1) for children and adults, respectively. The 10-fold difference in exposure estimates between children and adults in this study supports previous reports that children are at greater risk from pollutants that accumulate indoors. The ubiquitous distribution of these chemicals as noted in this study highlights the fact that we are continuously exposed to low doses of chemicals in the indoor environment.