采样高度和降雪对大气污染物监测结果的影响

大气中SO_2、NO_x、TSP和CO平行采样监测结果的统计分析表明,地面与楼顶采样的差异不显著,其浓度变化有随高度呈规律性的变化趋向,降雪具有明显的洗脱清除作用。     

Influence of Al-oxide on pesticide sorption to woody biochars with different surface areas

Biochars’ properties will change after application in soil due to the interactions with soil constituents, which would then impact the performance of biochars as soil amendment. For a better understanding on these interactions, two woody biochars of different surface areas (SA) were physically treated with aluminum oxide (Al-oxide) to investigate its potential influence on biochars’ sorption property. Both the micropore area and mesopore (17～500 Å in diameter) area of the low-SA biochar were enhanced by at least 1.5 times after treatment with Al-oxide, whereas the same treatment did not change the surface characteristics of the high-SA biochar due partly to its well-developed porosity. The enhanced sorption of the pesticide isoproturon to the Al-oxide-treated low-SA biochar was observed and is positively related to the increased mesopore area. The desorption hysteresis of pesticide from the low-SA biochar was strengthened because of more pesticide molecules entrapped in the expanded pores by Al-oxide. However, no obvious change of pesticide sorption to the high-SA biochar after Al-oxide treatment was observed, corresponding to its unchanged porosity. The results suggest that the influence of Al-oxide on the biochars’ sorption property is dependent on their porosity. This study will provide valuable information on the use of biochars for reducing the bioavailability of pesticides.     

Recovery of silicon powder from kerf loss slurry waste using superconducting high gradient magnetic separation technology

A major challenge in recycling of silicon powder from kerf loss slurry waste is the complete removal of metal particles. The traditional acid leaching method is costly and not green. In this paper, a novel approach to recover high-purity Si from the kerf loss slurry waste of solar grade silicon was investigated. The metal impurities were removed with superconducting high gradient magnetic separation technology. The effects of process parameters such as magnetic flux density, slurry density, and slurry flow velocity on the removal efficiency were investigated, and the parameters were optimized. In one lot of control experiments, the silicon content was increased from 90.91 to 95.83%, iron content reduced from 3.24 to 0.57%, and aluminum content from 2.44 to 1.51% under the optimum conditions of magnetic flux density of 4.0 T, slurry density of 20 g/L, and slurry flow velocity of 500 mL/min. The result indicates that the superconducting high gradient magnetic separation technology is a feasible purifying method, and the magnetic separation concentrate could be used as an intermediate product for high-purity Si powder.

     

临安区不同功能区道路降雨径流重金属污染特征及源解析

于2017—2018年对临安区不同功能区的道路进行道路降雨径流采样,分析降雨量、季节变化和街尘对临安区道路降雨径流重金属污染特征的影响,并运用主成分分析法进行重金属源解析。结果表明,临安区道路降雨径流污染较严重;降雨强度越大,重金属浓度下降更快且末期浓度更低;道路降雨径流中Cu呈现春夏季大于秋冬季,Zn、Cr呈现秋冬季大于春夏季,Pb、Ni呈现冬春季大于夏秋季的季节变化趋势;临安区街尘与道路降雨径流重金属污染存在一定的相关性;主成分分析表明重金属污染源主要为以电线电缆为主的工业活动和汽车损耗。     

高效聚磷菌Alcaligenes sp. ED-12菌株的分离鉴定及其除磷特性

利用经典的微生物筛选方法,从福州市闽侯县上街镇高岐村某排污口淤泥中分离出1株高效聚磷菌,并结合16S rRNA基因序列分析进行了菌株鉴定.结果表明,该菌株为产碱杆菌,将其命名为Alcaligenes sp.ZGED-12.理化因素实验显示,在以乙酸钠为碳源、NH4Cl为氮源,当C/N为3∶1,pH为8.0,温度和摇床转速分别为35℃和100 r·min-1时,该菌株的生长状态最好,对磷的去除能力也最强,最高除磷率可达80%.此外,该菌株能够耐受较高浓度的磷,当磷浓度超过45 mg·L-1时会产生抑制效应.同时,以聚乙烯醇(PVA)和海藻酸盐(SA)制备了聚磷微生物固定化小球,并考察了菌球对氮磷废水的净化效果.结果表明,氮磷的去除包括固定化材料的吸附作用及微生物的生长利用和/或贮存,显示出了良好的应用前景.     

电芬顿法处理重金属络合物Ni-EDTA的研究

本文首先研究了电絮凝与电芬顿对Ni-EDTA去除效率对比,结果发现电絮凝对Ni-EDTA去除效率较低.通过电化学阳极溶解产生Fe2+,外加H2O2反应的阳极电芬顿过程可有效去除Ni-EDTA.详细考察Ni-EDTA初始浓度、电流密度、p H值及H2O2投加量对Ni-EDTA去除率的影响.结果表明,电芬顿方法处理Ni-EDTA络合物其初始浓度越低,去除效果越好.反应最佳p H值为3.5,H2O2投加量在一定条件下存在最优值,而络合物的去除率随着电流密度的增加而提高.对Ni-EDTA去除过程进行了分析.     

Neighborhood form and CO2 emission: evidence from 23 neighborhoods in Jinan, China

To understand the household C02 emission level in China, as well as how much the neighborhoods＇ socio-economic or design factors could influence the CO2 emission, 23 neighborhoods in Jinan were investigated in 2009 and 2010. These neighborhoods fall into four different types： superblock, enclave, grid and traditional. The household CO2 emission includes sources of both in- home energy use and passenger transportation. The average CO2 emission per household is 7.66 t.a^-1, including 6.87 t in-home operational emission and 792 kg transportation emission. The household CO2 emission by neighborhood categories is 10.97, 5.65, 6.49, 5.40 t-household-1. a-1 for superblock, enclave, grid and tradi- tional respectively. Superblock has the highest average emission and also the highest percent （more than 25%） of transportation emission among four different types of neighborhoods. The residential CO2 emission of superb- lock neighborhoods in Jinan has already reached the level in developed countries nearly ten years ago. It is predictable that more superblock neighborhoods would be built in China with the fast urbanization. How to avoid the rapid household CO2 emission growth in the future would be a systematic issue. The study also found that in addition to income and apartment area, household density, land use mix and accessibility to public transportation are three primary factors which have significant impacts on CO2 emission. High density, mixed land use and convenient accessibility to public transportation tend to reduce household CO2 emission.     

拉伸加载下老化复合固体推进剂的损伤演化定量分析

目的 定量分析老化对拉伸加载下复合固体推进剂细观损伤演化的影响规律。方法 开展不同老化时间（0、32、74、98 d）下三组元端羟基聚丁二烯（HTPB）复合固体推进剂的热加速老化试验,以及老化后推进剂的微型哑铃形试验件在不同拉伸应变水平（0、5%、10%、20%、40%、50%）下的微CT扫描观测试验,并对扫描重构图像进行定量分析,获得老化对推进剂细观损伤演化的影响规律。结果 随拉伸应变增加,老化前后推进剂微CT图像的灰度均方差、平均孔隙率和图像的分形维数均呈非线性增加趋势,图像的灰度均值呈非线性减小趋势。在较低应变水平（<10%）下,上述参数受老化时间的影响不显著,但随拉伸应变增加（≥10%）和老化时间增长,灰度均方差、平均孔隙率、孔隙率增量和分形维数的数值整体增高,而灰度均值随老化时间的增长而降低,且不同老化时间下,分形维数与平均孔隙率之间存在正线性关系。结论 重构得到微CT图像的灰度均值、平均孔隙率和分形维数可作为表征参数,用于定量分析老化复合固体推进剂在拉伸载荷下的细观损伤和损伤的动态演化规律,推进剂的初始损伤和小应变下的损伤程度受老化的影响较弱,而老化时间对推进剂细观损...     

密度泛函方法预测二英类化合物(PCDD/Fs)的正辛醇/水分配系数

在B3LYP/6-31G水平上全优化计算了多氯代二苯并—对-二英和多氯代二苯并呋喃(PCDD/Fs)系列物的分子结构;基于得到的分子结构描述符,依据修正的线性溶解能理论,分别建立了PCDDs和PCDFs的正辛醇/水分配系数的定量结构-性质关系模型(R2分别为0.985和0.966),并用交叉验证法对模型进行了验证(q2分别为0.983和0.936),用t-检验对各变量进行了检验.检验结果表明,模型的预测能力优于AM1法、单苯环氯取代指数法和拓扑量子方法得出的模型.     

透析对施氏矿物微观结构及其砷吸附能力的影响

探讨透析对施氏矿物微观结构和砷吸附能力的调控,对高效合成施氏矿物,进而将其应用于含砷地下水处理具有重要意义.本研究在利用FeCl_3·6H_2O与Na_2SO_4合成施氏矿物的基础上,用截留分子量100000 Da和20000 Da透析袋分别对施氏矿物透析10 d与20 d,探究了透析过程对施氏矿物产生量、比表面积、孔体积、平均孔径等矿物特征的影响,并考察了透析前后施氏矿物对废水中砷的吸附去除效果.研究结果表明,透析过程可显著提高矿物的合成量,增加矿物比表面积及孔体积,增加矿物的平均孔径.施氏矿物在截留分子量100000 Da与20000 Da透析袋中透析20 d,矿物产生量分别增加70.70%与79.84%;比表面积分别增加68.75%与45.85%;其中微孔(2 nm)比表面积增加439.90%与395.11%,中孔(2～50 nm)比表面积增加30.63%与9.96%;孔体积分别增加332.79%与287.25%,其中微孔体积增加491.61%与419.92%,中孔体积增加了220.36%与211.95%,透析后矿物平均孔径增长了214.77%与244.31%;矿物对污水中砷的吸附去除能力提高65.60%与64.74%.本研究结果可为化学合成施氏矿物改性并将其应用于地下水除砷领域提供必要的参数支撑.