Study of cyanide removal from contaminated water using zinc peroxide nanomaterial

The present study highlights the potential application of zinc peroxide(ZnO_2)nanomaterial as an efficient material for the decontamination of cyanide from contaminated water. A process patent for ZnO_2 synthesis has been granted in United States of America(US Patent number 8,715,612; May 2014),South Africa,Bangladesh,and India. The ZnO_2 nanomaterial was capped with polyvinylpyrrolidone(PVP)to control the particle size. The PVP capped ZnO_2nanomaterial(PVP-ZnO_2)before and after adsorption of cyanide was characterized by scanning electron microscope,transmission electron microscope,X-ray diffractometer,Fourier transform infrared spectroscopy and time of flight-secondary ion mass spectrometry. The remaining concentration of cyanide after adsorption by PVP-ZnO_2 was determined using ion chromatograph. The adsorption of cyanide over PVP-ZnO_2 was also studied as a function of p H,adsorbent dose,time and concentration of cyanide. The maximum removal of cyanide was observed in p H range 5.8–7.8 within 15 min. The adsorption data was fitted to Langmuir and Fruendlich isotherm and it has been observed that data follows both the isotherms and also follows second order kinetics.     

Consumption of unsafe food in the adjacent area of Hazaribag tannery campus and Buriganga River embankments of Bangladesh: heavy metal contamination

The concentrations of Cr, Cd, Pb, Hg, and As in water, poultry meat, fish, vegetables, and rice plants obtained from the area adjacent to the Hazaribag tannery campus, Dhaka, Bangladesh, were estimated and compared with permissible levels established by the WHO and FAO and levels reported previously by other authors. The metal contents were in the following order according to the concentration in contaminated irrigation water: Cr?>?Pb?>?As?>?Hg?>?Cd. Mean concentrations of Cr, Pb, Hg, and As in irrigated water were above the permissible levels, whereas the results were below the permissible levels for Cd. The metal concentrations in poultry meat, fish, rice, and vegetables were in the following orders: Pb?>?Cr?>?Cd?>?Hg?>?As, Pb?>?Cr?>?Cd?>?As?>?Hg, Pb?>?As, and Cr?>?Pb?>?Cd?>?As?>?Hg, respectively. The mean concentrations of metals in poultry meat, fish, rice, and vegetables were much higher than the permissible levels. The trends of weekly intake of heavy metals (WIMs) from poultry meat, fish, rice, and vegetables were as follows: Pb?>?Cr?>?Cd?>?Hg?>?As, Pb?>?Cr?>?Cd?>?As?>?Hg, Pb?>?As, and Cr?>?Pb?>?Cd?>?As?>?Hg, respectively. WIMs for all the metals were lower than the provisional maximum weekly intake recommended by WHO/FAO and USNAS.     

Characterization of aerosols from biomass burning--a case study from Mizoram (Northeast), India

Physical and optical properties of biomass burning aerosols in Northeastern region, India analyzed based on measurements made during February 2002. Large spatial extent of Northeastern Region moist tropical to moist sub-tropical forests in India have high frequency of burning in annual dry seasons. Characterization of resultant trace gases and aerosols from biomass burning is important for the atmospheric radiative process. Aerosol optical depth (AOD) observed to be high during burning period compared to pre- and post-burning days. Peak period of biomass burning is highly correlated with measured AOD and total columnar water vapor. Size distribution of aerosols showed bimodal size distribution during burning day and unimodal size distribution during pre- and post-burning days. Size distribution retrievals from biomass burning aerosols show dominance of accumulation mode particles. Weighted mean radius is high (0.22 microm) during burning period. Columnar content of aerosols observed to be high during burning period in addition to the drastic reduction of visibility. During the burning day Anderson sampler measurements showed dominance of accumulation mode particles. The diurnal averaged values of surface shortwave aerosol radiative forcing af biomass burning aerosols varies from -59 to -87 Wm(-2) on different days. Measured and modeled solar irradiances are also discussed in the paper.     

In-field variation in 2,4-D mineralization in relation to sorption and soil microbial communities

This study was undertaken to assess 2,4-D mineralization in an undulating cultivated field, along a sloping transect (458 m to 442 m above sea level), as a function of soil type, soil microbial communities and the sorption of 2,4-D to soil. The 2,4-D soil sorption coefficient (Kd) ranged from 1.81 to 4.28 L kg(-1), the 2,4-D first-order mineralization rate constant (k) ranged from 0.04 to 0.13 day(-1) and the total amount of 2,4-D mineralized at 130 days (M(130)) ranged from 24 to 39%. Both k and M(130) were significantly negatively associated (or correlated) with soil organic carbon content (SOC) and Kd. Both k and M(130) were significantly associated with two fatty-acid methyl esters (FAME), i17:1 and a18, but not with twenty-two other individual FAME. Imperfectly drained soils (Gleyed Dark Grey Chernozems) in lower-slopes showed significantly lesser 2,4-D mineralization relative to well-drained soils (Orthic Dark Grey Chernozems) in mid- and upper-slopes. Well-drained soils had a greater potential for 2,4-D mineralization because of greater abundance and diversity of the microbial community in these soils. However, the reduced 2,4-D mineralization in imperfectly drained soils was predominantly because of their greater SOC and increased 2,4-D sorption, limiting the bioavailability of 2,4-D for degradation. The wide range of 2,4-D sorption and mineralization in this undulating cultivated field is comparable in magnitude and extent to the variability of 2,4-D sorption and mineralization observed at a regional scale in Manitoba. As such, in-field variations in SOC and the abundance and diversity of microbial communities are determining factors that require greater attention in assessing the risk of movement of 2,4-D by runoff, eroded soil and leaching.     

Persistent organohalogen contaminants in plasma from groups of humans with different occupations in Bangladesh

The present study is aimed to assess persistent organic halogenated pollutants in humans living in Bangladesh. The results are compared to other similar studies in the region and globally. Human blood plasma were collected from groups of men and women with different occupations, i.e. being students, garment industry workers, employees at the Power Development Board (PDB), all groups in Dhaka, fishermen and fishermen wife's from Dhaka and another group from Barisal district. The plasma was analysed for hexachlorobenzene (HCB), the hexachlorocyclohexane isomers, alpha-HCH, beta-HCH, gamma-HCH and delta-HCH, the DDT group of chemicals, chlordane compounds, trans-chlordane, cis-chlordane, oxychlordane, trans-nonachlor, trans-heptachlorepoxide, methoxychlor and mirex. The most abundant contaminant, in all groups studied, p,p'-DDE is dominating, with p,p'-DDT/Sigma DDT ratios indicating recent and ongoing DDT exposure. Among the other pesticides analysed beta-HCH is the most abundant indicating the use of technical HCH products instead of Lindane (gamma-HCH). While the Sigma DDT is present in the low ppm range the beta-HCH is detected in up to approx. 400 ppb, lipid basis. The beta-HCH is most abundant in the groups of students. In contrast to the pesticides analysed very low concentrations of polychlorinated biphenyls (PCB) are present in all study groups, with e.g. CB-153 in the range of 5-30 ng g(-1) fat. The concentrations of the DDT group of chemical differ significantly between fishermen and fishermen's wives living and working in the Dhaka area versus those living and working in Barisal. Also, fishermen and their wives had significantly different concentrations of DDT compared to garment industry workers.     

Physiological and biochemical mechanisms of spermine-induced cadmium stress tolerance in mung bean (<Emphasis Type="Italic">Vigna radiata</Emphasis> L.) seedlings

The role of exogenous spermine (0.25 mM Spm, a type of polyamine (PA) in reducing Cd uptake and alleviating Cd toxicity (containing 1 and 1.5 mM CdCl₂ in the growing media) effects was studied in the mung bean (Vigna radiata L. cv. BARI Mung-2) plant. Exogenously applied Spm reduced Cd content, accumulation, and translocation in different plant parts. Increasing phytochelatin content, exogenous Spm reduced Cd accumulation and translocation. Spm application reduced the Cd-induced oxidative damage which was reflected from the reduction of H₂O₂ content, O₂ ^?– generation rate, lipoxygenase (LOX) activity, and lipid peroxidation level and also reflected from the reduction of spots of H₂O₂ and O₂ ^?– from mung bean leaves (compared to control treatment). Spm pretreatment increased non-enzymatic antioxidant contents (ascorbate, AsA, and glutathione, GSH) and activities of antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), glutathione S-transferase (GST), monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), and glutathione reductase (GR) which reduced oxidative stress. The cytotoxicity of methylglyoxal (MG) is also reduced by exogenous Spm because it enhanced glyoxalase system enzymes and components. Through osmoregulation, Spm maintained a better water status of Cd-affected mung bean seedlings. Spm prevented the chl damage and increased its content. Exogenous Spm also modulated the endogenous free PAs level which might have the roles in improving physiological processes including antioxidant capacity, osmoregulation, and Cd and MG detoxification capacity. The overall Spm-induced tolerance of mung bean seedlings to Cd toxicity was reflected through improved growth of mung bean seedlings.     

Chemical characteristics of trace metals in PM10 and their concentrated weighted trajectory analysis at Central Delhi, India

Trace metals associated with PM₁₀ aerosols and their variation during day and nighttime as well as during different seasons have been studied for the year 2012. PCA analysis suggested 5 PCs, which accounted for 86.8% cumulative variance. PC1 accounted for 30% with a significant loading of metals of anthropogenic origin, while PC2 showed 28% variance with the loading of metals of crustal origin. These trace metals showed seasonal distinct day and night time characteristics. The concentrations of Cu, Pb, and Cd were found to be higher during nighttime in all the seasons. Only Fe was observed with significantly higher mean concentrations during daytime of all seasons except monsoon. The highest mean values of Cu, Cd, Zn, and Pb during post-monsoon might be attributed to winds advection over the regions of waste/biomass burning and industrial activities in Punjab and Haryana regions. Furthermore, concentration weighted trajectory analysis suggested that metals of crustal origin were contributed by long-range transport while metals of anthropogenic and industrial activities were contributed by regional/local source regions.     

Environmental aspects of biofuels in road transportation

Energy is a vital and growing need for human activities such as transport, agriculture and industry. The transport and agriculture sectors are major consumers of fossil fuel. However, availability of fossil fuels is limited. The use of fossil fuels is of increasing environmental concerns because it produces toxic airborne particulates and greenhouse gases such as CO₂. The increasing industrialization and motorization of the world led to a steep rise for the demand of petroleum-based fuels. Hence, it is necessary to seek alternative fuels, which can be produced from resources available locally within the country such as alcohol, biodiesel and vegetable oils. Biodiesel is defined as the mono alkyl esters of vegetable oils or animal fats. Biodiesel is the best candidate for diesel fuels in the diesel engines. The advantage of biodiesel over gasoline and petroleum/diesel is its eco-friendly nature. This article reviews the production, characterization and current status of biofuels mainly biodiesel along with the environmental impacts of particulate matter, greenhouse gas emissions originated from biodiesel.     

Age at first marriage and its relation to fertility in Bangladesh

The 2007 Bangladesh Demographic and Health Survey(BDHS)data are exploited to examine the effects of socioeconomic and demographic factors on age at first marriage linkage to reproductive behavior of Bangladeshi women.The mean age at first marriage of women is found to be 15.48 years.Multivariate logistic regression technique shows that place of residence,religion,region,wealth index,education,and occupation are significantly important factors for determining age at first marriage.The relationship between marriage and fertility suggests that women who marry at a younger age produce more children than women who marry late.Findings of this study show that if the age at first marriage of adolescents is increased by 1 year,the age at first birth is postponed by 0.728 years.With the increase in age at first marriage,the fecundability of women sharply rises,whereas the proportion of temporary sterility decreases.Although there is a positive association between age at first marriage and age-specific marital fertility rates,the total parity per woman at the end of the reproductive period is expected to reduce by 0.196 for each 1-year delayed marriage.     

Greenhouse gas emissions from municipal solid waste management in Indian mega-cities: a case study of Chennai landfill sites

Municipal solid waste generation rate is over-riding the population growth rate in all mega-cities in India. Greenhouse gas emission inventory from landfills of Chennai has been generated by measuring the site specific emission factors in conjunction with relevant activity data as well as using the IPCC methodologies for CH4 inventory preparation. In Chennai, emission flux ranged from 1.0 to 23.5mg CH4m(-2)h(-1), 6 to 460microg N2Om(-2)h(-1) and 39 to 906mg CO2m(2)h(-1) at Kodungaiyur and 0.9 to 433mg CH4m(-2)h(-1), 2.7 to 1200microg N2Om(-2)h(-1) and 12.3 to 964.4mg CO2m(-2)h(-1) at Perungudi. CH4 emission estimates were found to be about 0.12Gg in Chennai from municipal solid waste management for the year 2000 which is lower than the value computed using IPCC, 1996 [IPCC, 1996. Report of the 12th session of the intergovernmental panel of climate change, Mexico City, 1996] methodologies.