Clove bud oil: an efficient, economical and widely available oil for the inhibition of wheat seed germination

Pre-harvest sprouting refers to the precocious germination of the grain in the spike prior to harvest as a result of moist weather conditions at harvest time. From the agricultural viewpoint, it is necessary to impose an exogenous dormancy to wheat seeds in order to improve the resistance of seed to pre-harvest sprouting. In this regard, we found that clove bud essential oil is a strong inhibitor for wheat seed germination. The extract obtained from clove bud by supercritical fluid extraction using CO₂ as solvent minimized the number of extracts to two compounds, eugenol and eugenyl acetate. Eugenol, as the main constituent of the oil, was responsible for its strong inhibitory activity in wheat seeds. The aqueous solution of clove bud oil was submitted to germination assay at various concentrations from 50 to 400 mg/L. Complete inhibition of seed germination was recorded when the concentration was 400 mg/L. Roots and sprouts have similar sensitivity to inhibitory effect. In an empirical study, the synergistic cooperation of eugenol and eugenyl acetate from clove bud oil in the inhibition of seed germination was found to be a 1:1 ratio. The clove bud essential oil is widely available and will broaden the horizon of applications for natural and safe inhibitors in the fields.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

A nanosilver-based spectrophotometric method for sensitive determination of methyl violet in river water

A method is reported for the determination of methyl violet in the range of 10–120 nmol L^?1. The method is based on the catalytic effect of silver nanoparticles (AgNPs) on the oxidation reaction of methyl violet by potassium bromate in acid medium. The reaction is followed spectrophotometrically by measuring the change in absorbance () at 620 nm using a fixed time method. The reaction variables were optimized in order to achieve highest sensitivity. The 3б criterion detection limit was 5 nmol L^?1, and the relative standard deviation for ten replicate determinations at a concentration of methyl violet of 15 nmol L^?1 was 0.97% (n = 10). The method was successfully applied to the determination of methyl violet in river water samples.     

Magnetic Cr(VI) Ion Imprinted Polymer for the Fast Selective Adsorption of Cr(VI) from Aqueous Solution

In this study, a novel magnetic Cr(VI) ion imprinted polymer (Cr(VI)-MIIP) was successfully synthesized and used as a selective sorbent for the adsorption of Cr(VI) ions from aqueous solution. It can be synthesized through the combination of an imprinting polymer and magnetic nanoparticles. The high selectivity achieved using MIIP is due to the specific recognition cavities for Cr(VI) ions created in Cr(VI)-MIIP. Also, the magnetic properties that could be obtained using magnetic nanoparticles, helps to separate adsorbent with an external magnetic field without either additional centrifugation or filtration procedures. The magnetic Fe₃O₄ nanoparticles (MNPs) were synthesized using an improved co-precipitation method and modified with tetraethylorthosilicate (TEOS) before imprinting. The magnetic Cr(VI) ion imprinted polymer was prepared through precipitation copolymerization of 4-vinylpyridine as the complexing monomer, 2-hydroxyethyl methacrylate as a co-monomer, the Cr⁶⁺ anion as a template, and ethylene glycol dimethacrylate (EGDMA) as a cross-linker in the presence of modified magnetite nanoparticles. This novel synthesized sorbent was characterized using different techniques. Batch adsorption experiments were performed to evaluate the adsorption conditions, selectivity, and reusability. The results showed that the maximum adsorption capacity was 39.3 mg g^?1, which was observed at pH 3 and at 25?°C. The equilibrium time was 20 min, and the amount of adsorbent which gave the maximum adsorption capacity was 1.7 g L^?1. Isotherm studies showed that the adsorption equilibrium data were fitted well with the Langmuir adsorption isotherm model and the theoretical maximum adsorption capacity was 44.86 mg g^?1. The selectivity studies indicated that the synthesized sorbent had a high single selectivity sorption for the Cr(VI) ions in the presence of competing ions. Thermodynamic studies revealed that the adsorption process was exothermic (\(\Delta H\)?<?0) and spontaneous (\(\Delta G\)?<?0). In addition, the spent MIIP can be regenerated up to five cycles without a significant decrease in adsorption capacity.     

Ultra-sensitive quantification of copper in food and water samples by electrochemical adsorptive stripping voltammetry

A new electrochemical adsorptive stripping voltammetry method was developed for the determination of trace amounts of copper in food and water samples. The study of electrochemical behavior of Cu ion indicated that Cu(II) and Schiff base formed a complex in H₃BO₄–NaOH buffer solution (pH?=?7.25). An accumulation potential of ?100 mV (vs Ag/AgCl) was applied while the solution was stirred for 60 s. The response curve was recorded by scanning the potential, and the peak current of ?0.31 V (vs Ag/AgCl) was recorded. The peak current and concentration of copper accorded with linear relationship in the range of 0.04–120 ng mL^?1. The relative standard deviation (for 12 ng mL^?1 of copper) was 1.73 %, and the detection limit was 0.007 ng mL^?1. The possible interference of some common ions was studied. The proposed method was applied to the determination of copper in water, rice, wheat, tea, milk, and tomato with satisfactory results.     

Impact of crude oil exposure on nitrogen cycling in a previously impacted Juncus roemerianus salt marsh in the northern Gulf of Mexico

This study investigated potential nitrogen fixation, net nitrification, and denitrification responses to short-term crude oil exposure that simulated oil exposure in Juncus roemerianus salt marsh sediments previously impacted following the Deepwater Horizon accident. Temperature as well as crude oil amount and type affected the nitrogen cycling rates. Total nitrogen fixation rates increased 44 and 194 % at 30 °C in 4,000 mg kg^?1 tar ball and 10,000 mg kg^?1 moderately weathered crude oil treatments, respectively; however, there was no difference from the controls at 10 and 20 °C. Net nitrification rates showed production at 20 °C and consumption at 10 and 30 °C in all oil treatments and controls. Potential denitrification rates were higher than controls in the 10 and 30?ºC treatments but responded differently to the oil type and amount. The highest rates of potential denitrification (12.7?±?1.0 nmol N g^?1 wet h^?1) were observed in the highly weathered 4,000 mg kg^?1 oil treatment at 30 °C, suggesting increased rates of denitrification during the warmer summer months. These results indicate that the impacts on nitrogen cycling from a recurring oil spill could depend on the time of the year as well as the amount and type of oil contaminating the marsh. The study provides evidence for impact on nitrogen cycling in coastal marshes that are vulnerable to repeated hydrocarbon exposure.     

Hollow-fiber liquid-phase microextraction based on carrier-mediated transport for determination of urinary methyl hippuric acids

Hollow-fiber liquid-phase microextraction based on carrier-mediated transport for analysis of methyl hippuric acids in aqueous samples is described. Under optimized conditions, relative recoveries of 83%–98% and limits of detection of 2–3 µg L^?1 were obtained, with linear calibration curves for the three isomers in the range of 10–50,000 µg L^?1. The method was applied for the determination of urine samples of volunteers at various working environments.     

A nanosilver-based spectrophotometric method for determination of malachite green in surface water samples

A new spectrophotometric method is reported for the determination of nanomolar level of malachite green in surface water samples. The method is based on the catalytic effect of silver nanoparticles on the oxidation of malachite green by hexacyanoferrate (III) in acetate–acetic acid medium. The absorbance is measured at 610 nm with the fixed-time method. Under the optimum conditions, the linear range was 8.0?×?10^?9–2.0?×?10^?7?mol?L^?1 malachite green with a correlation coefficient of 0.996. The limit of detection (S/N?=?3) was 2.0?×?10^?9?mol?L^?1. Relative standard deviation for ten replicate determinations of 1.0?×?10^?8?mol?L^?1 malachite green was 1.86 %. The method is featured with good accuracy and reproducibility for malachite green determination in surface water samples without any pre-concentration and separation step.