Effective adsorbent for arsenic removal: core/shell structural nano zero-valent iron/manganese oxide

Recently, nano zero-valent iron (nZVI) has emerged as an effective adsorbent for the removal of arsenic from aqueous solutions. However, its use in various applications has suffered from reactivity loss resulting in a decreased efficiency. Thus, the aim of this study was to develop an effective arsenic adsorbent as a core/shell structural nZVI/manganese oxide (or nZVI/Mn oxide) to minimize the reactivity loss of the nZVI. As the major result, the arsenic adsorption capacities of the nZVI/Mn oxide for As(V) and As(III) were approximately two and three times higher than that of the nZVI, respectively. In addition, the As(V) removal efficiency of the nZVI/Mn oxide was maintained through 4 cycles of regeneration whereas that of the nZVI was decreased significantly. The enhanced reactivity and reusability of the nZVI/Mn oxide can be successfully explained by the synergistic interaction of the nZVI core and manganese oxide shell, in which the manganese oxides participate in oxidation reactions with corroded Fe²⁺ and subsequently retard the release of aqueous iron providing additional surface sites for arsenic adsorption. In summary, this study reports the successful fabrication of a core/shell nZVI/Mn oxide as an effective adsorbent for the removal of arsenic from aqueous solutions.     

Transition of human and livestock waste management in rural Hanoi: a material flow analysis of nitrogen and phosphorus during 1980–2010

Journal of Material Cycles and Waste Management - Human and livestock waste, i.e., excreta, were intensively used in crop cultivation in Asia over the years. However, rapid economic growth induced...     

Human factors and tidal influences on water quality of an urban river in Can Tho, a major city of the Mekong Delta, Vietnam

In this study, we focused on water quality in an urban canal and the Mekong River in the city of Can Tho, a central municipality of the Mekong Delta region, southern Vietnam. Water temperature, pH, electrical conductivity, BOD₅, COD_Cr, Na⁺, Cl^?, NH₄ ⁺?N, SO₄ ^2??S, NO₃ ^??N, and NO₂ ^??N for both canal and river, and tide level of the urban canal, were monitored once per month from May 2010 to April 2012. The urban canal is subject to severe anthropogenic contamination, owing to poor sewage treatment. In general, water quality in the canal exhibited strong tidal variation, poorer at lower tides and better at higher tides. Some anomalies were observed, with degraded water quality under some high-tide conditions. These were associated with flow from the upstream residential area. Therefore, it was concluded that water quality in the urban canal changed with a balance between dilution effects and extent of contaminant supply, both driven by tidal fluctuations in the Mekong River.     

Ontogenetic variation in metabolism, biochemical composition and energy content during the early life stages of Farfantepenaeus paulensis (Crustacea: Decapoda: Penaeidae)

Dry weight (DW), oxygen consumption, ammonia-N excretion, proximate biochemical composition (total protein, carbohydrate, lipid, water and ash), and energy content (estimated from biochemical composition and by wet combustion) were determined in early developmental stages of cultured Farfantepenaeus paulensis. Pooled samples from embryonic, larval and postlarval stages (at 26 ± 1 °C and 34 ± 1‰) were used for measurements. The study focused on physiological and biochemical processes during transitional periods of ontogeny, such as hatching, lecithotrophic and planktotrophic stages, metamorphosis, and the attainment of a benthic existence in postlarva. DW showed higher increment between protozoea I (PZ I) and mysis I (M I) than in the next mysid and postlarval stages. Individual rates of oxygen consumption and ammonia-N excretion increased, while weight-specific rates presented significant reduction throughout development. Higher weight-specific oxygen consumption was registered in nauplius III (N III) and PZ I, following a decrease in subsequent stages. Postlarval stages PL V–VI and PL X–XII exhibited the lowest values among the stages studied. Weight-specific excretion was high in N III and protozoeal stages, with maximum values in PZ II, while the following stages were marked by lower rates. O:N ratios indicated higher protein catabolism in the stages between egg and M I and a shift to more lipid utilization close to metamorphosis. Water content was higher in the protozoeal stages and decreased afterwards. Higher percentages of protein, lipid and carbohydrate (%DW) were observed in egg and nauplius stages. Protein and lipid decreased from the egg through the naupliar and protozoeal stages, rising again in mysis stages. Lipid content (%DW) decreased in PL V–VI and PL X–XII. Lipid:protein ratios showed an increase of the importance of lipid between PZ III and M II. Carbohydrates represented a minor fraction of body composition, and ash percentages increased from egg to a maximum in PZ II, decreasing in subsequent stages. Energy content determined by wet combustion or calculated by energy equivalents presented the same trend throughout development, varying similarly to protein. Protein was the main energy contributor to body energy in all stages, while the importance of lipid was higher in egg and early naupliar stages. Trends observed in metabolic rates and body composition may be associated to morphological and behavioral changes during the early stages of penaeid development, such as the transition from herbivory to omnivory, and the adoption of a benthic existence. Different ontogenetic energy strategies contribute to succeed through such diverse type of development. Received: 4 July 2000 / Accepted: 6 December 2000     

Vietnamese Uplands: Environmental and Socio-Economic Perspective of Forest Land Allocation and Deforestation Process

Vietnam, in the ongoing transition to market economies, has to cope with high rural poverty and a dramatic process of forest loss and environment degradation, particularly in the mountainous regions. The government considers rural poverty as the main cause of environment degradation, associated with slash-and-burn cultivation and to an unclear definition of property rights on forest land. In 1993, the government launched a Forest Land Allocation programme aiming to lease forest lands to individual households and, on this basis, to solve food security problems, halt the increasing environment degradation and preserve the remaining forests.To evaluate the results of this land reform policy, two upland pilot communes have been intensively monitored. The environmental and economic impacts of the forest land reform allocation in the two study areas are presented, after providing a background on the Vietnamese situation of mountain zones. On the basis of these findings, it is discussed as to whether the current forest land allocation process may actually promote local development and natural resources conservation, and under what conditions. Deforestation problems must be tackled also with new macroeconomic policies (e.g. credit programmes to support sustainable agriculture practices) and social policy (e.g. reduction of demographic pressure), together with the reform of the State institutions (e.g. State Forest Enterprises) involved in management of the forest areas.     

Accurate sampling of PCDD/F in high temperature flue-gas using cooled sampling probes

In a laboratory-scale combustion reactor, flue-gas samples were collected at two temperatures in the post-combustion zone, 700 °C and 400 °C, using two different water-cooled sampling probes. The probes were the cooled probe described in the European Standard method EN-1948:1, referred to as the original probe, and a modified probe that contained a salt/ice mixture to assist the cooling, referred to as the sub-zero probe. To determine the efficiency of the cooling probes, internal temperature measurements were recorded at 5 cm intervals inside the probes. Flue-gas samples were analyzed for polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs). Samples collected at 700 °C using the original cooling probe showed higher concentrations of PCDD/Fs compared to samples collected using the sub-zero probe. No significant differences were observed between samples collected at 400 °C. The results indicated that artifact formation of PCDD/Fs readily occurs during flue-gas sampling at high temperatures if the cooling within the probe is insufficient, as found for the original probe at 700 °C. It was also shown that this problem could be alleviated by using probes with an enhanced cooling capacity, such as the sub-zero probe.Although this may not affect samples collected for regulatory purposes in exit gases, it is of great importance for research conducted in the high-temperature region of the post-combustion zone.     

Assessment of total concentrations of heavy metals in industrial sludges from the North of Vietnam and their potential impact on the ecosystem

Environmental Science and Pollution Research - Industrial sludges from wastewater treatment plants of industrial parks and a drinking water treatment plant in northern Vietnam were investigated in...     

Ignition and burning rates of segregated waste combustion in packed beds

Recent developments in national recycling and re-use programmes for municipal waste have led to segregation of an increasing proportion of waste to enhance material recovery. Several of the segregated streams contain materials that can not viably be re-used or recycled but can be used for energy recovery. In this study, the combustion of cardboard and waste wood was investigated in a small-scale packed bed reactor in order to provide fundamental data for the design/operation of moving bed furnaces. Key parameters of combustion including the ignition and burning rates were evaluated for various air flowrates and compared to the modelling results. Two successive stages of combustion were identified for both samples: the propagation of ignition front into the bed and combustion of the fuel above the ignition front. The burning rate of cardboard reached a peak of about 300 kg/m(2)h at the air flowrate of 936 kg/m(2)h and decreased at higher air flowrates. For waste wood, both the ignition and burning rates increased in the tested range of the air flowrate up to 702 kg/m(2)h, of which the values were very close to those for the cardboard. The model prediction was in good agreement with the test results for waste wood. However, the burning rate for cardboard was under-predicted due to strongly irregular shapes of the fuel.     

Prenatal diagnosis of chronic granulomatous disease (CGD) in four high risk male fetuses

Prenatal diagnosis of chronic granulomatous disease (CGD) was performed in four male high risk fetuses. The male sex was previously determined by an amniotic cell karyotype. Three kinds of test were performed on fetal blood obtained by umbilical venous puncture under fetoscopy at the 20th gestational week: nitroblue tetrazolium reduction (NBT) cytochemical test with phorbol myristate acetate (PMA) as activator; luminol enhanced chemiluminescence with activation by serum opsonized zymosan (STZ) or PMA; superoxide anion (0) production by measurement of the superoxide dismutase inhibitable reduction of cytochrome c with PMA as activator. Results were compared to those obtained in six fetuses investigated for other inherited diseases. In one case, absence of granulocyte defects was confirmed at birth. In three other cases, the tests showed deficient metabolic oxidative granulocytes. The pregnancy was terminated and the CGD diagnosis was confirmed on the products of abortion. The use of three different techniques performed on whole blood for CGD prenatal diagnosis is recommended instead of a single isolated test to ensure a higher confidence in the diagnosis.     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001