The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.     

Organophosphate triesters in indoor environments

In this study the occurrence of ten organophosphate triesters in indoor air at 29 different locations was investigated. They were detected at all locations and a total of ten compounds were identified. The predominant compounds were the chlorinated compounds tris(chloroisopropyl) phosphate and tris(2-chloroethyl) phosphate with a concentration around 2 microg m(-3) in some indoor environments. A rough estimation gives at hand a daily inhalation of around 10 microg for each of these two compounds.     

Persistence of Human Noroviruses on Food Preparation Surfaces and Human Hands

The human noroviruses (NoV) are the major cause of acute non-bacterial gastroenteritis and are commonly transmitted by foodborne routes. Epidemiological evidence from propagated outbreaks, as well as environmental sampling, suggest that these viruses are environmentally stable. The purpose of this study was to examine the persistence of representative human NoV on the fingertips of volunteers and on commonly used food preparation surfaces. Human fingerpads and surfaces (stainless steel, Formica^®, and ceramic) were inoculated with 20% fecal suspensions of Norwalk virus (NV) or Snow Mountain virus (SMV). The virus inocula were recovered by elution at serial time points ranging from 0 to 120 min post-inoculation (for fingerpads) and after up to 42 days (for surfaces). The quantity of detectable viral RNA, expressed as genome equivalent particles (GEP) was evaluated using quantitative real-time RT-PCR (RT-qPCR). The amount of NV RNA on the surface decreased gradually over time, with an average reduction ranging from 1.5 to 2.9 log₁₀ GEP after 21–28 days storage under ambient conditions. SMV showed greater environmental persistence, with a 0.4–1.2 log₁₀ GEP reduction on all three surfaces after 42 days of ambient storage. On fingerpads, the amount of human NoV RNA declined slightly (<0.25 log₁₀) after 15 min and remained relatively unchanged thereafter (through 120 min). These results support the epidemiological evidence that food preparation surfaces and human hands can act as vehicles for human NoV transmission long after the initial contamination event has occurred.     

Biofilter Treatment of Volatile Organic Compound Emissions from Reformulated Paint: Complex Mixtures,Intermittent Operation,and Startup

Abstract

Two biofilters were operated to treat a waste gas stream intended to simulate off-gases generated during the manufacture of reformulated paint. The model waste gas stream consisted of a five-component solvent mixture containing acetone (450 ppm_v), methyl ethyl ketone (12 ppm_v), toluene (29 ppm_v), ethylbenzene (10 ppm_v), and p-xylene (10 ppm_v). The two biofilters, identical in construction and packed with a polyurethane foam support medium, were inoculated with an enrichment culture derived from compost and then subjected to different loading conditions during the startup phase of operation. One biofilter was subjected to intermittent loading conditions with contaminants supplied only 8 hr/day to simulate loading conditions expected at facilities where manufacturing operations are discontinuous. The other biofilter was subjected to continuous contaminant loading during the initial start period, and then was switched to intermittent loading conditions. Experimental results demonstrate that both startup strategies can ultimately achieve high contaminant removal efficiency (>99%) at a target contaminant mass loading rate of 80.3 g m^?3 hr^?1 and an empty bed residence time of 59 sec. The biofilter subjected to intermittent loading conditions at startup, however, took considerably longer to reach high performance. In both biofilters, ketone components (acetone and methyl ethyl ketone) were more rapidly degraded than aromatic hydrocarbons (toluene, ethylbenzene, and p-xylene). Scanning electron microscopy and plate count data revealed that fungi, as well as bacteria, populated the biofilters.     

The environmental history of Chatthin Wildlife Sanctuary, a protected area in Myanmar (Burma)

We reconstructed the history of Chatthin Wildlife Sanctuary (CWS) to understand how social and economic events, and policy changes affected the sanctuary's condition. We surveyed 25 villages surrounding CWS to evaluate past and present ecological conditions, compare the results with historical accounts and identify causal relationships. During the first half of the 20th century, the primary threat was the government's reduction of old growth forest to supply fuel wood for the British-built railway. The railroad opened the area to colonization, but the villagers' impact on timber and wildlife was low. From 1945 to 1988, villagers became the primary force of landscape degradation. The post-war windfall of firearms increased hunting pressure, and populations of large mammal started to decline. With the economic decline of the 1970s and 1980s, the community's demand for game and forest products intensified, and the large mammal fauna was reduced from eleven to four species. From 1988-2003, the forests surrounding the sanctuary were fragmented and degraded. The absence of large predators rendered the park safe for livestock, and the combined effects of grazing and removal of forest products seriously degraded habitat within CWS. Major threats to CWS during the past two decades have resulted from land use decisions in which government-planned economic enterprises caused encroachment by villagers. Stabilization and recovery of this sanctuary will require management compatible with human needs, including expanded buffer zones, better core area protection, community forestry projects, and probably relocation of villages within the park.     

The return of the giants: ecological effects of an increasing elephant population

Northern Botswana and adjacent areas, have the world's largest population of African elephant (Loxodonta africana). However, a 100 years ago elephants were rare following excessive hunting. Simultaneously, ungulate populations were severely reduced by decease. The ecological effects of the reduction in large herbivores must have been substantial, but are little known. Today, however, ecosystem changes following the increase in elephant numbers cause considerable concern in Botswana. This was the background for the "BONIC" project, investigating the interactions between the increasing elephant population and other ecosystem components and processes. Results confirm that the ecosystem is changing following the increase in elephant and ungulate populations, and, presumably, developing towards a situation resembling that before the reduction of large herbivores. We see no ecological reasons to artificially change elephant numbers. There are, however, economic and social reasons to control elephants, and their range in northern Botswana may have to be artificially restricted.     

Indoor air sampling of organophosphate triesters using solid phase extraction (SPE) adsorbents

In this paper we demonstrate the use of SPE cartridges for sampling of organophosphate triesters in indoor air by adsorptive enrichment. The method has been optimised for the sampling and analysis of organophosphate triesters using a 25 mg aminopropyl silica SPE cartridge. The same cartridge is used for the active air sampling as well as for the subsequent extraction and clean-up of the sample. This makes the method fast and eliminates some tedious and time-consuming manual sample handling steps. Sampling and extraction efficiency was high for the investigated organophosphates, and limit of detection was in the range 0.1-0.3 ng m(-3). The method was applied to measurements of organophosphate triesters in two lecture halls and an electronics dismantling facility, and was compared with results from common filter/adsorbent sampling at each site. Analysis was made by GC with selective detection by NPD set in phosphorus mode, and by GC-MS. Thirteen organophosphate triesters (not counting isomers) were detected in the electronic dismantling facility. Chlorinated organophosphate triesters were detected in all locations with concentrations over 1 microg m(-3) in the lecture halls. This kind of adsorptive enrichment using an SPE cartridge could be adjusted to other types of analytes as well.