Chemical and mineralogical evaluation of slag products derived from the pyrolysis/melting treatment of MSW

This paper provides the results of studies on the characteristics of novel material derived from pyrolysis/melting treatment of municipal solid waste in Japan. Slag products from pyrolysis/melting plants were sampled for the purpose of detailed phase analysis and characterization of heavy metal-containing phases using optical microscopy, electron probe microanalysis (EPMA), XRF and XRD. The study revealed that the slag material contains glass (over 95%), oxide and silicate minerals (spinel, melilite, pseudowollastonite), as well as individual metallic inclusions as the major constituents. A distinct chemical diversity was discovered in the interstitial glass in terms of silica content defined as low and high silica glass end members. Elevated concentrations of Zn, Cr, Cu, Pb and Ba were recorded in the bulk composition. Cu, Pb and Ba behave as incompatible elements since they have been markedly characterized as part of polymetallic alloys and insignificantly sulfides in the form of spherical metallic inclusions associated with tracer amounts of other elements such as Sb, Sn, Ni, Zn, Al, P and Si. In contrast, an appreciable amount of Zn is retained by zinc-rich end members of spinel and partially by melilite and silica glass. Chromium exhibits similar behavior, and is considerably held by Cr-rich spinel. The intense incorporation of Zn and Cr into spinel indicates the very effective enrichment of these two elements into phases more environmentally resistant than glass. There was no evidence, however, that Cu and Pb enter into the structure of the crystalline silicates or oxides that may lead to their easier leachability upon exposure to the environment.     

Genetic variation and clonal structure in the scleractinian coral Pocillopora damicornis in the Ryukyu Archipelago, southern Japan

Samples of the scleractinian coral Pocillopora damicornis were collected from six sites located around four islands in the Ryukyu Archipelago, southern Japan, and subjected to allozyme electrophoresis. Seven polymorphic loci were examined for their allelic patterns. The ratio of observed to expected genotypic diversity (0.30 < G _o :G _e  < 0.64), the ratio of the observed number of genotypes to the number of individuals (0.47 < N _g :N _i  < 0.75), and deviations from Hardy–Weinberg equilibrium indicated that asexual reproduction plays a major role in the maintenance of established populations. However, populations were not completely dominated by a single or a few clones, and most clones were represented by only a few individual samples. The high frequency of typhoons in the region suggests that, in P. damicornis, fragmentation caused through occasional exposure to powerful waves is a major mode of asexual reproduction, but asexual production of planulae may also be contributing to the maintenance of populations. A significant genetic differentiation (F ST) was found between the six populations examined (0.027 < F ST < 0.092, average F ST = 0.056). The moderate gene flow is discussed according to characteristics of the larval stage of the species, and to circulation patterns in the region. Received: 7 August 1998 / Accepted: 18 May 1999     

Quantitative assessment of the Japanese “local production for local consumption” movement: a case study of growth of vegetables in the Osaka city region

This study aimed to assess Japan’s recent “local production for local consumption” (LPLC) movement, with a special focus on vegetables in the Osaka city region of central Japan. After collecting statistics and spatial data, we conducted a multi-scale analysis of vegetable production and consumption along with the associated energy consumption, using geographical information system software at three spatial scales along the vegetable flow paths: national, regional, and local. Vegetables consumed in the Osaka city region came from prefectures throughout Japan, and we mapped the foodshed within this region at 1-km spatial resolution, as well as the distribution of farmland, farmers’ and other markets. We also conducted a scenario analysis for reduced energy consumption through organic farming and the utilization of abandoned farmland near a city to replace food imports from distant areas. We found that the large majority of vegetables consumed in the Osaka city region currently come from remote prefectures, and that this is associated with a high level of energy consumption. Inside the Osaka city region, peri-urban vegetable farming contributes to regional vegetable provision, resulting in an approximately 70 % production/consumption ratio within an 80-km radius of the urban center; if all of the area of abandoned farmland were restored to production, this ratio would increase to approximately 75 %. Organic farming activities that bring together farmers and urbanites are emerging in many parts of the study area, contributing to increased LPLC. Scenario analysis suggested that a decrease of more than 1 × 10⁶ GJ of energy inputs could be achieved through wider adoption of local organic farming for local consumption and complete utilization of abandoned farmland in the Osaka city region.     

Assessment of the sources of suspended particulate matter aerosol using US EPA PMF 3.0

The main purpose of this paper was to carry out a source apportionment of suspended particulate matter (SPM) samples using positive matrix factorization procedure. The central and local Government of Japan introduced strict emission regulations in 2002/10 and 2003/10, respectively, in curbing SPM pollution from major metropolitans. This paper also highlighted the impact of the measures taken by the central and local Government of Japan on the reduction of SPM and the contributions of sources. SPM samples were collected for 6 years starting from 1999 to 2005 at two sites, i.e., site A (urban) and site B (suburban) of Yokohama, Japan. Microwave digestion and inductively coupled plasma-mass spectroscopy (ICP-MS) were employed to measure Mg, Al, Ca, V, Cr, Mn, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Ag, Cd, Cs, Ba, Pb and Bi, while water soluble ions (Na⁺, NH₄  ⁺_{4}^{\ \,+}, K⁺, Ca^2 +, Mg^2 +, Cl⁻, NO₃  ^-_{3}^{\ \,-} and SO₄  ^2-)_{4}^{\ \,2-}) as well as carbonaceous mass (EC and OC) were analyzed using ion chromatograph and CHN analyzer, respectively. The sources identified at two sites were automobile, soil dust, marine aerosol, mixed sources, and secondarily formed aerosol. Also, source quantification was performed. Automobile and soil dust were striking contributors at site A. Automobile and soil dust of SPM aerosol might be produced from local origin at current study areas. Besides, Asian dust had an impact on high concentrations of SPM aerosol in some certain period of the year due to the outflows of East Asian emission. In contrast, secondary aerosol in the form of sulfate and ammonium as well as mixed sources (coal, long-transported Cs, and other unknown sources) were remarkable at site B. Stationary/industrial combustion has apparently more impact on the release of SPM components at site B than A. Automobile regulations in 2002 and 2003, respectively, resulted in reduction of SPM by 28% for site A and 16% for site B. There was also net reduction of automobile contribution at both sites due to the above measures being implemented.     

Hydrothermal treatment of MSWI bottom ash forming acid-resistant material

To recycle municipal solid waste incinerator (MSWI) bottom ash, synthesis of hydrothermal minerals from bottom ash was performed to stabilize heavy metals. MSWI bottom ash was mixed with SiO(2), Al(OH)(3), and Mg(OH)(2) so its chemical composition was similar to that of hydrothermal clay minerals. These solid specimens were mixed with water at a liquid/solid ratio of 5. The reaction temperature was 200 degrees C, and reactions were performed for 24-240h. Generation of kaolinite/smectite mixed-layer clay mineral was found in the samples after the reaction of the mixture of bottom ash, SiO(2), and Mg(OH)(2). Calcium silicate hydrate minerals such as tobermorite and xonotlite were also generated. X-ray powder diffraction suggested the presence of amorphous materials. Leaching tests at various pHs revealed that the concentration of heavy metals in the leachates from MSWI bottom ash hydrothermally treated with SiO(2) and Mg(OH)(2) was lower than that in leachates from non-treated bottom ash, especially under acid conditions. Hydrothermal treatment with modification of chemical composition may have potential for the recycling of MSWI bottom ash.     

Effects of dietary habits and CYP1A1 polymorphisms on blood dioxin concentrations in Japanese men

The major source of dioxin impurities in Japan in the past was agrochemical formulations; more recently, it has been exhaust from waste incinerators. To examine the environmental and genetic factors that influence blood dioxin concentration, we investigated the relationship among dioxin concentrations, dietary habits and cytochorome P450 1A1 (CYP1A1) polymorphisms (MspI type and Ile-Val type) in Japanese fishermen and farmers, including also a group of office workers as controls. The mean dioxin concentrations in the fishermen, the farmers and the controls were 161369, 79079 and 100500 pg/g fat, respectively. The elevated dioxin concentration with polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar-PCBs found in the fishermen may be due to the frequent consumption of fish; no such relationship was found both in the farmers and the controls. We found that the concentrations of congeners found as impurities in certain chemicals such as those previously used in agriculture showed no significant differences among the three groups; we consider it unlikely that the farmers would be directly exposed to dioxins from such chemicals. Thus, it is probable that the primary route of dioxin exposure in the Japanese population is through the food chain via fish consumption, regardless of occupation. No meaningful relationship between blood dioxin concentration and CYP1A1 polymorphisms was found in this study, although there was a significant difference between the concentration of total non-ortho-PCBs in genotypes A and B. Further studies on more subjects, including those of genotype C, are needed to confirm the relationship between blood dioxin concentrations and MspI polymorphisms.     

Development of the echinothurid sea urchin Asthenosoma ijimai

Development of an echinothurid sea urchin is described for the first time; eggs of Asthenosoma ijimai (Yoshiwara) have been fertilized in the laboratory, and development has been followed light-microscopically up to the early juvenile stage. The eggs, which are orange and float, are 1.2 mm in diameter, by far the largest echinoid eggs on record. The embryos, larvae and early juveniles are lecithotrophic, and no exogenous food is needed for development. The embryonic stages include a remarkable biscuit-shaped late blastula, which has never been described for any echinoid before. The larva, with its para-arms unsupported by skeletal ossicles, is unlike the echinoid prism or pluteus and more resembles the early bipinnaria or early auricularia of asteroids and holothurians, respectively. All stages through late larvae float just beneath the surface until settlement occurs during the third and fourth weeks at 20°C. Metamorphosis from late larva to juvenile is gradual and no part of the larval body appears to be cast off.This paper is dedicated to Professor Juro Ishida on the occasion of his seventieth birthday.