Production and characterization of biodiesel from Eriobotrya Japonica seed oil: an optimization study

Biodiesel is now-a-days recognized as a real potential alternative to petroleum-derived diesel fuel due to its number of desirable characteristics. However, its higher production cost resulting mainly due to use of costly food-grade vegetable oils as raw materials is the major barrier to its economic viability. Present work is an attempt to explore the potential of Eriobotrya japonica seed oil for the synthesis of biodiesel using alkali-catalyzed transesterification. Optimization of production parameters, namely molar ratio of alcohol to oil, amount of catalyst, reaction time and temperature, was carried out using Taguchi method. Fatty acid composition of both oil and biodiesel was determined using GC and H¹ NMR. Alcohol to oil molar ratio of 6:1, catalyst amount of 1% wt/wt, 2 h reaction time and 50 ^°C reaction temperature were found to be the optimum conditions for obtaining 94.52% biodiesel. Highest % contribution was shown by the ‘amount of catalyst’ (67.32%) followed by molar ratio of alcohol to oil (25.51%). Major fuel properties of E. japonica methyl esters produced under optimum conditions were found within the specified limits of ASTM D6751 for biodiesel, hence it may be considered a prospective substitute of petro-diesel.     

Autotrophic denitrification using hydrogen oxidizing bacteria in continuous flow biofilm reactor

Autotrophic denitrification was investigated in five bench‐scale upflow attached growth reactors using hydrogen oxidizing bacteria under anoxic conditions. The performance of sand, granular activated carbon (GAC), crushed pumice, crushed volcanic rock, and plastic media were evaluated as the support material. The reactors were inoculated with acclimated cultures obtained from domestic sewage treatment plant. A synthetic solution containing nitrate was used as the influent. The reactor performance was evaluated by measuring influent and effluent nitrate concentration. The design parameters demonstrated that the effectiveness of autotrophic denitrification is comparable to that of the heterotrophic process and may be utilized economically for drinking water treatment either as the main process or as a supplemental process for ion exchange regenerant treatment.     

Effect of DTPA on Cd solubility in soil – Accumulation and subsequent toxicity to lettuce

In a controlled environment experiment, using Cd spiked soil, lettuce plants were grown under a range of DTPA levels and were subsequently harvested to determine levels of phytoaccumulation. Cadmium phytoaccumulation significantly increased with increasing soil Cd level (P < 0.05) but unexpectedly decreased with increasing DTPA levels, despite the fact that solubility of Cd was increased in the soil. Cadmium translocation (from root to shoot) increased after DTPA application. Lettuce growth was inhibited by both Cd and DTPA (at and above 10 and 500 mg kg^?1 respectively), as a result of higher Cd mobility and subsequent toxicity which was caused by DTPA higher dosages. Metal solubility in the soil (ranged between 2.8 and 26.5 mg kg^?1) was found to be significantly higher (P < 0.01) as compared to control with increasing DTPA levels even after 3 months of DTPA application. Cadmium tissue concentration in all DTPA treatments was less than in the corresponding control treatment, indicating a negative effect of DTPA application on Cd uptake. In conclusion, lettuce was an unsuitable plant species for Cd accumulation, at least when associated with a DTPA chelator.     

Potential environmental impact of dissolution of raw phosphate in sea water of the Gulf of Aqaba

Dissolution of raw phosphate (apatite) in sea water of the Gulf of Aqaba was investigated through lab incubation experiments. Three types from three different sources (Al-Hasa, Al-Abyad and Esh-Shydiya) have been used for these experiments. Impact of quantity, grain size, and source (type) of raw phosphate on dissolution rate were studied. Statistical analysis shows significant differences between the results obtained from comparing each two weights; as weight of apatite increased, dissolved inorganic phosphate-phosphorus (DIP) and fluoride in sea water solution increased. The differences between the dissolution rates of raw phosphate from the three sites were not significant while the differences between the different grain size fractions were significant. Dissolution rates were inversely related to particle size. Using a worst-case scenario, a conservative estimate of the maximum increase in DIP in seawater of the Gulf of Aqaba due to the apatite particles lost to the sea during ship loading resulted in DIP concentrations of 0.03 μM per year. As the residence time of the water in the Gulf of Aqaba is about one year, the DIP concentration will not increase by more than 0.03 μM under the estimated annual quantity of exported phosphate. Fluoride will not increase by more than 0.03 mg/l under the same conditions.     

The trade-off between economic growth and environmental quality: does economic freedom asymmetric matter for Pakistan?

Environmental Science and Pollution Research - This empirical study investigates the dynamic effects of economic freedom on economic growth and air quality for Pakistan over the period...     

Do renewable energy and globalization enhance ecological footprint: an analysis of top renewable energy countries?

Environmental Science and Pollution Research - This paper aims at estimating the dynamic impact of renewable and non-renewable energy consumption, globalization, urbanization, and economic growth...     

Physical infrastructure,energy consumption,economic growth,and environmental pollution in Pakistan: an asymmetry analysis

Environmental Science and Pollution Research - This study explores the symmetric and asymmetric effects of physical infrastructure on energy consumption, economic growth, and air pollution of...     

Photocatalytic degradation of disperse blue 1 using UV/TiO2/H2O2 process

The photocatalytic degradation of a dye derivative, C.I. disperse blue 1 (1), has been investigated under UV light irradiation in the presence of TiO2 and H2O2 under a variety of conditions. The degradation was studied by monitoring the change in substrate concentration employing UV spectroscopic technique as a function of irradiation time. The degradation was studied under different conditions such as different types of TiO2, reaction pH, catalyst and substrate concentration containing hydrogen peroxide (H2O2), besides molecular oxygen in the presence of TiO2. The degradation of dye was also investigated under sunlight and the efficiency of degradation was compared with that of the artificial light source. The degradation rates were found to be strongly influenced by all the above parameters. The photocatalyst Degussa P25 was found to be more efficient for the degradation of the dye.     

Enrichment and isolation of endosulfan-degrading microorganisms

Endosulfan (6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-methano-2,3,4-benzo-dioxathiepin-3-oxide) is a cyclodiene organochlorine currently used as an insecticide all over the world and its residues are posing a serious environmental threat. This study reports the isolation and identification of enriched microorganisms, capable of degrading endosulfan. Enrichment was achieved by using the insecticide as either the sole source of carbon or sulfur in parallel studies. Two strains each of fungi (F1 and F4) and bacteria (BF2 and B4) were selected using endosulfan as a sole carbon source. A Pandoraea species (Lin-3) previously isolated in our laboratory using lindane (gamma-HCH) as a carbon source was also screened for endosulfan degradation. F1 and F4 (Fusarium ventricosum) degraded alpha-endosulfan by as much as 82.2 and 91.1% and beta-endosulfan by 78.5 and 89.9%, respectively, within 15 d of incubation. Bacterial strains B4 and Lin-3 degraded alpha-endosulfan up to 79.6 and 81.8% and beta-endosulfan up to 83.9 and 86.8%, respectively, in 15 d. Among the bacterial strains isolated by providing endosulfan as a sulfur source, B4s and F4t degraded alpha-endosulfan by as much as 70.4 and 68.5% and beta-endosulfan by 70.4 and 70.8%, respectively, after 15 d. Degradation of the insecticide occurred concomitant with bacterial growth reaching an optical density (OD600) of 0.366 and 0.322 for B4 and Lin-3, respectively. High OD600 was also noted with the other bacterial strains utilizing endosulfan as a sulfur source. Fungal and bacterial strains significantly decreased the pH of the nutrient culture media while growing on endosulfan. The results of this study suggest that these novel strains are a valuable source of potent endosulfan-degrading enzymes for use in enzymatic bioremediation.