Pentachlorotoluene and pentabromotoluene: results of a subacute and a subchronic toxicity study in the rat

Pentachlorotoluene (PCT) and pentabromotoluene (PBT) are environmental contaminants detected in the Great Lakes ecosystem. In view of the paucity of toxicity data and the potential for human exposure, a subacute (28 day) and a subchronic (91 day) study were conducted in the rat. In the subacute study, groups of 10 male and 10 female rats were fed the diet containing PCT or PBT at 0, 0.5, 5.0, 50 or 500 ppm for 28-days. In the subchronic study, the group size was increased to 15, the dose levels were 0, 0.05, 0.5, 5.0, 50 and 500 ppm in the diet and the exposure period was 91 days. Growth rate and food consumption were not affected by exposure to either chemical in the subacute and subchronic study. Clinical observations revealed no abnormalities. Decreased hemoglobin was observed in female rats fed 5.0 ppm PCT and higher levels in the subacute (28 day) study. In the same study the hematocrit value and erythrocyte numbers of females fed 5.0 or 500 ppm PCT diets were significantly lower than the control. In both subacute and subchronic studies mild dose-dependent histopathological changes were observed in the thyroid, liver and kidney of rats fed PCT and PBT diets. In general male rats were more susceptible than females to the treatment of PCT and PBT. Based on these data, it was concluded that the no observable adverse effect level for PCT was 50 ppm in the diet (3.5 mg/kg b.w./day) and that of PBT was 5.0 ppm (0.35 mg/kg b.w./day).     

Effects of two organophosphorus insecticides on some biochemical constituents in the nervous system and liver of rabbits

Male Baladi rabbits were acutely and sub-chronically intoxicated with cyanofenphos and profenophos. The levels of cholesterol, triglycerides, B-lipoproteins and total proteins were determined in the serum, brain, spinal cord and sciatic nerve of rabbits. Moreover, the activities of alkaline phosphatase, acid phosphatase and glutamic-pyruvic transaminase were determined in the liver of the animals. The whole studies revealed that the biochemical constituents were highly affected by the tested insecticides. Also, the liver function suffered from adverse effects of the tested insecticides.     

Effects of calcium hydroxide and calcium chloride addition to bentonite in iron ore pelletization.

Pyrite ash is created as waste from the roasting of pyrite ores during the production of sulphuric acid. These processes generate great amounts of pyrite ash waste that is generally land filled. This creates serious environmental pollution due to the release of acids and toxic substances. Pyrite ash waste can be utilized in the iron production industry as a blast furnace feed to process this waste and prevent environmental pollution. The essential parameters affecting the pelletization process of pyrite ash were studied using bentonite as a binder. Experiments were then carried out using bentonite and a mixture of bentonite with calcium hydroxide and calcium chloride in order to make the bentonite more effective. The metallurgical properties of pyrite ash, bentonite, calcium hydroxide, calcium chloride, a mixture of these and sintered pellets were studied using X-ray analysis. The crushing strength tests were carried out to investigate the strength of pyrite ash waste pellets. The results of these analyses showed that pyrite ash can be agglomerated to pellets and used in the iron production industry as a blast furnace feed. The crushing strength of the pellets containing calcium hydroxide and calcium chloride in addition to bentonite was better than the strength of pellets prepared using only bentonite binder.     

Effects of equipment loadings on geosynthetic-lined slope behaviour.

When combined in the lining and covering of waste-containment facilities, soil and geosynthetic components protect the environment by acting as a hydraulic barrier. Equipment loading may significantly increase the tensile stress induced in geosynthetic components, leading to a potential stability problem. Large equipment loadings may also result in a localized circular slip surface during construction operations. New analytical method based on discrete element modelling is proposed for estimating the distribution of tensile force developed in the individual geosynthetic components of the lining system and for evaluating the safety factor of slope failure due to equipment loading. The analytical results of an example are presented to demonstrate the applicability of the analytical method for the lining system of a waste landfill. The analyses of the example show that equipment loading provide a substantial increase in the tensile forces of the geosynthetic components of a lining system and that the possibility of shallow failure due to equipment loading increases as the slope becomes steeper. This method is a useful tool for analysing the lining system of waste landfills with complex lining components.     

Design and validation of a practical index for trauma assessment

In the past 20 years a variety of indices have been suggested for measuring the severity of trauma, however none of them meets the requirement of being a simple and objective instrument that can be utilized efficiently by lay persons and providers of health services without previous experience in triaging. A new system has been proposed which meets this requirement and which has been validated with 197 injured persons at the emergency ward of the Valle University Hospital in Call, Colombia. The instrument showed a high level of concordance with the conventional triaging method and classifies victims into four categories: critical with recovery unlikely, critical but recoverable, moderately serious, and ambulatory. There is discussion on the reliability of this instrument and it is recommended that it be validated with victims from larger disasters. Regardless, it has the advantage of being specific and free of the subjectivity that characterizes other indices.     

Temperature and metabolic rate in sedentary fish from the Antarctic,North Sea and Indo-West Pacific Ocean

Resting metabolic rate was measured in demersal stages of the teleostNotothenia neglecta Nybelin from the South Orkney Islands, Antarctica, from 1985 to 1987. The relationship between and body mass (Mb) conformed to the general relationship , wherea is a proportionality constant andb is the scaling exponent. (mg O₂ h^–1) was found to scale toMb ^{(0.82±0.011)} in the summer (November to April, 1.6 to 1 850 g,n=56) and toMb ^{(0.76±0.013)} in the winter (May to October, 0.9 to 1 850 g,n=57) (values ofb are means ± SD). Although the scaling exponents were significantly different (P<0.01), was similar in the juvenile stages of summer- and winter-caught fish matched for body mass. The effects of activity on oxygen consumption was studied using a Brett respirometer. Adult stages had a factorial aerobic scope for activity of 5.7, which is similar to that reported for demersal fish from temperate latitudes. The effects of temperature on resting metabolism was investigated in fish with similar sedentary lifestyles from the North Sea (Agonus cataphractus andMyoxocephalus scorpius) and the Indo-West Pacific (Paracirrhites forsteri, P. arcatus, Neocirrhites armatus andExallias brevis). Extrapolated values of for the tropical species approached zero at 5 to 10°C. For a standard 50 g fish, for the tropical species at 25°C was in the range 3.4 to 4.4 mg O₂ h^–1, compared with 1.3 mg O₂ h^–1 forNotothenia neglecta at its acclimation temperature. Thus, the maximum metabolic rate of sedentary tropical species at 24°C is likely to be 2 to 4 times higher than inN. neglecta at 0°C. This suggests that the energy available for sustained activity is significantly lower in cold- than in warm-water fish.     

Heavy metals in the SPM of air in the environment surrounding a ferro-alloy industrial plant in India

Prices for ferro-alloys have hardened due to the closure of plants in developed countries on account of increasingly stringent pollution control legislation, resulting in a higher cost of production. A ferro-alloy industry with a capacity of 80000 MT per annum was selected to study the nature of pollution. Because of the objectionable nature of polluting air in and around the plant it was located in a rural area where there was no other industry. The area was agriculturally active and there was no effective control system for this plant.The quality of ambient air around the plant site is discussed in this paper along with the meteorological conditions. The maximum concentration of suspended particulate matter (SPM) was 768 µg/NM³ downwind of the plant, minimum 184 µg/NM³, and the average was more than 446 µg/NM³. The presence of heavy metals, viz. Fe, Mn, Cr and Pb, was also assessed. The concentration of Fe was 50 µg/NM³ downwind and 10 µg/NM³ upwind. The concentration of other metals followed a similar trend.