Characterisation of PM10 emissions from woodstove combustion of common woods grown in Portugal

A series of source tests was performed to evaluate the chemical composition of particle emissions from the woodstove combustion of four prevalent Portuguese species of woods: Pinus pinaster (maritime pine), Eucalyptus globulus (eucalyptus), Quercus suber (cork oak) and Acacia longifolia (golden wattle). Analyses included water-soluble ions, metals, radionuclides, organic and elemental carbon (OC and EC), humic-like substances (HULIS), cellulose and approximately l80 organic compounds. Particle (PM₁₀) emission factors from eucalyptus and oak were higher than those from pine and acacia. The carbonaceous matter represented 44–63% of the particulate mass emitted during the combustion process, regardless of species burned. The major organic components of smoke particles, for all the wood species studied, with the exception of the golden wattle (0.07–1.9% w/w), were anhydrosugars (0.2–17% w/w). Conflicting with what was expected, only small amounts of cellulose were found in wood smoke. As for HULIS, average particle mass concentrations ranged from 1.5% to 3.0%. The golden wattle wood smoke presented much higher concentrations of ions and metal species than the emissions from the other wood types. The results of the analysis of radionuclides revealed that the ²²⁶Ra was the naturally occurring radionuclide more enriched in PM₁₀. The chromatographically resolved organics included n-alkanes, n-alkenes, PAH, oxygenated PAH, n-alkanals, ketones, n-alkanols, terpenoids, triterpenoids, phenolic compounds, phytosterols, alcohols, n-alkanoic acids, n-di-acids, unsaturated acids and alkyl ester acids.     

Wood burning impact on PM10 in three Austrian regions

Anhydrosugars (levoglucosan, mannosan and galactosan) were investigated during one year in three Austrian regions at three types of sites (city-heavy traffic-impacted, city-residential and background) in order to assess the magnitude of the contribution of wood smoke to the particulate matter load and its organic fraction. The annually averaged concentrations of levoglucosan ranged from 0.12 to 0.48 μg m^?3. The levoglucosan concentration exhibited a strong annual cycle with higher concentrations in the cold season. The minor anhydrosugars had a similar annual trend, but their concentrations were lower by a factor of about 5 and about 25 in the cold season for mannosan and galactosan, respectively. Levoglucosan concentrations were higher at the inner-urban as compared to rural sites. The contribution of wood smoke to organic carbon and PM₁₀ levels was calculated using a constant ratio of levoglucosan and OC, respectively PM₁₀ as derived for fire wood typical for Alpine European regions [Schmidl, C., Marr, I.L., Caseiro, A.e, Kotianová, P., Berner, A., Bauer, H., Kasper-Giebl, A., Puxbaum, H., 2008a. Chemical characterisation of fine particle emissions from wood stove combustion of common woods growing in mid-European Alpine regions. Atmospheric Environment 42, 126–141]. The estimated contribution of wood smoke-OC to the OC of PM₁₀ ranged from one third to more than half in the cold season with higher contributions up to 70% in winter (December, January and February) in the smaller cities and the rural background. This indicates, that wood smoke is the predominant source of organic material at rural and small urban sites in central Europe. Consistently, wood smoke was an important contributor to PM₁₀ during the cold season, with contributions of around 10% in the Vienna larger region and around 20% at rural sites in the densely forested regions of Salzburg and Styria during the winter months. In those regions residential sites exhibited highest relative wood smoke contents in PM₁₀ during autumn (September till November), indicating the use of wood stoves for auxiliary heating in the transition of warm to cold season. Using the relationships between the different anhydrosugars the combustion of softwood was found to be dominant for the wood smoke occurrence in ambient air at the investigated sites. Potassium, a commonly used tracer for biomass burning, correlated well to levoglucosan, with a mass ratio of around 0.80 in the cold season.     

Evaluation of aerosol sources at European high altitude background sites with trajectory statistical methods

This study has investigated the influence of synoptic weather patterns and long-range transport episodes on the concentrations of several compounds related to different aerosol sources (EC, OC, SO₄^2?, Ca²⁺, Na⁺, K⁺, ²¹⁰Pb, levoglucosan and dicarboxylic acids) registered in PM10 or PM2.5 aerosol samples collected at three remote background sites in central Europe. Air mass back-trajectories arriving at these sites have been analysed by statistical methods. Firstly, air mass back-trajectories have been grouped into clusters. Each cluster corresponds to specific meteorological scenarios, which were extracted and discussed. Finally, redistributed concentration fields have been computed to identify the main potential source regions of the different key aerosol components. A marked seasonal pattern is observed in the occurrence of the different clusters, with fast westerly and northerly Atlantic flows during winter and weak circulation flows in summer. Spring and fall were characterised by advection of moderate flows from northeastern and eastern Europe. Significant inter-cluster differences were observed for concentrations of receptor aerosol components, with the highest concentrations of EC, OC, SO₄^2?, K⁺ and ²¹⁰Pb associated with local and mesoscale aerosol sources located over central Europe related to enhanced photochemical processes. Emissions produced by fossil fuel and biomass burning processes from the Baltic countries, Byelorussia, western regions of Russia and Kazakhstan in spring and fall also contribute to elevated levels of EC, OC, SO₄^2?, K⁺ and ²¹⁰Pb. In the summer period long-range transport episodes of mineral dust from North-African deserts were also frequently detected, which caused elevated concentrations of coarse Ca²⁺ at sites. The baseline aerosol concentrations in central Europe at the high altitude background sites were registered in winter, with the exception of coarse Na⁺. While the relatively high concentrations of Na⁺ can be explained by sea salt advected from the Atlantic, the low levels of other aerosol components are caused by efficient aerosol scavenging associated to advections of Atlantic air masses, as well as lower emissions of these species over the Atlantic compared to those over the European continent and very limited vertical air mass exchange over the continent.     

Sustainability in manufacturing processes: practices performed in metal forming,casting, heat treatment,welding and electrostatic painting

ABSTRACT

This article aims to list the main sustainable practices developed in the processes of metal forming, casting, heat treatment, welding and electrostatic painting. When analysed the literature about sustainable manufacturing, a predominance of studies about machining is observed and the processes mentioned are few explored in academic studies. The research strategy used to reach the objective was systematic literature review, conducted for each process cited. Many sustainable practices were identified with prominence of better materials use and energy efficiency. The authors of this article believe that the information presented here can be useful for researches in their future studies and for industry professionals interested in improving manufacturing processes.     

Smoke emissions from biomass burning in a Mediterranean shrubland

Gaseous and particulate samples from the smoke from prescribed burnings of a shrub-dominated forest with some pine trees in Lousã Mountain, Portugal, in May 2008, have been collected. From the gas phase Fourier transform infrared (FTIR) measurements, an average modified combustion efficiency of 0.99 was obtained, suggesting a very strong predominance of flaming combustion. Gaseous compounds whose emissions are promoted in fresh plumes and during the flaming burning phase, such as CO₂, acetylene and propene, produced emission factors higher than those proposed for savannah and tropical forest fires. Emission factors of species that are favoured by the smouldering phase (e.g. CO and CH₄) were below the values reported in the literature for biomass burning in other ecosystems. The chemical composition of fine (PM_2.5) and coarse (PM_2.5–10) particles was achieved using ion chromatography (water-soluble ions), instrumental neutron activation analysis (trace elements) and a thermal–optical transmission technique (organic carbon and elemental carbon). Approximately 50% of the particulate mass was carbonaceous in nature with a clear dominance of organic carbon. The organic carbon-to-elemental carbon ratios up to 300, or even higher, measured in the present study largely exceeded those reported for fires in savannah and tropical forests. More than 30 trace elements and ions have been determined in smoke aerosols, representing in total an average contribution of about 7% to the PM₁₀ mass.     

Apparatus for Simultaneous Size-Differentiated Sampling of Optical and Suboptical Aerosols: Application to Analysis of Nitrates and Sulfates

In recent years, the EPA has moved toward a risk assessment/risk reduction framework for making regulatory decisions. The Agency has taken a number of steps to assure the quality and consistency of the risk assessment component of those decisions. The first, and perhaps most important of these steps, is the development of Agency-wide risk assessment guidelines. Five guidelines have been published. They are: carcinogenicity, mutagenicity, developmental toxicity, chemical mixtures, and exposure. The provisions of the five guidelines are discussed in the context of the four components of risk assessment. Other activities designed to assure quality and consistency in risk assessments, reduce uncertainty in risk assessment, ensure a more efficient information exchange about risk and risk assessment, and develop the appropriate oversight mechanisms are also discussed. These include additional guidelines, the Risk Assessment Forum, risk assessment research, the Integrated Risk Information System, the Hazard Assessment Notification System, and the Risk Assessment Council.     

Short-term effect of fine particulate matter (PM<Subscript>2.5</Subscript>) and ozone on daily mortality in Lisbon,Portugal

Introduction  

Urban ambient air pollution exposures continue to be a global public health concern. Although air quality targets are often exceeded in Lisbon, the largest city in Portugal, there is currently no study that has assessed the quantitative impact of these pollutants on daily mortality.     

Using the WTO/TBT enquiry point to monitor tendencies in the regulation of environment, health, and safety issues affecting the chemical industry

The growing importance of technical regulation affecting the use and sale of chemical products is a topic of interest not only for the chemical industry, but also for governments, nongovernmental organizations, consumers, and interested communities. The results of such regulation on behalf of the environment, health and safety of individuals, as well as its economic effects on industrial activity, are well understood in the United States and recently in the European Union. In less developed countries, however, the general level of public understanding of these issues is still minimal. It is common knowledge that the so-called "regulatory asymmetry" between countries at different levels of development contributes to the establishment of technical barriers to trade. Such asymmetries, however, also have other impacts: the displacement of polluting industrial sectors to countries which have less demanding regulations, the concentration of unsafe and harmful environmental conditions in certain parts of the globe, and the competitive disadvantage for industries located in countries where control is more rigid. This study analyses information on a wide range of technical regulations issued by World Trade Organization (WTO) members, and focuses on those regulations that affect the chemical industry. This information is available through the WTO Enquiry Points, organizations created in each country to administrate the Technical Barriers to Trade Agreement (TBT). This article consists of an analysis of 4,301 notifications of technical regulations by WTO member states in the 7-year period following the establishment of the WTO in 1995. Starting from this mass of information, 585 notifications that affect the circulation or use of chemical products were isolated. Of this group, 71% refer to only 15 countries. This group of notifications was further classified according to their motivation (the environment, health, safety), by the type of product affected (medications, fuels, hazardous products, etc.), by the type of country where it was established (developed, emerging or developing) and the existing conformity assessment mechanism (prohibition, licenses, certification, labeling, etc.). Beyond identifying tendencies in specific industrial sectors, the notifications studied here reach more than 100 chemical products, substances, preparations and other materials, which are subject to various levels of restrictions in different parts of the globe because of their composition or adverse reactions during their life cycles.     

Toxic effect of metal cation binary mixtures to the seaweed Gracilaria domingensis (Gracilariales,Rhodophyta)

The macroalga Gracilaria domingensis is an important resource for the food, pharmaceutical, cosmetic, and biotechnology industries. G. domingensis is at a part of the food web foundation, providing nutrients and microelements to upper levels. As seaweed storage metals in the vacuoles, they are considered the main vectors to magnify these toxic elements. This work describes the evaluation of the toxicity of binary mixtures of available metal cations based on the growth rates of G. domingensis over a 48-h exposure. The interactive effects of each binary mixture were determined using a toxic unit (TU) concept that was the sum of the relative contribution of each toxicant and calculated using the ratio between the toxicant concentration and its endpoint. Mixtures of Cd(II)/Cu(II) and Zn(II)/Ca(II) demonstrated to be additive; Cu(II)/Zn(II), Cu(II)/Mg(II), Cu(II)/Ca(II), Zn(II)/Mg(II), and Ca(II)/Mg(II) mixtures were synergistic, and all interactions studied with Cd(II) were antagonistic. Hypotheses that explain the toxicity of binary mixtures at the molecular level are also suggested. These results represent the first effort to characterize the combined effect of available metal cations, based on the TU concept on seaweed in a total controlled medium. The results presented here are invaluable to the understanding of seaweed metal cation toxicity in the marine environment, the mechanism of toxicity action and how the tolerance of the organism.