Research progress and hot spots of hydrothermal liquefaction for bio-oil production based on bibliometric analysis

Environmental Science and Pollution Research - Hydrothermal liquefaction (HTL) of biomass used HTL reaction under high temperature and pressure to produce bio-oil. This technology is considered as...     

Magnetotactic bacteria: Characteristics and environmental applications

• Magnetotactic bacteria (MTB) synthesize magnetic nanoparticle within magnetosomes. • The morphologic and phylogenetic diversity of MTB were summarized. • Isolation and mass cultivation of MTB deserve extensive research for applications. • MTB can remove heavy metals, radionuclides, and organic pollutants from wastewater. Magnetotactic bacteria (MTB) are a group of Gram-negative prokaryotes that respond to the geomagnetic field. This unique property is attributed to the intracellular magnetosomes, which contains membrane-bound nanocrystals of magnetic iron minerals. This review summarizes the most recent advances in MTB, magnetosomes, and their potential applications especially the environmental pollutant control or remediation. The morphologic and phylogenetic diversity of MTB were first introduced, followed by a critical review of isolation and cultivation methods. Past research has devoted to optimize the factors, such as oxygen, carbon source, nitrogen source, nutrient broth, iron source, and mineral elements for the growth of MTB. Besides the applications of MTB in modern biological and medical fields, little attention was made on the environmental applications of MTB for wastewater treatment, which has been summarized in this review. For example, applications of MTB as adsorbents have resulted in a novel magnetic separation technology for removal of heavy metals or organic pollutants in wastewater. In addition, we summarized the current advance on pathogen removal and detection of endocrine disruptor which can inspire new insights toward sustainable engineering and practices. Finally, the new perspectives and possible directions for future studies are recommended, such as isolation of MTB, genetic modification of MTB for mass production and new environmental applications. The ultimate objective of this review is to promote the applications of MTB and magnetosomes in the environmental fields.     

A review of measurement methods for peracetic acid (PAA)

• Physical and chemical properties and application of peracetic acid solution. • Determination method of high concentration peracetic acid. • Determination method of residual peracetic acid (low concentration). Peroxyacetic acid has been widely used in food, medical, and synthetic chemical fields for the past several decades. Recently, peroxyacetic acid has gradually become an effective alternative disinfectant in wastewater disinfection and has strong redox capacity for removing micro-pollutants from drinking water. However, commercial peroxyacetic acid solutions are primarily multi-component mixtures of peroxyacetic acid, acetic acid, hydrogen peroxide, and water. During the process of water treatment, peroxyacetic acid and hydrogen peroxide (H₂O₂) often coexist, which limits further investigation on the properties of peroxyacetic acid. Therefore, analytical methods need to achieve a certain level of selectivity, particularly when peroxyacetic acid and hydrogen peroxide coexist. This review summarizes the measurement and detection methods of peroxyacetic acid, comparing the principle, adaptability, and relative merits of these methods.     

铜陵某富硫尾矿库周边土壤重金属污染特征及风险评价

铜陵某尾矿库堆积大量富硫尾矿,为研究其氧化状况及对周边土壤的污染情况,在尾矿库和周边采集尾矿及土壤样品,测试分析尾矿及土壤样品典型重金属(Hg、As、Cr、Cd、Pb、Zn)含量和赋存形态,并基于单因子污染指数法和内梅罗综合污染指数法对土壤污染状况进行了评价。结果表明:(1)尾矿中Fe_2O_3平均占比达到38.08%(质量分数,下同),S平均占比达到5.34%;(2)尾矿库周边土壤中Cd、As、Zn、Hg严重超标,分别为《土壤环境质量农用地土壤污染风险管控标准(试行)》(GB 15618—2018)风险筛选值的6.3、3.7、1.8、1.5倍;(3)土壤中重金属主要以残渣态形式存在,但Cd、Hg、Zn的非残渣态平均占比均达到25%以上,生物有效性较高,对周边环境存在潜在危害;(4)两种污染指数法评价结果表明,尾矿库周边土壤以Cd、As、Zn污染为主,该富硫尾矿库已对周边环境造成重度污染。     

新型铁碳微电解填料制备与除磷性能评价

针对传统铁碳填料处理污水活性低的问题,通过均质化-碳化-成型工艺制备新型铁碳微电解填料,采用SEM-EDS、XRD等方法对制备填料进行了表征,探讨了新型填料除磷机理;同时,开展了填料制备条件优化及生活污水除磷性能评价研究。结果表明,新型填料(Fe-C)由于焦油经高温碳化处理可在海绵铁表面及内部孔道形成大量铁碳微原电池,提高了电化学反应速率,其磷脱除率显著高于传统填料(Fe/C);在焦油/铁比(Tar/Fe)为0.3、碳化温度为950℃、恒温时间为0 min、黏结剂质量分数为30%、900℃焙烧90 min条件下,制备的填料除磷性能最佳,除磷效率达98%,可实现含磷废水达标排放。     

硬质聚氨酯泡沫和组合聚醚中消耗臭氧层物质的便携式GC-MS测定方法

建立了便携式顶空/气相色谱-质谱法测定硬质聚氨酯泡沫和组合聚醚中一氟三氯甲烷（CFC-11）、二氟二氯甲烷（CFC-12）、二氟一氯甲烷（HCFC-22）及一氟二氯乙烷（HCFC-141b）的定性分析方法，系统考察了色谱柱、顶空体系、顶空温度和顶空时间对测定结果的影响。结果表明，DB-WAX色谱柱对目标物质的分离效果最好，顶空温度为50℃、顶空时间为10 min条件下，目标物质的检测灵敏度最高。在优化条件下，硬质聚氨酯泡沫取样体积为1 cm³时，4种目标物的方法检出限为0.6~0.8 μg；组合聚醚取样量为10 mg时，4种目标物的方法检出限为0.5~0.6 μg。该方法具有较高的灵敏度，定性准确，适用于实际样品的现场快速定性分析。     

长三角空气质量区域预报准确性评估方法研究

根据长三角空气质量区域预报工作的实际需要,对分区文字预报和落区图预报两种方式分别制定了不同的空气质量指数级别预报准确性评估方法。分区文字预报根据设定的预报准确性判定方法计算预报评分,落区图预报按区域内预报准确城市占比进行准确率统计。分区文字预报结果显示,2017年长三角区域的预报准确天数占比为62.2%,预报评分为70.2,区域预报评估效果良好。落区图预报评估结果显示,预报级别偏差具有地域性差异,安徽北部、江苏北部和江西中北部预报等级偏高,长三角中南部沿海城市预报等级偏低。该套评估方法可为区域空气质量预报偏差成因分析提供依据,为区域预报工作的改进提供定量参考。     

射阳湖浮游动物群落结构特征及其与环境因子相关性研究

2016—2017年对射阳湖开展浮游动物群落结构和水质指标逐月监测。结果表明,射阳湖共鉴定出浮游动物61种,其中原生动物、轮虫、枝角类和桡足类分别为25种、24种、7种和5种。浮游动物种类数呈现春夏季多于秋冬季的变化趋势。浮游动物优势种数量较多、分布广,群落结构相对复杂且稳定。运用Shannon-Wiener指数、均匀度指数和B/T指数对射阳湖水质作评价,结果表明,该湖处于轻度—中度污染状态,生物学指标评价法与常规水质评价结果一致。浮游动物群落结构与水质指标相关性分析表明,水温、透明度、Chl-a和DO是影响射阳湖浮游动物群落结构的主要水质指标。     

川中遂宁地区红层地下水水化学特征及主要离子来源分析

四川红层区居民用水主要为就近开采的地下水,水质参差不齐,研究红层地下水水文地球化学特征,对于宜井区选择,红层水源地用水安全具有重要意义。利用在遂宁船山区采集的70组浅层地下水水样,采用数理统计分析、离子比例关系等方法,分析了红层浅层地下水水化学特征及主要离子来源,研究得出:区内地下水中阴离子以HCO_3~-(164.00～571.91 mg·L~(-1))为主,其次是SO_4~(2-)(13.96～1 000.00 mg·L~(-1)),阳离子以Ca~(2+)(45.70～313.00 mg·L~(-1))为主,其中孔隙水的水化学类型主要为HCO_3,SO_4-Ca,SO_4-Mg型,裂隙水以HCO_3-Ca,Mg型与HCO_3-Ca型为主;地下水中离子成分主要由岩石风化产生,来源于地层中的方解石、白云石、石膏、芒硝等矿物的风化溶解,蒸发浓缩、地下水酸碱环境及人类活动对地下水成分造成了一定的影响;浅层地下水质量以Ⅲ～Ⅳ类为主,污染物主要为TDS、Fe~(3+)等原生污染,也存在NO_3~-、NO_2~-等人类活动污染;红层宜井区主要为平坝、丘坡坡脚及沟谷一带,为避免污染指标超标,井深不宜超过25m,远离养殖场、农厕等地下水易受人类活动污染的环境,防止鱼塘、农田等地表水进入井中。     

不同喷雾方式下低阻文丘里振弦栅除尘配置优化实验研究

为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果，以除尘效率和系统阻力为参照，选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计，在特定参数条件下，2种喷雾方式的因素影响排序相同，除尘效率为纤维栅数＞纤维丝间隙＞喉管气速＞喷雾量；系统阻力为喉管气速＞纤维栅数＞纤维丝间隙＞喷雾量；径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板；轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板；在最优配置下的除尘性能为径向外喷＞轴向喷雾。