Physico-chemical removal of iron from semi-aerobic landfill leachate by limestone filter

Limestone has been proven effective in removing metals from water and wastewater. A literature review indicated that limestone is capable of removing heavy metals such as Cu, Zn, Cd, Pb, Ni, Cr, Fe and Mn are through a batch process or by filtration technique. The removal capability is reported at up to 90%. However, to date most of the studies have been focused on synthetic wastewater. The present study attempts to investigate the suitability of limestone to attenuate total iron (Fe) from semi aerobic leachate at Pulau Burung Landfill Site in Penang, Malaysia. Iron was found in significant quantities at the landfill site. The study also aims to establish the Fe isotherm and breakthrough time of the proposed limestone filter for post-treatment to the migrating landfill leachate before its release to the environment. The Fe isotherms were established using a batch equilibrium test, while the breakthrough characteristics were determined using continuous flow permeating through a limestone column. The latter was used in order to simulate the continuous flow of leachate that would occur in the proposed limestone filter. The limestone media used in the experiment contain more than 90% CaCO3 with particle sizes ranging from 2 to 4 mm. Four filter columns (each 150 mm in diameter and 1000 mm depth) were installed at the landfill site. Metal loadings were kept below 0.5 kg /m3 day and the experiment was run continuously for 30 days. Initial results indicated that 90% of Fe can be removed from the leachate based on retention time of 57.8 min and surface loading of 12.2 m3/m2 day. For the batch study on the Fe isotherm, the results indicated that limestone is potentially useful as an alternative leachate treatment system at a relatively low cost.     

A study of the heavy metal concentrations of the Singapore River

The concentrations of lead, cadmium, copper, zinc, iron, and mercury in the water, sediment and biota of the Singapore River were determined. The concentration of the various metals in water showed significant variation at different sampling times and there was enrichment of lead content. The spatial patterns of metal distribution in the sediment could be due to the different pollution sources such as exhaust emission from boats and other environmental variables such as clay content of sediment or tide level. In the biota, higher amounts of metals were found in species inhabiting the river bed while organisms of higher trophic level such as free-swimming fishes and crabs accumulated lower amounts. In general, the flesh of fishes and crabs had the least content of metals compared to other tissues. The Concentration of various metals in bivalve, Mytilopsis sallei, which were found extensively in the river did not reflect the pollution distribution.     

Toxicity evaluation of ZnO and TiO2 nanomaterials in hydroponic red bean (Vigna angularis) plant: Physiology, biochemistry and kinetic transport

The toxicity and kinetic uptake potential of zinc oxide(Zn O) and titanium dioxide(TiO_2)nanomaterials into the red bean(Vigna angularis) plant were investigated. The results obtained revealed that Zn O, due to its high dissolution and strong binding capacity, readily accumulated in the root tissues and significantly inhibited the physiological activity of the plant. However, TiO_2 had a positive effect on plant physiology, resulting in promoted growth. The results of biochemical experiments implied that Zn O, through the generation of oxidative stress, significantly reduced the chlorophyll content, carotenoids and activity of stress-controlling enzymes. On the contrary, no negative biochemical impact was observed in plants treated with TiO_2. For the kinetic uptake and transport study, we designed two exposure systems in which Zn O and TiO_2 were exposed to red bean seedlings individually or in a mixture approach. The results showed that in single metal oxide treatments, the uptake and transport increased with increasing exposure period from one week to three weeks.However, in the metal oxide co-exposure treatment, due to complexation and competition among the particles, the uptake and transport were remarkably decreased. This suggested that the kinetic transport pattern of the metal oxide mixtures varied compared to those of its individual constituents.     

The relative importance of factors influencing the adoption of sustainable agricultural practices: a factor approach for Malaysian vegetable farmers

This study develops the understanding of the adoption of sustainable agricultural practices (SAPs) by investigating the relative importance of a set of multidimensional factors in the Malaysian vegetable production sector. A factor approach is deployed to identify explanatory indicators within an integrative framework that is synthesized from the theory of interpersonal behavior and the theory of diffusion of innovation. We achieved this by analyzing a logistic regression model for the adoption of six individual SAPs (conservation tillage, intercropping, cover crops/mulches, crop rotation, organic fertilizers/composts, and integrated pest management). The findings indicate that adoption depends on a range of socio-economic, agro-ecological, institutional, informational, and psychological factors, as well as the perceived attributes of SAPs. Fundamental policy understanding of the issue should, therefore, be multidisciplinary. In addition, standardized coefficients reveal that the impact of statistically significant factors on adoption is unequal. In general, the most influential factor is the asymmetric distribution of resources across geographical locations. This is followed by financial capital and a number of factors, including the workforce size, the usefulness of information, Chinese ethnicity, and the perceived relative advantage of SAPs. Guided by this prioritization understanding, future SAPs promotion now has a better opportunity to target the more important areas. Similar research effort should be made to steer sustainable agriculture internationally.     

Determinants of privatized solid waste management service provision in Lagos

The growing popularity of privatized solid waste management service in least developed countries warrants an exploration of factors that are likely to impact on its sustainability. This study takes integrated solid waste management approach by analyzing relevant issues on both market sides. We use a three step theme development sequence to analyze the data obtained on service providers through library research, observations and interviews. This was followed by an opinion survey on the demand side to elicit households’ support for service improvement. Findings show that source-separation issues, government enforcement, market segmentation, financial issues and waste disposal issues are key factors influencing improved service provision. Meanwhile, on the demand side, we found that households are willing to support proposed regulatory improvement in service provision. Thus, we suggest industrial stakeholders to consider the aforementioned supply side issues in designing future service improvements that will take advantage of existing demand side feasibility.     

Study of contaminant transport at an open-tipping waste disposal site

Field and laboratory studies were conducted to estimate concentration of potential contaminants from landfill in the underlying groundwater, leachate, and surface water. Samples collected in the vicinity of the landfill were analyzed for physiochemical parameters, organic contaminants, and toxic heavy metals. Water quality results obtained were compared from published data and reports. The results indicate serious groundwater and surface water contamination in and around the waste disposal site. Analysis of the organic samples revealed that the site contains polychlorinated biphenyls and other organo-chlorine chemicals, principally chloro-benzenes. Although the amount of PCB concentration discovered was not extreme, their presence indicates a potentially serious environmental threat. Elevated concentrations of lead, copper, nickel, manganese, cadmium, and cobalt at the downgradient indicate that the contamination plume migrated further from the site, and the distribution of metals and metals containing wastes in the site is nonhomogeneous. These results clearly indicate that materials are poorly contained and are at risk of entering the environment. Therefore, full characterization of the dump contents and the integrity of the site are necessary to evaluate the scope of the problem and to identify suitable remediation options.     

Co-combustion of agricultural residues with coal in a fluidized bed combustor

Power generation from biomass is an attractive technology that utilizes agricultural residual waste. In order to explain the behavior of biomass-fired fluidized bed incinerator, biomass sources from agricultural residues (rice husk and palm kernel) were co-fired with coal in a 0.15m diameter and 2.3m high fluidized bed combustor. The combustion efficiency and carbon monoxide emissions were studied and compared with those for pure coal combustion. Co-combustion of a mixture of biomass with coal in a fluidized bed combustor designed for coal combustion increased combustion efficiency up to 20% depending upon excess air levels. Observed carbon monoxide levels fluctuated between 200 and 900 ppm with the addition of coal. It is evident from this research that efficient co-firing of biomass with coal can be achieved with minimal modifications to existing coal-fired boilers.     

Allelopathic potential of Cistus ladanifer chemicals in response to variations of light and temperature

Summary. Earlier studies have demonstrated the allelopathic potential of the exudate of Cistus ladanifer leaves, and have identified the compounds responsible for the effect. It is here shown that the effect of each of these compounds and their interactions on germination and seedling development varies depending on the light and temperature parameters to which they are subjected. The allelochemicals show a fairly heterogeneous response when studied separately, there being no general pattern to the behaviour. When they act conjointly, however, their activity is enhanced by high temperatures, and the greatest phytotoxicity in inhibiting both germination and seedling development is attained with high temperatures and long photoperiods. These results suggest that the environmental factors temperature and photoperiod may alter the allelopathic effect of Cistus ladanifer. Received 5 December 2001; accepted 11 March 2002.     

The use of alum, ferric chloride and ferrous sulphate as coagulants in removing suspended solids, colour and COD from semi-aerobic landfill leachate at controlled pH.

Suspended solids, colour and chemical oxygen demand (COD) are among the main pollutants in landfill leachate. Application of physical or biological processes alone is normally not sufficient to remove these constituents, especially for leachate with a lower biochemical oxygen demand (BOD)/ COD ratio. The main objective of this research was to investigate the efficiency of coagulation and flocculation processes for removing suspended solids, colour and COD from leachate produced in a semi-aerobic landfill in Penang, Malaysia. A 12-month characterization study of the leachate indicated that it had a mean annual BOD/COD ratio of 0.15 and was partially stabilized, with little further biological degradation likely to occur. Particle size analysis of the raw leachate indicated that its 50th percentile (d50) was 11.68 microm. Three types of coagulants were examined in bench scale jar test studies: aluminium sulphate (alum), ferric chloride (FeCl3) and ferrous sulphate (FeSO4). The effects of agitation speed, settling time, pH, coagulant dosages and temperature were examined. At 300 rpm of rapid mixing, 50 rpm of slow mixing, and 60 min settling time, higher removals of suspended solids (over 95%), colour (90%) and COD (43%) were achieved at pH 4 and 12. FeCl3 was found to be superior to other coagulants tested. At pH 4 and 12, fair removal of suspended solids was observed at a reasonably low coagulant dose, i.e., 600 mg L(-1); hHowever, about 2500 mg L(-1) of coagulant was required to achieve good removals at pH 6. Better removals were achieved at higher temperature. The d50 of sludge after coagulation at pH 4 with a 2500 mg L(-1) FeCl3 dose was 60.16 microm, which indicated that the particles had been removed effectively from the leachate. The results indicate that coagulation and flocculation processes can be used effectively in integrated semi-aerobic leachate treatment systems, especially for removing suspended solids, colour and COD.     

Removal of ammoniacal nitrogen (N-NH3) from municipal solid waste leachate by using activated carbon and limestone.

The presence of ammoniacal nitrogen (N-NH3) in leachate is one of the problems normally faced by landfill operators. Slow leaching of wastes producing nitrogen and no significant mechanism for transformation of N-NH3 in the landfills causes a high concentration of ammoniacal nitrogen in leachate over a long period of time. A literature review showed that the removal of ammoniacal nitrogen from leachate was not well documented and to date, there were limited studies in Malaysia on this aspect, especially in adsorption treatment. The main objective of the present study was to investigate the suitability of activated carbon, limestone and a mixture of both materials as a filtering medium, in combination with other treatments capable of attenuating ammoniacal nitrogen which is present in significant quantity (between 429 and 1909 mg L(-1)) in one of the landfill sites in Malaysia. The results of the study show that about 40% of ammoniacal nitrogen with concentration of more than 1000 mg L(-1) could be removed either by activated carbon or a mixture of carbon with limestone at mixture ratio of 5:35. This result shows that limestone is potentially useful as a cost-effective medium to replace activated carbon for ammoniacal nitrogen removal at a considerably lower cost.