Ultrasound-assisted electrodeposition synthesis of nZVI-Pd/AC toward reductive degradation of methylene blue

Environmental Science and Pollution Research - A novel composite (nZVI/Pd-AC) was prepared by loading nanoscale zero-valent iron (nZVI) and Pd on activated carbon (AC) electrode under...     

Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.     

1968～2018年洞庭湖江湖连通河道松滋口冲淤变化特征

探究江湖连通河道演变态势是评估重大人类活动事件对江湖关系变化影响的重要环节。以洞庭湖—荆江三口中松滋口河道为研究对象，通过建立其河道长期的水位—流量关系曲线分析其河道的冲淤变化特征，对其河道冲淤变化驱动因素进行分析，并采用实测河道断面资料验证其结果的可靠性。结果表明：水位—流量关系曲线法分析河道地形冲淤演变特征与实测横断面地形资料分析结果一致，松滋口河道同流量下水位下降对应于该时期河道冲刷，同流量下水位上升对应于河道淤积。不同时期松滋口东西分支河道冲淤变化主要驱动因素不同。1968～1981年间，下荆江裁弯引起的河势变化是西支新江口河道冲刷与东支沙道观河道淤积的主要诱因。1981～2003年间，其东西两支河道淤积主要是由于葛洲坝运行后引起的上荆江河道冲刷导致的。2003～2018年间，其河道冲刷主要是由于三峡大坝运行引起的河道水沙比例的大幅改变导致的。     

Treibhausgasemissionen zukünftiger Erdgasbereitstellung für Deutschland

Ohne Zusammenfassung Original erschienen in UWSF – Z Umweltchem ?kotox 20(2):133–144 (2008) DOI: Herausgeber: Martin Pehnt und Eckard Helmers     

Development of a test method against hot alkaline chemical splashes.

High temperature alkaline chemical liquids have caused injuries and hazardous situations in Finnish pulp manufacturing mills. There are no requirements and/or test method standards concerning protection against high temperature alkaline chemical splashes. This paper describes the test method development process to test and identify materials appropriate for hot liquid chemical hazard protection. In the first phase, the liquid was spilled through a stainless steel funnel and the protection performance was evaluated using a polyvinyl chloride (PVC) film under the test material. After several tentative improvements, a graphite crucible was used for heating and spilling the chemical, and a copper-coated K-type thermometer with 4 independent measuring areas was designed to measure the temperature under the material samples. The thermometer was designed to respond quickly so that peak temperatures could be measured. The main problem was to keep the spilled amount of chemical constant, which unfortunately resulted in significant variability in data.     

溶胶凝胶法制备磷钨酸掺杂TiO2薄膜及其光催化性能

以钛酸四丁酯为前驱物,采用溶胶凝胶法制备了磷钨酸掺杂的二氧化钛薄膜.通过XRD、FT-TR对该薄膜进行了表征,研究了薄膜在对氯苯酚光降解中的催化活性.结果表明,当磷钨酸与二氧化钛摩尔比为0.01:1、薄膜烧结温度600℃、对氯苯酚溶液浓度30 mg/L(pH＝5)、光催化8 h的条件下,对氯苯酚的降解率超过90%,且薄膜可以重复使用.磷钨酸对二氧化钛的光催化活性具有明显的促进作用.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Effect of combined addition amount of nano zero-valent iron and biochar on methane production by anaerobic digestion of corn straw

Environment, Development and Sustainability - Anaerobic digestion (AD) is an attractive straw resource treatment technology as it can improve the utilization efficiency of straw resource. Raw straw...