Field scale evaluation of volatile organic compound production inside biosecure swine mortality composts

Emergency mortality composting associated with a disease outbreak has special requirements to reduce the risks of pathogen survival and disease transmission. The most important requirements are to cover mortalities with biosecure barriers and avoid turning compost piles until the pathogens are inactivated. Temperature is the most commonly used parameter for assessing success of a biosecure composting process, but a decline in compost core temperature does not necessarily signify completion of the degradation process. In this study, gas concentrations of volatile organic compounds (VOCs) produced inside biosecure swine mortality composting units filled with six different cover/plant materials were monitored to test the state and completion of the process. Among the 55 compounds identified, dimethyl disulfide, dimethyl trisulfide, and pyrimidine were found to be marker compounds of the process. Temperature at the end of eight weeks was not found as an indicator of swine carcass degradation. However, gas concentrations of the marker compounds at the end of eight weeks were found to be related to carcass degradation. The highest gas concentrations of the marker compounds were measured for the test units with the lowest degradation (highest respiration rates). Dimethyl disulfide was found to be the most robust marker compound as it was detected from all composting units in the eighth week of the trial. Concentration of dimethyl disulfide decreased from a range of 290–4340 ppmv to 6–160 ppbv. Dimethyl trisulfide concentrations decreased to a range of below detection limit to 430 ppbv while pyrimidine concentrations decreased to a range of below detection limit to 13 ppbv.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

Food decay and offensive odorants: A comparative analysis among three types of food

In this study, a list of offensive odorants including reduced sulfur, carbonyls, nitrogenous, and volatile organic compounds was measured by the indirect (instrumental) method during the decay processes of three food types (snipe egg, mackerel, and squid). The strengths of the odor release were also quantified in terms of dilution-to-threshold (D/T) ratio based on the air dilution sensory test. To collect odor samples for each food type, decaying experiments were conducted in 100 mL throwaway syringes for 1 month. The results showed that ammonia had the largest mean ranging from 385 ppm (fish) to 554 ppm (egg). However, most odorants generally fell in the range of 0.01–10 ppm, regardless of food type. The odor strengths measured with the suprathreshold method in terms of average D/T values increased on the order of 33,520 (egg), 202,330 (fish), and 766,330 (squid). These results were highly comparable to the patterns of odor indices derived by empirical conversion of odorant concentration data. The overall results of this study thus suggest that a unique pattern of odor release develops among different odorants as well as food type.     

Increased 3HV Concentration in the Bacterial Production of 3-Hydroxybutyrate (3HB) and 3-Hydroxyvalerate (3HV) Copolymer with Acid-Digested Rice Straw Waste

Bacterial synthesis of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) copolymer [P(3HB-co-3HV)] using the hydrolysate of rice straw waste as a carbon source was affected by the composition of the hydrolysate, which depends highly on the rice straw pretreatment condition. Acid digestion with 2 % sulfuric acid generated larger production of P(3HB-co-3HV) than 6 % sulfuric acid, but 3HV concentration in the copolymer produced with 2 % acid hydrolysate was only 8.8 % compared to 18.1 % with 6 % acid hydrolysate. To obtain a higher 3HV mole fraction for enhanced flexibility of the copolymer, an additional heating was conducted with the 2 % acid hydrolysate after removal of residual rice straw. As the additional heating time increased a higher concentration of levulinic acid was generated, and consequently, the mole fraction of 3HV in P(3HB-co-3HV) increased. Among the conditions tested (i.e., 20-, 40-, 60-min), 60-min additional heating following 2 % sulfuric acid digestion achieved the highest 3HV mole fraction of 22.9 %. However, a longer heating time decreased the P(3HB-co-3HV) productivity, probably due to the increased intermediates concentrations acting as inhibitors in the hydrolysates. Therefore, the use of additional heating needs to consider both the increase in the 3HV mole fraction and the decrease in the P(3HB-co-3HV) productivity.     

Bioleaching of metals from spent lithium ion secondary batteries using Acidithiobacillus ferrooxidans

Bioleaching of spent lithium ion secondary batteries, containing LiCoO2, was attempted in this investigation. The present study was carried out using chemolithotrophic and acidophilic bacteria Acidithiobacillus ferrooxidans, which utilized elemental sulfur and ferrous ion as the energy source to produce metabolites like sulfuric acids and ferric ion in the leaching medium. These metabolites helped dissolve metals from spent batteries. Bio-dissolution of cobalt was found to be faster than lithium. The effect of initial Fe(II) concentration, initial pH and solid/liquid (w/v) ratio during bioleaching of spent battery wastes were studied in detail. Higher Fe(II) concentration showed a decrease in dissolution due co-precipitation of Fe(III) with the metals in the residues. The higher solid/liquid ratio (w/v) also affected the metal dissolution by arresting the cell growth due to increased metal concentration in the waste sample. An EDXA mapping was carried out to compare the solubility of both cobalt and lithium, and the slow dissolution rate was clearly found from the figures.     

Removal of insoluble chloride from bottom ash for recycling

In order to recycle bottom ash and use it as raw material for cement production, the removal of insoluble chloride was investigated by testing various washing techniques. The present work is also focused on investigating the properties of insoluble chlorides and determining the conditions for dissolving these compounds in order to reduce the chlorine content to the required level, i.e., less than 0.1 wt%. Within this framework, the effect of washing with water and CO2 bubbling was investigated, because the main insoluble chloride found in bottom ash, i.e., Friedel's salt, can be dissolved by CO2. Then, in order to better understand the removal of Cl, Friedel's salt was artificially synthesized by hydration and then the effect of CO2 bubbling was investigated. If all chlorides in the ash are converted into Friedel's salt by hydration, all chlorides can then be dissolved by CO2 bubbling. In addition, the effect of pH on removing the remaining insoluble chlorides was investigated by washing the ash with sulfuric acid solution. It was found that the most effective technique to reduce the Cl content to less than 1000 ppm was washing with sulfuric acid solution, while keeping the pH value at less than 4. By using this method, Friedel's salt and other insoluble chlorides were dissolved.     

Treatment of 2,4-dichlorophenol polluted soil with free and immobilized laccase

Enzyme treatment is currently considered for remediation of terrestrial systems polluted with organic compounds. In this study, two soils from Pennsylvania with 2.8 or 7.4% organic matter contents (Soils 1 and 2, respectively) were amended with 14C-labeled 2,4-dichlorophenol (2,4-DCP) and incubated with a laccase from Trametes villosa (free or immobilized on montmorillonite). 2,4-DCP was either transformed to methanol-soluble polymeric products (11-32%) or covalently bound to soil organic matter (53-85%); unaltered 2,4-DCP could be recovered from soil by methanol extraction (0-38%) at the completion of a 14-d incubation period. In Soil 1, both free and immobilized laccase removed 100% of 2,4-DCP without regard for moisture conditions. In Soil 2, immobilized laccase removed more 2,4-DCP (about 95%, regardless of moisture conditions) than free enzyme (55, 75, and 90% at 30, 55, and 100% of maximum water-holding capacity, respectively). Binding of 2,4-DCP in the humin fraction was nearly the same for free and immobilized laccase. More 2,4-DCP, however, was bound to humic and fulvic acids in the presence of immobilized laccase than in the presence of free laccase. In general, immobilized laccase performed better than free laccase. However, for practical applications, the higher activity of immobilized laccase is offset by a 23% loss in enzyme activity during immobilization, which approximates the 30% increase in free laccase needed to achieve the same level of remediation. Furthermore, immobilized laccase is more costly than free T. villosa laccase.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans from food salt samples processed by heat treatment in Korea

Eight samples of processed food salt collected from five plants in Korea were analyzed for 2,3,7,8-substituted polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) using liquid-liquid extraction, clean-up procedures, and high resolution gas chromatography-high resolution mass spectrometry. The study included the analyses of two kinds of salt product sample: bamboo-salt and parched salt. The levels of toxic PCDD/Fs found in the salt product samples were extremely low: the results revealed TEQ levels ranging between the sub pg TEQ/g and sub fg TEQ/g. The differences in the TEQ values of toxic PCDD/F were observed between the salt product samples, which were treated with different frequency of baking using four different fuels (firewood, pine wood, pine resin, and indirect heating by gas) at temperatures from 300 to 2000 degrees C. In bamboo-salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.57-66 pg/g and 5.7x10(-5)-0.64 pg TEQ/g, respectively. PCDD/Fs levels in bamboo-salts baked by firewood were found to be higher than those baked by pinewood or pine resin. In parched salt samples, the concentrations and TEQ values of toxic PCDD/Fs ranged between 0.97-3.7 pg/g and 0.0097-0.017 pg TEQ/g, respectively. The data was discussed regarding the concentration and the distribution pattern of congeners.     

Hydrology, suspended sediment dynamics and nutrient loading in Lake Takkobu, a degrading lake ecosystem in Kushiro Mire, northern Japan

Suspended sediment and nutrient loadings from agricultural watersheds have lead to habitat degradation in Lake Takkobu. To examine their relationships with land-use activities, we monitored sediment, nutrient and water discharges into the lake for a 1-year sampling period. The Takkobu River contributed the largest portion of the annual water discharge into the lake, compared with the other tributaries. During dry conditions, lake water flowed into the Kushiro River, and conversely during flooding, Kushiro River water flowed into the lake. Inflows from the Kushiro River had a high proportion of inorganic matter, with high concentrations of total nitrogen and total phosphorus, attributed to agricultural land-use development and stream channelization practiced since the 1960s in the Kushiro Mire. Nutrient loadings from these two rivers were significantly higher during flooding than in dry conditions. However, there was no clear correlation between river discharge and nutrient concentrations. Since land-use activities in the Kushiro River and Takkobu River watersheds were concentrated near rivers, nutrients easily entered the drainage system under low flow conditions. In contrast, water discharged from small, forest-dominated watersheds contained a low proportion of inorganic matter, and low nutrient concentrations. The suspended sediment delivered to the lake during the sample period was estimated as approximately 607 tons, while the total nitrogen and total phosphorus inflows were about 10,466 and 1,433 kg, respectively. Suspended sediment input into the lake was 65%, and total nitrogen and total phosphorus were 40% and 48%, respectively, being delivered by the Kushiro River.