Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

The Formation of Mg3Ca(S04)4 during the Sulfation Reaction of Dolomite

Abstract

Inspection and maintenance programs for motor vehicles in the United States increasingly use loaded mode mass emissions testing (IM240). A method was developed to predict mass emission rates and mass emission changes, particularly from repair benefits, using a low-cost, portable four-gas non-dispersive infrared (NDIR) vehicle exhaust gas analyzer. A single vehicle was tested several times with the analyzer while on the dynamometer and undergoing successive repairs. Excellent correlations for CO and HC were observed. Five vehicles were measured using an on-road driving loop before and after emissions-related repairs, while another three vehicles were tested with no repairs performed. The on-road concentration data used to guide the repair process were converted to grams per gallon; when divided by estimated miles per gallon, this gave grams per mile emissions for comparison to IM240. Correlation coefficients (r²) of 0.87 for CO and 0.76 for HC were achieved for the 13 tests. The linear correlations between IM240 and emissions measured by this method would allow repair facilities to perform a relatively inexpensive test for diagnostic purposes and to estimate repair effectiveness without the need for a dynamometer.     

An Overview of EPA’s Quality Assurance Program

Quality Assurance has been defined in many different ways to express concern for the “quality” of the output of some operation or function. For the purpose of this presentation, quality assurance is defined as the sum of those activities within an environmental monitoring or measurement program which are primarily for the purpose of documenting the precision, accuracy, representativeness, and completeness of the data that are produced. Further, we view quality assurance as a management tool which encompasses both administrative and technical functions which generally fall into three categories: (1) Prevention which includes those activities carried out prior to the proper placement and operation of the measurement system; (2) Evaluation which includes the continuous overview and checks on the performance of the systems and operators; and (3) Correction which includes changes made to improve or stabilize the capability and performance of the system.     

Demonstrations of coal-fired oxy-fuel technology for carbon capture and storage and issues with commercial deployment

As one of the three major carbon capture technologies associated with carbon capture and storage (CCS), oxy-fuel technology is currently undergoing rapid development with a number of international demonstration projects of scale 10–30 MW_e having commenced and units with a scale of 250–300 MW_e emerging in the progression towards commercialisation. Industrial scale testing of coal combustion and burners is also being conducted by technology vendors.The paper details the current international status of the technology; the contributions of current demonstrations; and a roadmap for commercial deployment.At its current state of maturity oxy-fuel technology may be considered semi-commercial, in that even if a unit was economically viable and could be provided by a vendor, the generator and vendor would need to share the technical risk. This is because guarantees could not at present be provided for operating characteristics associated with mature technologies such as reliability, emissions, ramp rate and spray control. This is due to the maturity of the technology associated with the capability of vendors and associated design and operational uncertainties, associated with a lack of plant experience at scale.The projected development of oxy-fuel technology for first-generation plant is provided, using an ASU for oxygen supply, standard furnace designs with externally recirculated flue gas, and limited thermal integration of the ASU and compression plant with the power plant. Potential features of second generation technology are listed.Listed issues delaying deployment indicate that market, economic, legal and issues of public acceptance are more significant than technical barriers.     

Towards a contraction and convergence target based on population life expectancies since 1960

This paper explores a finding that emerged in the early phases of a multidisciplinary project applying population health and psychology to issues of social progress and sustainability. Across 180 countries and half a century of data, the levels of carbon emissions per capita that maximise life expectancy fall within a tight band averaging only 6.6 tonnes—considerably less than wealthier countries emit per person. Various tests fail to break down the curves and, although the authors remain cautious, the stability since 1960 offers implications for the carbon budget leading up to 2050. This is the first time these curves have been contextualised against established climate science, with timely implications for international negotiations on sustainability and development.     

Field studies of ethoprop movement and degradation in two Florida soils

Unsaturated- and saturated-zone field studies were conducted under two different agricultural conditions in Florida, U.S.A., to measure the movement and degradation of ethoprop.When ethoprop was applied to a sand soil in an orange grove located on the Florida central ridge, soil residues declined with a half-life of 13 days to near the limit of detection (0.01 μg g⁻¹ within 2 months. Ethoprop residues were generally contained in the upper 2 m of soil. Although low levels of ethoprop were found in four groundwater samples within the first 3 months after application, the cause of these isolated and transient residues could not be determined. The data show that there was no widespread plume of ethoprop residues beneath or downgradient from the treated area.On a flatwood soil on the west coast of Florida, ethoprop was incorporated into raised beds and protected by a plastic mulch in which tomatoes were grown. When the plastic mulch was present, ethoprop soil residues declined with a half-life of 40 days and were confined to the upper 0.3 m of soil. After the mulch was removed at crop harvest, the remaining ethoprop dissipated with a half-life of 12 days. Groundwater residues in excess of 1 μg L⁻¹ were confined to a single sample collected after the well had been damaged during a rototilling operation. Resides of < 1 μg L⁻¹ were present in three later samples from this well. At the sampling interval where the highest residues were detected in the damaged well, ethoprop residues of < 1 μg L⁻¹ were also found in three other wells but no residues were detected in these wells in later samples.