The potential of vehicle and road infrastructure interventions in fatal bicyclist accidents on Swedish roads—What can in-depth studies tell us?

Abstract

Objective: The objective of this article is to describe the characteristics of fatal crashes with bicyclists on Swedish roads in rural and urban areas and to investigate the potential of bicycle helmets and different vehicle and road infrastructure interventions to prevent them. The study has a comprehensive approach to provide road authorities and vehicle manufacturers with recommendations for future priorities.

Methods: The Swedish Transport Administration’s (STA) in-depth database of fatal crashes was used for case-by-case analysis of fatal cycling accidents (2006–2016) on rural (n?=?82) and urban (n?=?102) roads. The database consists of information from the police, medical journals, autopsy reports, accident analyses performed by STA, and witness statements. The potential of helmet use and various vehicle and road infrastructure safety interventions was determined retrospectively for each case by analyzing the chain of events leading to the fatality. The potential of vehicle safety countermeasures was analyzed based on prognoses on their implementation rates in the Swedish vehicle fleet.

Results: The most common accident scenario on rural roads was that the bicyclist was struck while cycling along the side of the road. On urban roads, the majority of accidents occurred in intersections. Most accidents involved a passenger car, but heavy trucks were also common, especially in urban areas. Most accidents occurred in daylight conditions (73%). Almost half (46%) of nonhelmeted bicyclists would have survived with a helmet. It was assessed that nearly 60% of the fatal accidents could be addressed by advanced vehicle safety technologies, especially autonomous emergency braking with the ability to detect bicyclists. With regard to interventions in the road infrastructure, separated paths for bicyclists and bicycle crossings with speed calming measures were found to have the greatest safety potential. Results indicated that 91% of fatally injured bicyclists could potentially be saved with known techniques. However, it will take a long time for such technologies to be widespread.

Conclusions: The majority of fatally injured bicyclists studied could potentially be saved with known techniques. A speedy implementation of important vehicle safety systems is recommended. A fast introduction of effective interventions in the road infrastructure is also necessary, preferably with a plan for prioritization.     

Solving Problems in Social–Ecological Systems: Definition, Practice and Barriers of Transdisciplinary Research

Translating policies about sustainable development as a social process and sustainability outcomes into the real world of social–ecological systems involves several challenges. Hence, research policies advocate improved innovative problem-solving capacity. One approach is transdisciplinary research that integrates research disciplines, as well as researchers and practitioners. Drawing upon 14 experiences of problem-solving, we used group modeling to map perceived barriers and bridges for researchers’ and practitioners’ joint knowledge production and learning towards transdisciplinary research. The analysis indicated that the transdisciplinary research process is influenced by (1) the amount of traditional disciplinary formal and informal control, (2) adaptation of project applications to fill the transdisciplinary research agenda, (3) stakeholder participation, and (4) functional team building/development based on self-reflection and experienced leadership. Focusing on implementation of green infrastructure policy as a common denominator for the delivery of ecosystem services and human well-being, we discuss how to diagnose social–ecological systems, and use knowledge production and collaborative learning as treatments.     

Protected Area as an Indicator of Ecological Sustainability? A Century of Development in Europe’s Boreal Forest

Protected area (PA) is an indicator linked to policies on ecological sustainability. We analyzed area, size, and categories of PAs in the European boreal forest biome in Norway, Sweden, Finland, and Russia from 1900 to 2010. The PA increased from 1.5 × 10³ ha in 1909 to 2.3 × 10⁷ ha in 2010. While the total PA in the boreal biome was 10.8 %, the figures ranged from 17.2 % in the northern, 7.9 % of the middle, and 8.7 % of the southern boreal sub-regions. The median size of PAs varied from 10 to 124 ha among countries. The categories of less strictly PAs increased over time. The proportion of area occupied by PAs is an important response indicator for conservation efforts. However, the use of PA as an indicator of ecological sustainability needs to consider ecosystem representation, functional connectivity and management categories.     

Learning About the History of Landscape Use for the Future: Consequences for Ecological and Social Systems in Swedish Bergslagen

Barriers and bridges to implement policies about sustainable development and sustainability commonly depend on the past development of social–ecological systems. Production of metals required integration of use of ore, streams for energy, and wood for bioenergy and construction, as well as of multiple societal actors. Focusing on the Swedish Bergslagen region as a case study we (1) describe the phases of natural resource use triggered by metallurgy, (2) the location and spatial extent of 22 definitions of Bergslagen divided into four zones as a proxy of cumulative pressure on landscapes, and (3) analyze the consequences for natural capital and society. We found clear gradients in industrial activity, stream alteration, and amount of natural forest from the core to the periphery of Bergslagen. Additionally, the legacy of top-down governance is linked to today’s poorly diversified business sector and thus municipal vulnerability. Comparing the Bergslagen case study with other similar regions in Russia and Germany, we discuss the usefulness of multiple case studies.     

Changes in pH as a measure of photosynthesis by marine macroalgae

An automatically operated method for high precision measurements of steady-state photosynthesis by macroalgae was developed. Changes in pH and oxygen content of seawater passing the algae in a flowthrough system, could be measured with extremely high accuracy over very long periods of time. The method is especially suitable for measurements on flowthrough systems with high rates of water exchanges (i.e. short retention time), and can be used to study exchange processes for marine plants, animals and small ecosystems. Since the same measuring unit is used for several flowthrough chambers, the method is very suitable for comparisons between different species, or between differently pretreated specimens of the same species (e.g. in toxicological studies). The method was used to study the ratio: [oxygen production] to [CO₂+H⁺ uptake] at different light intensities for several macroalgae belonging to different systematic groups and from different habitats. At lower photosynthetic rates this ratio was similar for all of the algae studied (1.17±0.02). For brown algae of the fucacean family, the ratio increased by 0.08 units at higher photosynthetic rates. This increase was thought to be related to the crassulacean acid metabolism (CAM)-like strategies connected to these algae. For all other algae studied, the ratio remained constant or decreased slightly (at most by 0.04 units) at higher photosynthetic rates. The relations between the abovementioned ratio and the photosynthetic quotient are discussed on a theoretical basis.     

Leaf ontogeny interacts with Bt modification to affect innate resistance in GM aspens

Bioassays with a non-target slug (Deroceras spp.) and chemical analyses were conducted using leaf tissue from already existing genetically modified insect-resistant aspen trees to examine whether genetic modifications to produce Bacillus thuringiensis (Bt) toxins could affect plant phytochemistry, which in turn might influence plant–herbivore interactions. Three major patterns emerged. First, two independent modifications for Bt resistance affected the phytochemical profiles of leaves such that both were different from the isogenic wild-type (Wt) control leaves, but also different from each other. Among the contributors to these differences are substances with a presumed involvement in resistance, such as salicortin and soluble condensed tannins. Second, bioassays with one Bt line suggest that the modification somehow affected innate resistance (“Innate” is used here in opposition to the “acquired” Bt resistance) in ways such that slugs preferred Bt over Wt leaves. Third, the preference test suggests that the innate resistance in Bt relative to Wt plants may not be uniformly expressed throughout the whole plant and that leaf ontogeny interacts with the modification to affect resistance. This was manifested through an ontogenetic determined increase in leaf consumption that was more than four times higher in Bt compared to Wt leaves. Our result are of principal importance, as these indicate that genetic modifications can affect innate resistance and thus non-target herbivores in ways that may have commercial and/or environmental consequences. The finding of a modification–ontogeny interaction effect on innate resistance may be especially important in assessments of GM plants with a long lifespan such as trees.     

Determination of resin acids during production of wood pellets--a comparison of HPLC/ESI-MS with the GC/FID MDHS 83/2 method

Resin acids are constituents of natural and technical products of widespread use. Exposure is known to cause health effects in the airways and on the skin. Liquid chromatography/positive ion electrospray-mass spectrometry (HPLC/pos ESI-MS) was investigated for determination of 7-oxodehydroabietic (7-OXO), dehydroabietic (DHAA) and abietic acid (AA) in wood dust-containing air samples as a derivatisation-free alternative to the GC/FID HSE method 83/2, developed by the Health and Safety Executive UK. The resin acid 7-OXO was measured as a marker for oxidised resin acids, which are known to be the main contact allergens in colophonium. The found detection limits were 0.42 ng m(-3) for 7-OXO, 5.2 ng m(-3) for DHAA and 9.4 ng m(-3) for AA, respectively, which are considerably lower than with the GC/FID method (24, 115 and 89 ng m(-3)). The two methods correlated well, although consistently and significantly lower concentrations of 7-OXO were detected with LC/MS. The higher concentration of this compound with MDHS 83/2 is suggested to be an artefact from the derivatisation step in the presence of soluble wood dust remains.     

Carbon acquisition strategies for marine macroalgae

A model system was developed to analyse differences in carbon acquisition strategies among macroalgae. During photosynthesis in a limited volume of seawater the capability of the algae to assimilate inorganic carbon as well as to change the alkalinity of the seawater was analysed. These properties were then related to the status of the carbonate equilibrium system of the seawater. The experimental system was assumed to simulate the conditions in the boundary layer during periods of low water exchange or high intensity irradiations. Fundamental differences were found between different algal classes, suggesting that capabilities to adapt to specific environmental conditions may be connected with dissimilarities in carbon acquisition strategies. In general, green algae were able to reach the highest pH (10.8 at 5°C), and thus to achieve the highest reduction in the level of inorganic carbon via a simple HCO₃ ^–/OH^– ion exchange process. For brown algae, pH increases due to carbon uptake never exceeded pH 9.7 (9.5 in a saltwater scale). In spite of this, members of the Fucaceae (littoral brown algae) were able to extract almost all of the dissolved inorganic carbon (DIC). This was achieved through a gradual decrease in the alkalinity of the enclosed water, so that the carbon assimilation could continue without any concomitant increase in pH. For red algae, the specific response was an increase in the level of inorganic carbon. Thus, for this algal class, no specific strategy for handling a shortage of inorganic carbon was documented. Within each algal class, differences in pH and DIC compensation points could be related to differences in the depths at which the algal species occurred. This paper also introduces a low cost and convenient method of analysing DIC in seawater.     

Photosynthesis and respiration in the alga Ahnfeltia plicata in a flow-through system

Photosynthesis and respiration in Ahnfeltia plicata (Huds.) Fries (Gigartinales) was measured in a seawater flowthrough system at different temperatures, salinities and photon flux densities (PFD). The exchanges of dissolved oxygen and inorganic carbon were continuously recorded with an oxygen probe and a pH electrode measuring variation in CO₂–HCO ₃ ^- equilibrium as pH changes. Highest apparent photosynthesis at moderate photon flux density (PFD 50 E m^-2 s^-1) was found at 15°C and 33 S. Photosynthesis was measured up to PFD 500 E m^-2 s^-1 and no light saturation was documented. In the present experimental set-up, with continuous supply of fresh seawater, the number of limiting factors during photosynthesis measurements is reduced.