Toxic effect of alpha cypermethrin,an environmental pollutant,on myocardial tissue in male wistar rats

Environmental Science and Pollution Research - α-Cypermethrin (CYP) is a pyrethroid insecticide-like environmental pollutant, widely found in the environment. New research links exposure to...     

Evaluation of the waste heat discharged from the Di-ammonium Phosphate production plant: a case study

Journal of Material Cycles and Waste Management - This work presents an energy analysis of an industrial plant of production of Di-ammonium Phosphate (DAP plant). It aims to evaluate the important...     

Injection-Molded Bioblends from Lignin and Biodegradable Polymers: Processing and Performance Evaluation

This paper investigates the effects of the incorporation of lignin and small quantities of epoxidized natural rubber (ENR) as an impact modifying agent on blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL). The addition of lignin resulted in a slight improvement of flexural strength and modulus of the ternary blending system. Incorporation of ENR into the blend resulted in an increase in notched Izod impact strength from 40 to 135% depending on the concentration of ENR. The addition of lignin into the blend resulted in an improvement of thermal stability of the ternary blend system. Morphological analysis showed a good dispersion of PHBV phases and lignin within the PCL matrix. Rheological characterization revealed that the presence of lignin resulted in increased storage modulus of the bioblend.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

COVID-19 and beliefs about tobacco use: an online cross-sectional study in Iran

Environmental Science and Pollution Research - There is mixed evidence surrounding the relationship between tobacco use and COVID-19 infection/progression. The current study investigates beliefs...     

Photocatalytic and biodegradation treatments of paracetamol: investigation of the in vivo toxicity

Environmental Science and Pollution Research - Medicines and drugs consumption by all populations of the world can be expected to result in the contamination of the environment since 30–90%...     

单室MFC型生物毒性传感器对重金属离子的检测研究

构建了单室微生物燃料电池(air-cathode microbial fuel cell,ACMFC)型生物毒性传感器,以含重金属离子(Cd2+、Cu2+)人工配水为检测对象,分析了有毒物质对检测仪的抑制率与有毒物质浓度的线性关系.结果表明,①单室MFC型生物毒性传感器结构简单,操作方便,灵敏度较高,可用于水体重金属离子(Cd2+、Cu2+)生物毒性的快速检测;②在实验条件下,该生物毒性传感器检测时间4h,清洗时间2～10min,恢复时间4h;③检测结果显示,实验室自配Cd2+、Cu2+及其混合液IC20值分别为0.6、0.8和0.25mg/L,有毒物质浓度与MFC产电量的抑制率呈显著正相关,相关系数分别为0.9960、0.9744和0.9907.     

Cover crop effects on nitrous oxide emission from a manure-treated Mollisol

Agriculture contributes 40–60% of the total annual N₂O emissions to the atmosphere. Development of management practices to reduce these emissions would have a significant impact on greenhouse gas levels. Non-leguminous cover crops are efficient scavengers of residual soil NO₃, thereby reducing leaching losses. However, the effect of a grass cover crop on N₂O emissions from soil receiving liquid swine manure has not been evaluated. This study investigated: (i) the temporal patterns of N₂O emissions following addition of swine manure slurry in a laboratory setting under fluctuating soil moisture regimes; (ii) assessed the potential of a rye (Secale cereale L.) cover crop to decrease N₂O emissions under these conditions; and (iii) quantified field N₂O emissions in response to either spring applied urea ammonium nitrate (UAN) or different rates of fall-applied liquid swine manure, in the presence or absence of a rye/oat winter cover crop. Laboratory experiments investigating cover crop effects N₂O emissions were performed in a controlled environment chamber programmed for a 14 h light period, 18 °C day temperature, and 15 °C night temperature. Treatments with or without a living rye cover crop were treated with either: (i) no manure; (ii) a phosphorus-based manure application rate (low manure): or (iii) a nitrogen-based manure application rate (high manure). We observed a significant reduction in N₂O emissions in the presence of the rye cover crop. Field experiments were performed on a fine-loamy soil in Central Iowa from October 12, 2005 to October 2, 2006. We observed no significant effect of the cover crop on cumulative N₂O emissions in the field. The primary factor influencing N₂O emission was N application rate, regardless of form or timing. The response of N₂O emission to N additions was non-linear, with progressively more N₂O emitted with increasing N application. These results indicate that while cover crops have the potential to reduce N₂O emissions, N application rate may be the overriding factor.     

Evaluating the phytoremediation potential of Phragmites australis grown in pentachlorophenol and cadmium co-contaminated soils

Pot-culture experiments were conducted to evaluate the phytoremediation potential of a wetland plant species, Phragmites australis in cadmium (Cd) and pentachlorophenol (PCP) co-contaminated soil under glasshouse conditions for 70 days. The treatments included Cd (0, 5 and 50 mg kg^?1) without or with PCP (50 and 250 mg kg^?1). The results showed that growth of P. australis was significantly influenced by interaction of Cd and PCP, decreasing with either Cd or PCP additions. Plant biomass was inhibited and reduced by the rate of 89 and 92 % in the low and high Cd treatments and by 20 and 40 % in the low and high PCP treatments compared to the control. The mixture of low Cd and low PCP lessened Cd toxicity to plants, resulting in improved plant growth (by 144 %). Under the joint stress of the two contaminants, the ability of Cd uptake and translocation by P. australis was weak, and the BF and TF values were inferior to 1.0. A low proportion of the metal is found aboveground in comparison to roots, indicating a restriction on transport upwards and an excluding effect on Cd uptake. Thus, P. australis cannot be useful for phytoextraction. The removal rate of PCP increased significantly (70 %) in planted soil. Significant positive correlations were found between the DHA and the removal of PCP in planted soils which implied that plant root exudates promote the rhizosphere microorganisms and enzyme activity, thereby improving biodegradation of PCP. Based on results, P. australis cannot be effective for phytoremediation of soil co-contaminated with Cd and PCP. Further, high levels of pollutant hamper and eventually inhibit plant growth. Therefore, developing supplementary methods (e.g. exploring the partnership of plant–microbe) for either enhancing (phytoextraction) or reducing the bioavailability of contaminants in the rhizosphere (phytostabilization) as well as plant growth promoting could significantly improve the process of phytoremediation in co-contaminated soil.     

Statistical thermodynamics of adsorption of dye DR75 onto natural materials and its modifications: double-layer model with two adsorption energies

In this article, adsorption modelling was presented to describe the sorption of textile dye, Direct Red 75 (DR75), from coloured wastewater onto the natural and modified adsorbent, Posidonia oceanica. The formulation of the double-layer model with two energy levels was based on statistical physics and theoretical considerations. Thanks to the grand canonical ensemble in statistical physics some physico-chemical parameters related to the adsorption process were introduced in the analytical model expression. Fitting results show that the dye molecules are adsorbed in parallel position to the adsorbent surface. The magnitudes of the calculated adsorption energies show that the DR75 dye is physisorbed onto Posidonia. Both Van der Waals and hydrogen interactions are implicated in the adsorption process. Despite its simplicity, the model fits a wide range of experimental data, thereby supporting the underlying data that the grafted groups facilitate the parallel anchorage of the anionic dye molecule. Thermodynamic parameters, such as adsorption energy, entropy, Gibbs free adsorption energy and internal energy were calculated according to the double-layer model. Results suggested that the DR75 adsorption onto Posidonia was a spontaneous and exothermic process.