Polycyclic aromatic hydrocarbons in air on small spatial and temporal scales – II. Mass size distributions and gas-particle partitioning

Polycyclic aromatic hydrocarbons (PAHs) were measured together with inorganic air pollutants at two urban sites and one rural background site in the Banja Luka area, Bosnia and Hercegovina, during 72 h in July 2008 using a high time resolution (5 samples per day) with the aim to study gas-particle partitioning, aerosol mass size distributions and to explore the potential of a higher time resolution (4 h-sampling).In the particulate phase the mass median diameters of the PAHs were found almost exclusively in the accumulation mode (0.1–1.0 μm of size). These were larger for semivolatile PAHs than for non-volatile PAHs. Gas-particle partitioning of semivolatile PAHs was strongly influenced by temperature. The results suggest that the Junge–Pankow model is inadequate to explain the inter-species variation and another process must be significant for phase partitioning which is less temperature sensitive than adsorption. Care should be taken when interpreting slopes m of plots of the type log K_p = m log p_L⁰ + b based on 24 h means, as these are found sensitive to the time averaging, i.e. tend to be higher than when based on 12 h-mean samples.     

Effects of uncontrolled particulate matter release on precipitation under warfare conditions

This study has shown theoretical, observed and experimental evidence of pollutants released, transported and deposited during the Kosovo conflict in 1999 and their effects on precipitation in Serbia. The greatest bombardment of the chemical industry, oil refineries and fuel storage in Serbia which occurred during April, resulted in releases of many hazardous, toxic and cancerogenic substances. The number of April's days with precipitation greater or equal to 0.1 mm in 1999 are compared to those in the period from 1961 to 1990 registered at thirty meteorological stations in Serbia and especially at the Belgrade-Observatory station in the period from 1888 to 1995. The maximums of days with precipitation greater or equal to 0.1 mm were at the wider Belgrade area and at the central and southwestern parts of Serbia during April 1999. This is confirmed by using the Eta trajectory analysis.     

The toxicity of composted sediments from Mediterranean ports evaluated by several bioassays

This work investigates the ecotoxicological evaluation of contaminated dredged sediments from French Mediterranean navy harbour (A), commercial port (B) and two composite specimens (C) and (D) coming from the mixture of A and B with other port sediments. The toxicity of elutriates from these sediments is estimated using embryo-toxicity test, Microtox® solid phase test, LuminoTox, phytotoxicity tests and genotoxicity test. Bioassay responses are not clearly correlated with chemical contamination in the whole sediment and vary as a function of tested organisms. The highest contaminated samples (A and C) are almost always more toxic than the less contaminated samples (B and D). Among composite sediments, the mixture effect with other sediments is not efficient to decrease toxicity in sample C, suggesting that other parameters influence toxicity level such as particle size or organic matter content. These parameters should be taken into consideration in order to improve the efficiency of the mixture process and produce composite sediments with low toxicity.     

Accumulation of organochlorine contaminants in loggerhead sea turtles, Caretta caretta, from the eastern Adriatic Sea

We analyzed 15 polychlorinated biphenyls (PCBs) and five organochlorine pesticides (OCPs) in fat tissue of 27 loggerhead sea turtles (Caretta caretta) from eastern Adriatic Sea with the curved carapace length ranging from 25.0 to 84.5 cm. The PCB profile was dominated by hexa- and hepta-chlorinated congeners, with PCB-153 (median: 114.9 ng g⁻¹ wet mass), PCB-138 (80.0 ng g⁻¹ w.m.), and PCB-180 (26.7 ng g⁻¹ w.m.) detected with the highest levels. Toxic mono-ortho congeners PCB-118, PCB-105 and PCB-180 with dioxin-like toxicity were found in >70% samples. 4,4′-DDE (81.0 ng g⁻¹ w.m.) prevailed the OCP signature, accounting for 80% of the total DDTs. A significant increasing trend in accumulation with size was found for PCB-52 (r_s = 0.512, p < 0.01) and PCB-114 (r_s = 0.421, p < 0.05). Comparison of our results with organochlorine contaminant (OC) pattern in some prey taxa suggest that contamination occurs primarily through the food web, with biomagnification factors of 0.14-6.99 which were positively correlated with the octanol-water partition coefficient (log K_ow; p < 0.05). This study, based upon a fairly large sample size collected mostly from incidentally captured animals over a short time period (June 2001-November 2002), present a temporal snapshot of OC contamination in wild, free-ranging loggerheads from Adriatic feeding grounds and provide a baseline for monitoring the regional OC trends in this endangered species.     

Determination of O3, NO2, SO2, CO and PM10 measured in Belgrade urban area

O(3), NO(2), SO(2), CO and PM(10) concentrations, simultaneously determined for the first time in Belgrade urban area in the autumnal period of 2005, are presented. The obtained results display similar behaviour of SO(2), NO(2), CO, PM(10) opposite from that of O(3). The weekend effect was also investigated showing diminution of average daily concentrations of SO(2), NO(2), PM(10) and CO for 72, 40, 37 and 42% respectively, and increase of the average daily concentration of O(3) for 56%. Influence of meteorological conditions on observed concentration levels was studied, too. The observed influence of wind speed on the O(3) nightly concentration levels was analyzed pointing to the phenomena of O(3) transport during episodic measurements. To make an identification of possible pollution sources and analyse the influence of meteorological parameters on pollution levels, air back trajectories for high level concentrations episodes were calculated and analysed. A multivariate receptor modelling (Principal Component Analysis, Cluster Analysis) has been applied to a set of data in order to determine the contribution of different sources. It was found that the main principal components, extracted from the air pollution data, were related to gasoline combustion, oil combustion and ozone transport.     

Development planning in Mexico: Case study of an oil-rich economy

The authors identify problems of political, economic and social development in Mexico, which has now become a net oil exporter. Aspects of Mexican society are analysed - possession of resources, population growth, agricultural and industrial sectors of the economy and development policy. The political and economic components of social change and policy limitations are considered. It is clear that the severity of Mexico's development problems present serious issues for the current administration.     

Influence of the organic complex concentration on adsorption of herbicide in organic modified montmorillonite

This study was undertaken to determine the impact of the organic complex concentration on the adsorption of herbicide (acetochlor) at the surface of the organic modified montmorillonite. In this work, natural montmorillonite from Bogovina (Boljevac municipality, Serbia) was used for organic modification. Cation-exchange capacity of this montmorillonite was determined using a methylene blue method (86 mmol/100 g of clay). Montmorillonite has been modified first with NaCl and then with hexadecyltrimethylammonium bromide (HDTMA-bromide) organic complex. Saturation of cation exchange capacity (CEC) was 50%, 100%, and 150%. Changes in the properties of the inorganic and organic montmorillonite have been examined using the X-ray diffraction, Fourier transform infrared spectroscopy, and batch equilibrium method. Montmorillonite modified with HDTMA-bromide demonstrated higher uptake of the herbicide, compared to the inorganic montmorillonite. Comparing the values Freundlich coefficients in batch equilibrium method, it can be seen that the adsorption of acetochlor decreased in the series: 0.5 CEC HM > 1 CEC HM > 1.5 CEC HM > NaM.     

Electrochemical inactivation of cyanobacteria and microcystin degradation using a boron-doped diamond anode——A potential tool for cyanobacterial bloom control

Cyanobacterial blooms are global phenomena that can occur in calm and nutrient-rich(eutrophic) fresh and marine waters. Human exposure to cyanobacteria and their biologically active products is possible during water sports and various water activities, or by ingestion of contaminated water. Although the vast majority of harmful cyanobacterial products are confined to the interior of the cells, these are eventually released into the surrounding water following natural or artificially induced cell death. Electrochemical oxidation has been used here to damage cyanobacteria to halt their proliferation, and for microcystin degradation under in-vitro conditions. Partially spent Jaworski growth medium with no addition of supporting electrolytes was used. Electrochemical treatment resulted in the cyanobacterial loss of cell-buoyancy regulation, cell proliferation arrest, and eventual cell death. Microcystin degradation was studied separately in two basic modes of treatment: batch-wise flow, and constant flow, for electrolytic-cell exposure. Batch-wise exposure simulates treatment under environmental conditions, while constant flow is more appropriate for the study of boron-doped diamond electrode efficacy under laboratory conditions. The effectiveness of microcystin degradation was established using high-performance liquid chromatography–photodiode array detector analysis, while the biological activities of the products were estimated using a colorimetric protein phosphatase-1 inhibition assay. The results indicate potential for the application of electro-oxidation methods for the control of bloom events by taking advantage of specific intrinsic ecological characteristics of bloom-forming cyanobacteria. The applicability of the use of boron-doped diamond electrodes in remediation of water exposed to cyanobacteria bloom events is discussed.     

Ecological Engineering Practices for the Reduction of Excess Nitrogen in Human-Influenced Landscapes: A Guide for Watershed Managers

Excess nitrogen (N) in freshwater systems, estuaries, and coastal areas has well-documented deleterious effects on ecosystems. Ecological engineering practices (EEPs) may be effective at decreasing nonpoint source N leaching to surface and groundwater. However, few studies have synthesized current knowledge about the functioning principles, performance, and cost of common EEPs used to mitigate N pollution at the watershed scale. Our review describes seven EEPs known to decrease N to help watershed managers select the most effective techniques from among the following approaches: advanced-treatment septic systems, low-impact development (LID) structures, permeable reactive barriers, treatment wetlands, riparian buffers, artificial lakes and reservoirs, and stream restoration. Our results show a broad range of N-removal effectiveness but suggest that all techniques could be optimized for N removal by promoting and sustaining conditions conducive to biological transformations (e.g., denitrification). Generally, N-removal efficiency is particularly affected by hydraulic residence time, organic carbon availability, and establishment of anaerobic conditions. There remains a critical need for systematic empirical studies documenting N-removal efficiency among EEPs and potential environmental and economic tradeoffs associated with the widespread use of these techniques. Under current trajectories of N inputs, land use, and climate change, ecological engineering alone may be insufficient to manage N in many watersheds, suggesting that N-pollution source prevention remains a critical need. Improved understanding of N-removal effectiveness and modeling efforts will be critical in building decision support tools to help guide the selection and application of best EEPs for N management.