Characteristics of azaarenes and dioxins in gases emitted from waste incinerators

In this study, we propose an analytical method to determine the fourteen of azaarenes present in flue gas samples collected according to Japanese Industrial Standard K 0311, which designates the method for the determination of dioxins in flue gas. Azaarenes can be analyzed using the acidic water phase after shaking extraction with dichloromethane, which is unnecessary for dioxin analysis. Flue gas samples were obtained from 24 waste incinerators in Japan, and azaarenes were detected in all the flue gas samples (0.21–3800 μg/m³ _N). The most abundant of the detected compounds were quinoline and isoquinoline. The concentration of azaarenes had a tendency to increase with that of polychlorinated dibenzo-p-dioxins and dibenzofurans. The isomer distribution of heptachloro-dibenzofurans (HpCDFs) was calculated using the computed Gibbs energy of formation (ΔG _f ) obtained by the semiempirical molecular orbital method at various temperatures. The calculated isomer distribution was fitted to the measured value of HpCDFs. It seems that the temperature obtained from the fitting calculations is an indicator of the cooling capacity of the combustion gas in an incinerator. The computed ΔG _f also explained the measured isomer distributions of azaarenes. It is suggested that the isomer distribution of azaarenes in the combustion process is thermodynamically controlled. This work was presented in part at the International Conference on Combustion, Incineration/Pyrolysis, and Emission Control, 2006, Kyoto     

Comprehensive temperature monitoring in an in-vessel forced-aeration static-bed composting process

Comprehensive temperature monitoring was done in an in-vessel forced-aeration static-bed composting process using sewage sludge. The three layers that divided the compost pile horizontally showed different temperature distributions. The temperature of the top layer appeared not to be influenced by the ambient temperature. The temperature of the center area of the top layer was taken to be the representative temperature for evaluating composting start-up performance. The temperature of the bottom layer was strongly influenced by the ambient temperature, and the temperature of the center area of the bottom layer was taken to be the representative temperature for pathogen control as it was the minimum temperature in the reactor. Composting start-up performance was influenced by several factors when the ambient temperature was either below or above 20°C. When the ambient temperature was below 20°C, the time taken to reach 65°C (T ₆₅) was influenced by the temperature of inflowing air, but when the temperature was higher than 20°C, it was influenced by the ratio of sewage sludge to seed compost (F/S). T ₆₅ was least when F/S was 1–2. Received: January 9, 2001 / Accepted: October 10, 2001     

Sorption of biodegradation end products of nonylphenol polyethoxylates onto activated sludge

IntroductionRecently ,nonylphenolpolyethoxylates (NPnEO (n :numberofethoxyunits(EOs) )havebecomeaproblematicissueforthereasonthatthesecompounds,animportantgroupofnonionicsurfactants ,havebeenusedwidelyinvariousindustriesasflocculants,dispersants,emulsifie…     

Comparative evaluation of processes for heavy metal removal from municipal solid waste incineration fly ash

１ＩｎｔｒｏｄｕｃｔｉｏｎＩｔｈａｓｂｅｅｎｒｅｐｏｒｔｅｄｔｈａｔｍｕｎｉｃｉｐａｌｓｏｌｉｄｗａｓｔｅｉｎｃｉｎｅｒａｔｉｏｎｆｌｙａｓｈ（ＭＳＷＦＡ）ｃｏｎｔａｉｎｓｃｏｎｓｉｄｅｒａｂｌｅａｍｏｕｎｔｓｏｆｈｅａｖｙｍｅｔａｌｓ（Ｂｅｒｇ，１...     

Bioleaching of metal from municipal waste incineration fly ash using a mixed culture of sulfur-oxidizing and iron-oxidizing bacteria

We investigated the behavior and characteristics of metal leaching from municipal solid waste incineration (MSWI) fly ash among pure cultures of a sulfur-oxidizing bacterium (SOB) and an iron-oxidizing bacterium (IOB) and a mixed culture. The IOB has a high metal-leaching ability, though its tolerability against the ash addition is low. The SOB might better tolerate an increase in ash addition than the IOB, though metal leaching ability of the SOB is limited. Mixed culture could compensate for these deficiencies, and high metal leachability was exhibited in the 1% ash culture, i.e., 67% and 78% of leachabilities for Cu and Zn, respectively, and 100% for Cr and Cd. Furthermore, comparably high leachabilities such as 42% and 78% for Cu and Zn were observed even in the 3% ash cultures. Characterization of metal leaching by the mixed culture revealed that the acidic and oxidizing condition had remained stable thorough the experimental period. Ferric iron remained in the mixed culture, and the metal leaching was enhanced by redox mechanisms coupling with the leaching by sulfate. An increase of ferrous iron enhanced the Cr, Cu, and As leaching. The optimum concentration of sulfur existed for As and Cr (5 gl(-1)) and Cu (2 gl(-1)). The presence of the degradable and non-degradable organic compound that must be existed in the natural environment or waste landfills made no significant change in the leachability of metals other than Zn. These results suggested that bioleaching using a mixed culture of SOB and IOB is a promising technology for recovering the valuable metals from MSWI fly ash.     

The degradability of biodegradable plastics in aerobic and anaerobic waste landfill model reactors

Degradabilities of four kinds of commercial biodegradable plastics (BPs), polyhydroxybutyrate and hydroxyvalerate (PHBV) plastic, polycaprolactone plastic (PCL), blend of starch and polyvinyl alcohol (SPVA) plastic and cellulose acetate (CA) plastic were investigated in waste landfill model reactors that were operated as anaerobically and aerobically. The application of forced aeration to the landfill reactor for supplying aerobic condition could potentially stimulate polymer-degrading microorganisms. However, the individual degradation behavior of BPs under the aerobic condition was completely different. PCL, a chemically synthesized BP, showed film breakage under the both conditions, which may have contributed to a reduction in the waste volume regardless of aerobic or anaerobic conditions. Effective degradation of PHBV plastic was observed in the aerobic condition, though insufficient degradation was observed in the anaerobic condition. But the aeration did not contribute much to accelerate the volume reduction of SPVA plastic and CA plastic. It could be said that the recalcitrant portions of the plastics such as polyvinyl alcohol in SPVA plastic and the highly substituted CA in CA plastic prevented the BP from degradation. These results indicated existence of the great variations in the degradability of BPs in aerobic and anaerobic waste landfills, and suggest that suitable technologies for managing the waste landfill must be combined with utilization of BPs in order to enhance the reduction of waste volume in landfill sites.     

Determination of PCDD/Fs and dioxin-like PCBs in fish oils for feed ingredients by congener-specific chemical analysis and CALUX bioassay

The present research was intended to determine the suitability of the CALUX assay as a screening method for dioxins in fish oil used as a feed ingredient in Japan. Alteration of TEQ in fish oil according to newly proposed toxic equivalency factors (TEF) is also discussed. In the analysis, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in 41 fish oil samples were determined by using high-resolution gas chromatography/high-resolution mass spectrometry (HRGC/HRMS) and CALUX bioassay. The mean TEQ values derived from 1998 WHO-TEF of PCDD/Fs and DL-PCBs were 2.6 and 9.9 pg g(-1) (ww), respectively. The levels of TEQ derived from the recently re-evaluated 2005 WHO-TEF were slightly lower than those of the former in both groups. Notably, the contribution of mono-ortho DL-PCBs to total 2005 WHO-TEQ was considerably decreased compared to the case of 1998 WHO-TEQ, resulting from the reduction in its TEF values, while the non-ortho DL-PCBs contribution was increased. The mean TEQ determined by CALUX assay for PCDD/Fs was approximately three times higher, whereas DL-PCBs was approximately two times lower than WHO-TEQ determined by HRGC/HRMS; the sum of PCDD/Fs and DL-PCBs was very similar by both methods. The correlation coefficients of TEQ between the CALUX assay and HRGC/HRMS analysis were 0.84, 0.89, and 0.90 for PCDD/Fs, DL-PCBs, and the sum, respectively. These results suggest that the CALUX assay is a very useful method for the screening of dioxin-related compounds in fish oils.     

长良川水质中溶解氧和化学耗氧量预测模型的建立

文章介绍了GMDH(group method of data handling)方法的基本运算法则，运用改进后的GMDH方法，建立长良川溶解氧和化学耗氧量两个水质项目的长期预到模型，模型相关度可达0．96，基本满足要求，并根据模型对水质变化机理进行分析。     

Photodegradation fates of cis-chlordane, trans-chlordane, and heptachlor in ethanol

cis-Chlordane, trans-chlordane, and heptachlor were photodegraded in ethanol, and their degradation fates and degradation products were determined by a computational chemical method. The most degradable material was heptachlor (first-order reaction constant k=0.13 min(-1)). Chlorine balances changed during UV irradiation, and the chlorine atoms in chlordane and heptachlor were eventually mineralized. cis-Chlordane, trans-chlordane and heptachlor each generated two di-dechlorinated products. Reactivities at various positions in these compounds were predicted on the basis of bond dissociation energies calculated by nonempirical molecular orbital calculation (Gaussian 98W).