Modeling perceived collision risk in port water navigation

An increase in the likelihood of navigational collisions in port waters has put focus on the collision avoidance process in port traffic safety. The most widely used on-board collision-avoidance system is the automatic radar plotting aid which is a passive warning system that triggers an alert based on the pilot’s pre-defined indicators of distance and time proximities at the closest point of approaches in encounters with nearby vessels. To better help pilot in decision making in close quarter situations, collision risk should be considered as a continuous monotonic function of the proximities and risk perception should be considered probabilistically. This paper derives an ordered probit regression model to study perceived collision risks. To illustrate the procedure, the risks perceived by Singapore port pilots were obtained to calibrate the regression model. The results demonstrate that a framework based on the probabilistic risk assessment model can be used to give a better understanding of collision risk and to define a more appropriate level of evasive actions.     

The relationship between flow and bacteria in streams

A method is proposed to relate the statistics of in-stream bacteria concentrations to the surface-runoff fraction of stream flow. The parameters of this relationship include the characteristic concentration of bacteria in surface runoff and the characteristic concentration of bacteria in the base flow, and these parameters can be derived from synoptic bacteria and flow measurements. The effectiveness of the proposed method is demonstrated at several U.S. locations for both Escherichia coli and fecal coliform bacteria. Application of the proposed method at a particular location showed that the method can be used to identify the most effective bacteria source controls and that conventional application of the load-duration curve might lead to erroneous identification of target sources.     

Influence of peatland and land cover distribution on fire regimes in insular Southeast Asia

Anthropogenic biomass burning in insular Southeast Asia facilitates conversion and degradation of ecosystems and emits high amounts of carbon into the atmosphere. We analyzed the influence of peat soil and land cover distribution on the occurrence and characteristics of vegetation fires. Two years of satellite-based active fire detections over Peninsular Malaysia, Sumatra, Borneo and Java were examined together with land cover and peatland maps. Our results showed that fire occurrence nearly tripled (23,000 → 68,000) from a wet La Niña year (2008) to a drier El Niño year (2009). In both years, fires were concentrated in peatlands (in 2009 41% of fires vs. 10% of land area), and the majority of large-scale burning took place in peatlands. Variation in peatland land cover within the study area was noticed to create remarkable different fire regimes. Biomass burning in the intensely managed Sumatran peatlands was characterized by large-scale land clearance fires that took place annually to varying extent. The largely unmanaged degraded peatland ecosystems of Borneo, on the other hand, experienced very little fire activity in a wet year but were ravaged by large-scale wildfires when El Niño conditions arose. We conclude that fire regime characteristics in insular Southeast Asia are strongly connected to occurrence of peat soil and land management status. This leads to high variation of fire activity within this region both annually (depending on weather patters) and over longer time range (depending on land cover/management issues) and greatly complicates estimation of the effects of fires.     

EDTA reduces lead accumulation in Symphytum officinale L. (comfrey) roots

The addition of EDTA in phytoextraction studies has been reported to increase heavy metal accumulation in above-ground parts or to have no negative impact on the overall (root/shoot) accumulation levels in terrestrial plants. At a purely quantitative level, this study assessed the phytoextraction potential of a previously untested high-biomass terrestrial plant, Symphytum officinale L. (comfrey), in the presence of Pb and EDTA. In this hydroponic-based study, we report a small increase in shoot accumulation of Pb with EDTA but, conversely, the presence of EDTA in the nutrient medium markedly reduced the overall quantity of Pb in the plant root by at least 80%. The loss does not appear to be explained by EDTA acting alone, increased transport of Pb to the shoots, or anionic charge repulsion of the [PbEDTA]^2? complex. The elusive action and negative effect of EDTA on Pb accumulation in S. officinale provides additional reasons towards a growing trend away from the use of EDTA as a chelating agent in phytoextraction.     

Effects of post-sampling conditions on ambient carbon aerosol filter measurements

Ambient carbonaceous material collected on quartz filters is prone to measurement artifacts due to material gained or lost during post-sampling field latency, shipping, and storage. In seventeen sampling events over a one year period, ambient PM_2.5 aerosols were collected on quartz filters (without denuders) and subjected to various filter treatments to assess the potential for and extent of artifacts. The filter treatments simulated post-sampling environments that filters may be exposed to and included: storage at 40 °C for up to 96 h, storage at ?16 °C for 48 h, and storage at room temperature (～21 °C) for 48 h. Carbon mass on the filters was measured using a thermal-optical method. The total carbon (TC), total organic carbon (TOC) and total elemental carbon (TEC) as well as carbon thermal fraction masses were obtained. Statistical analyses were performed to identify significant differences in carbon fraction concentrations between filters analyzed immediately after sampling and after being subjected to treatment.TOC and TC concentrations decreased by on average 15 ± 5% and 10 ± 4%, respectively, for filters maintained at 40 °C for 96 h but did not change for filters stored at room temperature or frozen for 48 h. TEC did not change for any of the filter treatments. The mass concentration for the organic carbon thermal fraction that evolves at the lowest temperature step (OC1) decreased with increasing storage time at 40 °C with average losses of 70 ± 7% after 96 h. Therefore, OC1 is not a stable measurement due to post-sampling conditions that may be encountered. This work demonstrates that TOC and TC can have substantial measurement artifacts on filters subjected to field latency and other non-temperature controlled post-sampling handling, compared to the carbon loadings on the filter at the end of the sampling period.     

Pollutant emission characteristics of rice husk combustion in a vortexing fluidized bed incinerator

Rice husk with high volatile content was burned in a pilot scale vortexing fluidized bed incinerator. The fluidized bed incinerator was constructed of 6 mm stainless steel with 0.45 m in diameter and 5 m in height. The emission characteristics of CO, NO, and SO2 were studied. The effects of operating parameters, such as primary air flow rate, secondary air flow rate, and excess air ratio on the pollutant emissions were also investigated. The results show that a large proportion of combustion occurs at the bed surface and the freeboard zone. The SO2 concentration in the flue gas decreases with increasing excess air ratio, while the NOx concentration shows reverse trend. The flow rate of secondary air has a significant impact on the CO emission. For a fixed primary air flowrate, CO emission decreases with the secondary air flowrate. For a fixed excess air ratio, CO emission decreases with the ratio of secondary to primary air flow. The minimum CO emission of 72 ppm is attained at the operating condition of 40% excess air ratio and 0.6 partition air ratio. The NOx and SO2 concentrations in the flue gas at this condition are 159 and 36 ppm, which conform to the EPA regulation of Taiwan.     

Food waste treatment in a community center

For urban community composting centers, the proper selection and use of bulking agent is a key element in not only the cost but also the quality of the finished compost. Besides wood chips (WC) widely used as BA, readily usable cereal residue pellets (CRP) can provide biodegradable carbon and sufficient free air space (FAS) to produce stabilizing temperatures. The objective of the present project was to test at a community center, the effectiveness of CRP in composting food waste (FW). Two recipes were used (CRP with and without WC) to measure: FAS; temperature regimes, and; losses in mass, water, carbon and nitrogen. Both recipes were composted during three consecutive years using a 2 m³ commercial in-vessel composter operated in downtown Montreal (Canada). For all recipes, FAS exceeded 30% for moisture content below 60%, despite yearly variations in FW and BA physical properties. When properly managed by the center operator, both FW and CRP compost mixtures with and without WC developed within 3 days thermophilic temperatures exceeding 50 °C. The loss of total mass, water, carbon and nitrogen was quite variable for both recipes, ranging from 36% to 54%, 42% to 55%, 48% to 65%, and 4% to 55%, respectively. The highest loss in dry mass, water and C was obtained with FW and CRP without WC aerated to maintain mesophilic rather than thermophilic conditions. Although variable, lower nitrogen losses were obtained with CRP and WC as BA, compared to CRP alone, as also observed during previous laboratory trials. Therefore and as BA, CRP can be used alone but nitrogen losses will be minimized by adding WC. Compost stabilization depends on operator vigilance in terms of aeration. The measured fresh compost density of 530-600 kg/m³ indicates that the 2 m³ in-vessel composter can treat 6.5 tons of FW/year if operated during 7 months.