Livelihood vulnerability to climate change in the mountains of Northern Vietnam: comparing the Hmong and the Dzao ethnic minority populations

Environment, Development and Sustainability - Livelihoods of ethnic minority populations living in the mountains of Northern Vietnam are highly vulnerable to climate-induced natural hazards....     

High photocatalytic removal of NO gas over SnO2 nanoparticles under solar light

Environmental Chemistry Letters - Tin oxide nanoparticles (SnO2 NPs) with a diameter less than 10 nm are usually used in waste water treatment via the photocatalytic reaction. However,...     

Fully Bio-Sourced Nylon 11/Raw Lignin Composites: Thermal and Mechanical Performances

Ecofriendly fully bio-composites based on polyamide 11 (PA11) and lignin have been prepared on the entire concentration range using a twin-screw extruder. In this work, PA11 was blended with lignin by direct extrusion technology without any chemical pre- or in-situ- modifications or physical pretreatments. The presence of various organic and inorganic impurities in the selected technical lignin have been maintained. The incorporation of this cheap renewable material from biomass in bio-based PA11 was inspected by an array of characterization tools. Also, the effect of the presence of lignin on the morphology and on the mechanical properties of the resulting materials was examined. Finally, in-situ investigation of structural evolution in PA11 induced by the presence of lignin was analyzed by Fast Scanning Chip Calorimetry.     

Forest resources and household welfare: Empirical evidence from North Central Vietnam

Using secondary data from a socio-economic quantitative household survey of the North Central region of Vietnam, the main aim of our study is to analyze the causal effect of forest resources on household income and poverty. Based on the observed characteristics of a forest-based livelihood and forest-related activities, we use a propensity score matching (PSM) method to control for potential bias arising from self-selection. The PSM results indicate that households with a forest-based livelihood had a higher level of income and lower poverty rates than did those without. Interestingly, our findings confirm that a forest-based livelihood offers much higher income than any other type of livelihood adopted by local households. Also, the poverty rate among households with a forest-based livelihood is lower than those earning non-labor income or engaged in wage/crop and crop livelihoods. Among households and provinces, we find varying opportunities deriving from forest resources, suggesting that there are potential barriers hindering local households from pursuing a forest livelihood or participating in some forest activities. Therefore, government policy and regulations on forest management should focus on improving the access of households to forest resources, while enhancing the sustainability of these resources.     

Estimating the generation of recycled metals from obsolete motorcycles in Vietnam for ELV management

Journal of Material Cycles and Waste Management - The demand for various modes of transportation has significantly increased around the world due to rapid urbanization, the increase in population,...     

Storm impacts along European coastlines. Part 2: lessons learned from the MICORE project

This paper describes the MICORE approach to quantify for nine field sites the crucial storm related physical hazards (hydrodynamic as well as morphodynamic) in support of early warning efforts and emergency response.As a first step historical storms that had a significant morphological impact on a representative number of sensitive European coastal stretches were reviewed and analysed in order to understand storm related morphological changes and how often they occur around Europe. Next, an on-line storm prediction system was set up to enable prediction of storm related hydro- and morphodynamic impacts. The system makes use of existing off-the-shelf models as well as a new open-source morphological model. To validate the models at least one year of fieldwork was done at nine pilot sites. The data was safeguarded and stored for future use in an open database that conforms to the OpenEarth protocols.To translate quantitative model results to useful information for Civil Protection agencies the Frame of Reference approach ( [Van Koningsveld et al., 2005] and [Van Koningsveld et al., 2007] ) was used to derive Storm Impact Indicators (SIIs) for relevant decision makers. The acquired knowledge is expected to be directly transferred to the civil society trough partnerships with end-users at the end of the MICORE project.     

Revisions to the derivation of the Australian and New Zealand guidelines for toxicants in fresh and marine waters

The Australian and New Zealand Guidelines for Fresh and Marine Water Quality are a key document in the Australian National Water Quality Management Strategy. These guidelines released in 2000 are currently being reviewed and updated. The revision is being co-ordinated by the Australian Department of Sustainability, Environment, Water, Population and Communities, while technical matters are dealt with by a series of Working Groups. The revision will be evolutionary in nature reflecting the latest scientific developments and a range of stakeholder desires. Key changes will be: increasing the types and sources of data that can be used; working collaboratively with industry to permit the use of commercial-in-confidence data; increasing the minimum data requirements; including a measure of the uncertainty of the trigger value; improving the software used to calculate trigger values; increasing the rigour of site-specific trigger values; improving the method for assessing the reliability of the trigger values; and providing guidance of measures of toxicity and toxicological endpoints that may, in the near future, be appropriate for trigger value derivation. These changes will markedly improve the number and quality of the trigger values that can be derived and will increase end-users’ ability to understand and implement the guidelines in a scientifically rigorous manner.     

Human factors and tidal influences on water quality of an urban river in Can Tho, a major city of the Mekong Delta, Vietnam

In this study, we focused on water quality in an urban canal and the Mekong River in the city of Can Tho, a central municipality of the Mekong Delta region, southern Vietnam. Water temperature, pH, electrical conductivity, BOD₅, COD_Cr, Na⁺, Cl^?, NH₄ ⁺?N, SO₄ ^2??S, NO₃ ^??N, and NO₂ ^??N for both canal and river, and tide level of the urban canal, were monitored once per month from May 2010 to April 2012. The urban canal is subject to severe anthropogenic contamination, owing to poor sewage treatment. In general, water quality in the canal exhibited strong tidal variation, poorer at lower tides and better at higher tides. Some anomalies were observed, with degraded water quality under some high-tide conditions. These were associated with flow from the upstream residential area. Therefore, it was concluded that water quality in the urban canal changed with a balance between dilution effects and extent of contaminant supply, both driven by tidal fluctuations in the Mekong River.     

Deriving environmental quality standards in European surface waters: when are there too few data?

Recent technical guidance has been published by the European Commission that outlines methodologies for the derivation of Environmental Quality Standards (EQS) in European surface waters under the Water Framework Directive (WFD). The guidance allows the derivation of a long-term EQS from a small dataset. Specifically an EQS can be derived from just three acute data points, although the safety factors built into such an EQS are large (e.g. up to a factor of 1,000). Large safety factors make such EQS uncertain, and often difficult to achieve in practice. We examine dataset requirements for the derivation of EQS and specifically the minimum number of tests needed for setting EQS for long-term chemical exposures that result in reduced relative uncertainty, as assessed simply through the reduction in standard deviation of the means of the values derived. Using ecotoxicity datasets for four example chemicals, for which EQS have been derived in many jurisdictions, we show that variation in the EQS is greatest when using the minimum dataset allowable under the WFD guidance, but decreases rapidly when seven or more datapoints are available. Increasing the minimum number of ecotoxicity data in deriving an EQS results in a greater understanding of ecotoxicological effects. With this knowledge, the mitigating effects of water chemistry can be accounted for in deriving an EQS, even with relatively limited datasets. The new guidance suggests “simplistic” approaches to account for chemical availability, but does not detail how this might be undertaken. We provide examples of ways by which water chemistry effects can be included in deriving implementable EQS for metals with relatively few reliable and relevant data.