Novel Tough Crystalline Blends of Polylactide with Ethylene Glycol Derivative of POSS

Blending of polylactide (PLA) with low stereoregularity and polyhedral oligomeric silsesquioxane grafted with arms of poly(ethylene glycol) methyl ether, acting as a plasticizer, allowed us previously to obtain a novel stable elastomeric-like material. The present contribution focuses on the properties of semi-crystalline PLA plasticized with this compound. Melt blends of PLA with 5–15 wt% of the plasticizer, were compression molded, quenched and annealed, which enabled cold-crystallization. The glass transition temperature of the blends and their drawability depended on their crystallinity and plasticizer content. The best ductility was reached at the plasticizer content of 15 wt%; the achieved strain at break was 6.5 (650%) and 1.3 (130%), for the quenched and annealed material, respectively. The latter value exceeded 20 times the strain at break of neat crystalline PLA. The tensile toughness of the annealed 15 wt% blend was 12 times larger than that of crystalline PLA. Moreover, annealing of 15 wt% blend improved its yield strength by 40%. Despite the two peaks of the loss modulus, indicating the two glass transitions in this blend, no heterogeneities were found by scanning electron microscopy, indicating that the plasticizer enriched phase formed instead of distinct inclusions of the plasticizer.     

Effective bioremoval of Fe(III) ions using paprika (Capsicum annuum L.) pomace generated in the food industry

In these studies, removal of Fe(III) ions by biosorption processes from aqueous solutions was carried out using paprika (Capsicum annuum L.) pomace generated during processing in the food industry. The biosorbent material was characterized using several analytical methods, including particle size distribution, XRD, SEM–EDS, electrokinetic zeta potential, surface area analysis (BET, BJH), thermogravimetry, morphology (SEM), spectrophotometry FT-IR. Several factors, such as biosorbent dosage, initial concentration, contact time and initial pH were analyzed to show an effect on the bioremoval process, efficiency and adsorption capacity. As a result, the maximum adsorption efficiency and capacity were determined to be 99.1% and 7.92 mg/g, respectively. Based on the kinetics analysis, the bioremoval process is better described by the Langmuir isotherm model and the pseudo-second order equation model. In conclusion, the achieved research results suggest that paprika biomass can be an effective material for efficiently removing iron(III) from wastewater and improving water quality. These studies on the recovery of iron metal from the environment fit in the latest trends in the concept of the global circular economy.

     

Polyurethanes Based on Atactic Poly[(R,S)-3-hydroxybutyrate]: Preliminary Degradation Studies in Simulated Body Fluids

The aliphatic polyurethanes based on atactic poly[(R,S)-3-hydroxybutyrate] (a-PHB) and commercial oligomerols: poly(ε-caprolactone)diol and polyoxytetramethylenediol were investigated. a-PHB was obtained by anionic ring-opening polymerization of (R,S)-β-butyrolactone. The 4,4′-methylenedicyclohexyl diisocyanate and 1,4-butanediol were used as contributors of hard segments. The aim of the study was to determine the influence of synthetic, atactic a-PHB in soft segments of polyurethanes on their degradability in simulated body fluids (SBF) and Ringer solution. The incubation of polymer samples in both degradative solutions was carried out for 36 weeks. It was concluded that the presence of a-PHB in polyurethane structure accelerated their degradation in SBF and in Ringer solution and, protected the calcification process.     

Assessment of soils contamination with veterinary antibiotic residues in Northern Poland using developed MAE-SPE-LC/MS/MS methods

Among the wide range of compounds reaching the soil are the veterinary antimicrobials. Since no regulations regarding acceptable levels of drug concentrations in the environment exist, monitoring tests, particularly concerning soils, are carried out very rarely. This study presents a preliminary assessment of the contamination of agricultural soils in Northern Poland with seven antimicrobial veterinary medicines which has never been carried out before. Veterinary drugs were detected in 54% of the examined soil samples; the most commonly detected drugs were sulfonamides and trimethoprim. The highest indicated concentrations refer to enrofloxacin (57.0 μg kg^?1) and trimethoprim (47.8 μg kg^?1). The presence of these target drugs in the soil environment confirms the need for further monitoring studies. The analytical methods developed in this study are an excellent tool to achieve this goal and allow an estimation of the risk connected with the presence of veterinary antimicrobials in soils.

     

Determination of bismuth in environmental samples by slurry sampling graphite furnace atomic absorption spectrometry using combined chemical modifiers

Persistence behavior of insecticides chlorpyriphos, profenofos, triazophos, cypermethrin, and deltamethrin following the use of three combination formulations Action 505 (chlorpyriphos?+?cypermethrin), Roket 44EC (profenofos?+?cypermethrin), and Anaconda Plus (triazophos?+?deltamethrin) was studied in cabbage following the spray application at the recommended and double doses. Bio-efficacy of these formulations was also evaluated against mustard aphids (Lipaphis erysimi Kaltenbach) and diamondback moth (Plutella xylostella L.). The residues of different insecticides persisted for 5–8 days at low dose and 8–12 days at high dose. The residues dissipated with time and 87–100 % dissipation was recorded on the 8th day. The half-life values varied from 0.4 to 1.6 days. Based on the acceptable daily intake (ADI) values, a safe waiting period of 1 day has been suggested for the formulations Action 505 and Roket 44EC and 3 days for Anaconda Plus at the recommended dose of application. Action (1.6 L/ha) treatment was found to be the best as it significantly reduced the diamondback moth (DBM) (~60 %) and aphid population (~70 %) besides giving the highest yield (170 % increase over control).     

Shifting elasmobranch community assemblage at Cocos Island—an isolated marine protected area

Fishing pressure has increased the extinction risk of many elasmobranch (shark and ray) species. Although many countries have established no‐take marine reserves, a paucity of monitoring data means it is still unclear if reserves are effectively protecting these species. We examined data collected by a small group of divers over the past 21 years at one of the world's oldest marine protected areas (MPAs), Cocos Island National Park, Costa Rica. We used mixed effects models to determine trends in relative abundance, or probability of occurrence, of 12 monitored elasmobranch species while accounting for variation among observers and from abiotic factors. Eight of 12 species declined significantly over the past 2 decades. We documented decreases in relative abundance for 6 species, including the iconic scalloped hammerhead shark (Sphyrna lewini) (?45%), whitetip reef shark (Triaenodon obesus) (?77%), mobula ray (Mobula spp.) (?78%), and manta ray (Manta birostris) (?89%), and decreases in the probability of occurrence for 2 other species. Several of these species have small home ranges and should be better protected by an MPA, which underscores the notion that declines of marine megafauna will continue unabated in MPAs unless there is adequate enforcement effort to control fishing. In addition, probability of occurrence at Cocos Island of tiger (Galeocerdo cuvier), Galapagos (Carcharhinus galapagensis), blacktip (Carcharhinus limbatus), and whale (Rhincodon typus) sharks increased significantly. The effectiveness of MPAs cannot be evaluated by examining single species because population responses can vary depending on life history traits and vulnerability to fishing pressure.     

Man-Made and Natural Fibres as a Reinforcement in Fully Biodegradable Polymer Composites: A Concise Study

Biodegradable and ecologically friendly polymer materials attract great attention of many scientific groups in the world as they fit well in the sustainable development policy and are considered to be “a right thing to do” by the general public. Such polymers can be modified by the addition of different fillers, favorably of natural origin. In the paper we provide a comparison between composites based on two biodegradable polymers: poly(lactic acid)—biodegradable, natural stock polymer and poly(butylene succinate)—biodegradable polymer produced from fossil based materials. For each polymer we have prepared a series of composites with different fibres (natural: hemp and flax, and manmade: Cordenka) and different filler loadings. To fully characterize obtained materials thermal, mechanical and surface free energy measurements were performed, completed with morphology observations and an attempt to compare the experimental data for tensile measurements with values obtained using the modified rule of mixtures. The tensile results calculated using the modified rule of mixture for below 30% fibre loading are found to be fitting the experimental data. Composites mechanical properties and morphology were strongly affected by the type of fibre used and its loading, however thermal properties remained almost unchanged. In specific, Cordenka fibres tend to form bunches which presence greatly influences the mechanical properties but still our studies have shown clear advantage of manmade Cordenka fibres over the hemp and flax fibres when considering distribution and fibre–polymer interaction.