A near real-time system for continuously monitoring airborne subtilisin-type enzymes in the industrial atmosphere

We describe the development and validation of a portable system comprising an air sampler coupled to an automated flow injection analysis device. The system is able to monitor airborne concentrations of subtilisin-type enzymes in the workplace atmosphere on a continuous basis. Sampling is in two stages: using a sampling head that is designed to mimic human respiration at approx. 1 m s(-1) at a sampling rate of 600 l min(-1). In the second stage, the captured particles are deposited by impaction from the air stream onto the inner surface of a cyclone that is continuously washed with a jet of buffer solution. Deposited particles are then washed into a reservoir from which samples are taken every 5-6 min and injected automatically into a continuous flow injection analysis system. Proteolytic enzyme in the sample passes through a bioreactor maintained at about 40 degrees C. This contains a cellulose solid phase matrix on which is covalently immobilised Texas Red-labelled gelatin as substrate. The passing enzyme partially digests the substrate releasing fluorophore that is detected down stream in a flow cell coupled to a fluorimeter. The system is calibrated using enzyme standards and the intensity of the resulting peaks from the ex-air samples is converted to airborne concentrations using a mathematical model programmed into a PC. The system has a limit of detection of 4.8 ng m(-3) and a dynamic range of 5-60 ng m(-3). The within assay precision (RSD) is 6.3-9.6% over this range. The within batch precision is 20.3% at 20 ng m(-3) and the corresponding between batch value is 19.5%. The system has been run for periods up to 8 h in the laboratory and for up to 4 h at a factory site and the values obtained compared with time-averaged values obtained from a conventional Galley sampler and in-house analysis when reasonable agreement of the results was observed. The stability of the system over 21 days of continuous use with standards injected periodically was studied. Linearity was observed for all the standard plots throughout. At the end of 21 days, after a total exposure equivalent to 2395 ng ml(-1) of Savinase, the signal due to the 5.0 ng ml(-1) standard was still easily detectable.     

Influence of canola and sunflower diet amendments on cattle feedlot manure

Cattle (Bos taurus) producers can replace a part of the traditional diet of barley (Hordeum vulgare L.) grain/silage with sunflower (Helianthus annus L.) seeds or canola meal (Brassica napus L.)/oil to enhance conjugated linoleic acids (CLA) content in milk and meat for its positive health benefits. The objective of this study is to investigate the effects of feeding sunflower or canola to finishing steers on cattle manure chemical properties and volatile fatty acid (VFA) content. The control diet contained 84% rolled barley and 15% barley silage, which provided only 2.6% lipid. The other six treatments had 6.6 to 8.6% lipid delivered from sources such as hay, sunflower seed (SS), canola meal/oil, and SS forage pellets. Manure samples (a mixture of cattle urine, feces, and woodchip bedding materials) were collected and analyzed after cattle had been on these diets for 113 d. The dietary source and level of lipid had no effect on organic N and nitrate N content in manure, but significantly affected ammonia N and VFA. Inclusion of SS forage pellets, hay, or canola meal/oil in cattle diets had no significant impact on manure characteristics, but SS significantly reduced the pH and increased propionic, isobutyric, and isovaleric content. In addition, N loss after excretion (mainly from urine N) increases with the pH and N levels in both feed and manure. The combination of SS with barley silage resulted in a lower VFA and NH3 content in manure and should be a more attractive option. To better manage N nutrient cycles and reduce NH3 related odor problems, feed and manure pH should be one of the factors to consider when determining feed mix rations.     

Simulated climate adaptation in stormwater systems: evaluating the efficiency of adaptation strategies

Adaptations in infrastructure may be necessitated by changes in temperature and precipitation patterns to avoid losses and maintain expected levels of service. A roster of adaptation strategies has emerged in the climate change literature, especially with regard to timing: anticipatory, concurrent, or reactive. Significant progress has been made in studying climate change adaptation decision making that incorporates uncertainty, but less work has examined how strategies interact with existing infrastructure characteristics to influence adaptability. We use a virtual testbed of highway drainage crossings configured with a selection of actual culvert emplacements in Colorado, USA, to examine the effect of adaptation strategy and culvert characteristics on cost efficiency and service level under varying rates of climate change. A meta-model approach with multinomial regression is used to compare the value of better climate change predictions with better knowledge of existing crossing characteristics. We find that, for a distributed system of infrastructural units like culverts, knowing more about existing characteristics can improve the efficacy of adaptation strategies more than better projections of climate change. Transportation departments choosing climate adaptation strategies often lack detailed data on culverts, and gathering that data could improve the efficiency of adaptation despite climate uncertainty.     

Visualizing dynamic capabilities as adaptive capacity for municipal water governance

This study seeks to expand empirical research on how municipalities have adapted and innovated (or not) their water systems as a result of climate change. We analyze characteristics of water governance at the municipal scale in Oklahoma, USA. ArcMap 10.3 was used to build a qualitative geographic information system (GIS) based on fieldwork, including interviews and site-observations, to compare dynamic capabilities that lead to innovation in 38 cities in the state. The GIS enables visualization of our digitalized research to understand the interconnections between drivers of innovativeness—the combination of dynamic capabilities and innovation rates—and state of water resource infrastructure in place specific and regional planning contexts. In particular, the GIS takes into consideration income level, the influence of state-level water policy (Water for 2060 Act), water manager certification levels, population, dynamic capabilities, and perceptions of risk and vulnerability to water system change. Digitizing this information provides a diverging perspective on the historical lack of innovation in the public sector, as different socio-cultural, socio-economic, and socio-political contexts occur throughout Oklahoma, a state notorious for its oil centered economy and its climate change deniers. The findings suggest that innovativeness is directly related to dynamic capabilities and indirectly related to population size, income level, and the educational backgrounds of water decision-makers. The visualizations also show that some cities have surplus capacity for adaptation, while others were able to more efficiently turn capacity into water management innovations. Seeing representations of water governance success and failure in communities affords the opportunity to educate citizens and decision-makers to adapt water infrastructures to the effects of climate change, showcasing the utility of digitalization in a quest for sustainable solutions.     

The Superfund Remedial Action Decision Process: A Review of Fifty Records of Decision

Abstract

Although the Superfund remedial action decision process is a complex process involving a variety of technical, political, and public health issues, the primary goal of remedial action is the protection of public health. We performed an in-depth analysis of 50 post-SARA Records of Decision in order to characterize the role of risk assessment in the decision-making process and determine whether decisions are being made in an effective and environmentally protective manner. Our findings indicate that the majority of decisions to remediate Superfund sites are based on the existence of contamination per se and not on actual public health risk. Although hypothetical risk is an essential consideration, this gray area is not well-defined in the current decision-making process.

The lack of assessment of the degree of risk reduction associated with the remedial alternatives evaluated and the lack of support indicating the effectiveness of the remedial alternatives selected also constitute major weaknesses in the majority of decisions. These inadequacies undermine rationales regarding the protectiveness and cost-effectiveness of the remedial alternatives selected. The fact that objectives beyond addressing public health risk are often unclear in the decision-making process also weakens rationales for costeffectiveness.     

Using Twitter to communicate conservation science from a professional conference

Scientists are increasingly using Twitter as a tool for communicating science. Twitter can promote scholarly discussion, disseminate research rapidly, and extend and diversify the scope of audiences reached. However, scientists also caution that if Twitter does not accurately convey science due to the inherent brevity of this media, misinformation could cascade quickly through social media. Data on whether Twitter effectively communicates conservation science and the types of user groups receiving these tweets are lacking. To address these knowledge gaps, we examined live tweeting as a means of communicating conservation science at the 2013 International Congress for Conservation Biology (ICCB). We quantified and compared the user groups sending and reading live tweets. We also surveyed presenters to determine their intended audiences, which we compared with the actual audiences reached through live tweeting. We also asked presenters how effectively tweets conveyed their research findings. Twitter reached 14 more professional audience categories relative to those attending and live tweeting at ICCB. However, the groups often reached through live tweeting were not the presenters’ intended audiences. Policy makers and government and non‐governmental organizations were rarely reached (0%, 4%, and 6% of audience, respectively), despite the intent of the presenters. Plenary talks were tweeted about 6.9 times more than all other oral or poster presentations combined. Over half the presenters believed the tweets about their talks were effective. Ineffective tweets were perceived as vague or missing the presenters’ main message. We recommend that presenters who want their science to be communicated accurately and broadly through Twitter should provide Twitter‐friendly summaries that incorporate relevant hashtags and usernames. Our results suggest that Twitter can be used to effectively communicate speakers’ findings to diverse audiences beyond conference walls.     

Using Multimedia Modeling to Expedite Site Characterization

GOAL, SCOPE AND BACKGROUND: This paper uses two case studies of U.S. Department of Energy nuclear weapons complex installations to illustrate the integration of expedited site characterization (ESC) and multimedia modeling in the remedial action decision making process. CONCEPTUAL SITE MODELS, MULTIMEDIA MODELS, AND EXPEDITED SITE CHARACTERIZATION: Conceptual site models outline assumptions about contaminates and the spatial/temporal distribution of potential receptors. Multimedia models simulate contaminant transport and fate through multiple environmental media, estimate potential human exposure via specific exposure pathways, and estimate the risk of cancer and non-cancer health outcomes. ESC relies on using monitoring data to quantify the key components of an initial conceptual site model that is modified iteratively using the multimedia model. CASE STUDIES: Two case studies are presented that used the ESC approach: Los Alamos National Laboratory (LANL) and Pantex. LANL released radionuclides, metals, and organic compounds, into canyons surrounding the facility. The Pantex Plant has past waste management operations which included burning chemical wastes in unlined pits, burying wastes in unlined landfills, and discharging plant wastewaters into on-site surface waters. CONCLUSIONS: The case studies indicate that using multimedia models with the ESC approach can inform assessors about what, where, and how much site characterization data needs to be collected to reduce the uncertainty associated with risk assessment. Lowering the degree of uncertainty reduces the time and cost associated with assessing potential risk and increases the confidence that decision makers have in the assessments performed.     

Considerations for the design of organic mulch permeable reactive barriers

Organic mulch consists of insoluble carbon biopolymers that are enzymatically hydrolyzed during decomposition to release aqueous total organic carbon (TOC). The released TOC is utilized by microorganisms as an electron donor to transform electrophilic contaminants via reductive pathways. Over the last decade, organic mulch permeable reactive barriers (PRBs), or biowalls, have received increased interest as a relatively inexpensive slow‐release electron donor technology for addressing contaminated groundwater. To date, biowalls have been installed to enhance the passive bioremediation of groundwater contaminated with a variety of electrophilic compounds, including chlorinated solvents, explosives, and perchlorate. In addition, several mulch biowall projects are currently under way at several U.S. Department of Defense facilities. However, at the present time, the guidelines available for the design of mulch PRBs are limited to a few case studies published in the technical literature. A biowall design, construction, and operation protocol document is expected to be issued by the Air Force Center for Environmental Excellence in 2007. In this publication, three technical considerations that can have a significant impact on the design and performance of mulch PRBs are presented and discussed. These technical considerations are: (1) hydraulic characteristics of the mulch bed; (2) biochemical characteristics of different types of organic amendments used as mulch PRB fill materials; and (3) a transport model that can be used to estimate the required PRB thickness to attain cleanup standards. © 2007 Wiley Periodicals, Inc.     

Ecological impacts of the N-viro biosolids land-application for wild blueberry (Vaccinium angustifolium. Ait) production in Nova Scotia

Land application of biosolids from processed sewage sludge may deteriorate soil, water, and plants. We investigated the impact of the N-Viro biosolids land-application on the quality of the soil water that moved through Orthic Humo-Ferric Podzols soil of Nova Scotia (NS) at the Wild Blueberry Research Institute, Debert, NS Canada. In addition, the response of major soilproperties and crop yield was also studied. Wild blueberry (Vaccinium angustifolium. Ait) was grown under irrigated and rainfed conditions in 2008 and 2009. Four experimental treatments including (i) NI: N-Viro irrigated, (ii) NR: N-Viro rainfed, (iii) FI: inorganic fertilizer irrigated, and (iv) FR: inorganic fertilizer rainfed (control) were replicated 4 times under randomized complete block design. Soil samples were collected at the end of each year and analyzed for changes in cation exchange capacity (CEC), soil organic matter (SOM), and pH.Soil water samples were collected four times during the study period from the suction cup lysimeters installed within and below crop root zone at 20 and 40 cm depths, respectively. The samples were analyzed for a range of water quality parameters including conductance, hardness, pH, macro- and micronutrients, and the infectious pathogens Escherichia coli (E. coli) and salmonella. Berries were harvested for fruit yield estimates. Irrigation significantly increased CEC during 2008 and the soil pH decreased from 4.93 (2008) to 4.79 (2009). There were significant influences of irrigation, fertilizer, and their interaction, in some cases, on most of the soil water quality parameters except on the infectious bacteria. No presence of E. coli or salmonella were observed in soil and water samples, reflecting the absence of these bacteria in biosolids used in this experiment. Nutrient concentration in the soil water samples collected from the four treatments were higher in the sequence NI > NR > FI > FR. The irrigation treatment had significant effect on the unripe fruit yield. We conclude that the comparable performance of N-Viro biosolids and the increasing prices of inorganic fertilizers would compel farmers to use economically available N-Viro biosolids that, coupled with the supplemental irrigation, did not deteriorate the studied soil properties, soil water quality, and the wild blueberry yield during this experiment.     

A Framework for Understanding and Improving Environmental Decision Making

This paper presents a framework for understanding and improving public sector environmental decision making. Within the framework, four interrelated components are discussed: (1) the environmental and cultural context-understanding this context includes understanding what people consider to be environmental problems, the goals and values that they bring to environmental problems and decision processes, specialized and common knowledge about environmental problems, and the institutional settings within which problems are addressed; (2) planning and appraisal activitiesthese activities include forecasting and monitoring exercises, evaluations of past decisions, and decisions that processes ought to be launched to solve specific environmental problems; (3) decision-making modes-these include six typical ways of conducting an environmental problem-solving process, modes which, in the framework, are called emergency action, routine procedures, analysis-centred, elite corps, conflict management and collaborative learning; (4) decision actions-these include five generic steps that are undertaken, formally or intuitively, in virtually any decision-making situation: issue familiarization; criteria setting; option construction; option assessment; and reaching a decision. In the course of describing the framework, we show a decision-making process can be adapted to incorporate sustainability concerns, including fostering sustainable environmental and social systems, meeting obligations to future generations, and searching for robust and reasonable (rather than rigidly optimal) decisions. The framework also helps to illuminate intriguing questions regarding institutional responsibility, decision process complexity and paradigms for environmental decision making.