Evaluation of seasonal variation and the optimization of reducing sugar extraction from Ulva prolifera biomass using thermochemical method

Environmental Science and Pollution Research - Green macroalgae comprise significant amount of structural carbohydrates for their conversion to liquid biofuels. However, it generally relies on...     

Risk assessment due to ingestion of natural radionuclides and heavy metals in the milk samples: a case study from a proposed uranium mining area, Jharkhand

Ingestion of radionuclides and heavy metals through drinking water and food intake represents one of the important pathways for long-term health considerations. Milk and milk products are main constituents of the daily diet. Radionuclides and heavy metals can be apprehended in the ecosystem of the East Singhbhum region which is known for its viable grades of uranium, copper and other minerals. For the risk assessment studies, samples of milk were collected from twelve villages around Bagjata mining area and analysed for U(nat), ²²⁶Ra, ²³⁰Th, ²¹⁰Po, Fe, Mn, Zn, Pb, Cu and Ni. Analysis of the results of the study reveals that the geometric mean of U(nat), ²²⁶Ra, ²³⁰Th and ²¹⁰Po was 0.021, 0.24, 0.23 and 1.08 Bq l^???1, respectively. The ingestion dose was calculated to be 12.34 ??SvY^???1 which is reflecting the natural background dose via the route of ingestion, and much below the 1 mSv limit set in the new ICRP recommendations. The excess lifetime cancer risk was estimated to be 1.72 × 10^???4 which is within the acceptable excess individual lifetime cancer risk value of 1 × 10^???4. The geometric mean of Fe, Mn, Zn, Cu and Ni was 4.91, 0.29, 4.77, 0.56 and 0.48 mgl^???1, respectively; whereas the daily intake was computed to be 0.44, 0.03, 0.43, 0.05 and 0.04 mg/day, respectively. Pb was not detected in any of the samples. The hazard quotient revealed that the intake of the heavy metals through the ingestion of milk does not pose any apparent threat to the local people as none of the HQ of the heavy metals exceeds the limit of 1.     

Effect of sodium arsenite on adrenocortical activity in immature female rats: evidence of dose dependent response

ｎｔｒｏｄｕｃｔｉｏｎＡｒｓｅｎｉｃ，ａｍｅｔａｌｌｏｉｄ，ｉｓａｎｏｎｅｓｓｅｎｔｉａｌｔｒａｃｅｅｌｅｍｅｎｔ，ｈａｓｂｅｅｎｃｌａｉｍｅｄｔｏｂｅｏｆｃｌｉｎｉｃａｌｂｅｎｅｆｉｔｉｎｔｈｅｔｒｅａｔｍｅｎｔｏｆｓｙｐｈｉｌｉｓ，ａｍｏｅｂｉａｓｉｓａｎｄｏｔｈｅｒｔｒｏｐｉｃａｌｄｉｓｅａｓｅｓ（Ｋｌａａｓｓｅｎ，１９９０；Ｋｏｗａｇｕｃｈｉ，１９８１）．Ｂｅｓｉｄｅｉｔｓｃｌｉｎｉｃａｌｉｍｐｏｒｔａｎｃｅ，ａｒｓｅｎｉｃｉｓｒｅｐｏｒｔｅｄｔｏｂｅａｎｉｍｐｏｒｔａｎｔｗａｔｅｒｐｏ…     

Influence of GSTM1 and GSTT1 genotypes and confounding factors on the frequency of sister chromatid exchange and micronucleus among road construction workers

In the present study, we have investigated the influence of polymorphism of GSTM1 and GSTT1 genes and confounding factors such as age, sex, exposure duration and consumption habits on cytogenetic biomarkers. Frequency of sister chromatid exchanges (SCEs), high frequency cell (HFC) and cytokinesis blocked micronuclei (CBMN) were evaluated in peripheral blood lymphocytes of 115 occupationally exposed road construction workers and 105 unexposed individuals. The distribution of null and positive genotypes of glutathione-S transferase gene was evaluated by multiplex PCR among control and exposed subjects. An increased frequency of CBMN (7.03 ± 2.08); SCE (6.95 ± 1.76) and HFC (6.28 ± 1.69) were found in exposed subjects when compared to referent (CBMN - 3.35 ± 1.10; SCE - 4.13 ± 1.30 and HFC - 3.98 ± 1.56). These results were found statistically significant at p < 0.05. When the effect of confounding factors on the frequency of studied biomarkers was evaluated, a strong positive interaction was found. The individuals having GSTM1 and GSTT1 null genotypes had higher frequency of CBMN, SCE and HFC. The association between GSTM1 and GSTT1 genotypes and studied biomarkers was found statistically significant at p < 0.05. Our findings suggest that individuals having null type of GST are more susceptible to cytogenetic damage by occupational exposure regardless of confounding factors. There is a significant effect of polymorphism of these genes on cytogenetic biomarkers which are considered as early effects of genotoxic carcinogens.     

A comprehensive review of the energy efficiency on nano coated fin and tube condenser

The condenser is a piece of equipment used to effectively transfer heat from water to the environment. The fin and tube condenser is the most commonly used in commercial applications. The improved performance of heat transfer in the fin and tube condenser is a significant area of study all over the world because optimizing the efficiency of heat transfer in the condenser will contribute to enhancing the effectiveness of system performance. The vapor deposition, plasma spray, and thermal spray techniques are being used, and it is determined that a heat transfer enhancing coating improves condenser performance. This review discusses the nanomaterial coating over the fin and tube condenser in detail. The various nanomaterial coatings with various propositions and coating methods had been discussed with the evidence of previous researchers. At a 50-degree inclination angle on the condensate plate, the condensate over the coating surface increases by more than 30%. The thermal properties of the working fluid are improved over the condenser, and the overall effectiveness of the condenser is increased by approximately 40% over the non-coated condenser. A 1% volumetric concentration of Nanoparticles in the coated material achieves a maximum efficiency increase of 78.7%.     

Biosorption kinetics of heavy metals by leaf biomass of Jatropha curcas in single and multi-metal system

Biosorption of Cu²⁺, Zn²⁺, and Cr⁶⁺ from aqueous solutions by leaf biomass of Jatropha curcas was investigated as a function of biomass concentration, initial metal ion concentration, contact time, and pH of the solution systematically. The aim of this study was to optimize biosorption process and find out a suitable kinetic model for the metal removal in single and multi-metal system. The experimental data were analyzed using two sorption kinetic models, viz., pseudo-first- and pseudo-second-order equations, to determine the best fit equation for the biosorption of metal ions Cu²⁺, Zn²⁺, and Cr⁶⁺ onto the leaf biomass of J. curcas in different metal systems. The experimental data fitted well the pseudo-second-order equation and provided the best correlation for the biosorption process. The findings of the present investigation revealed that J. curcas leaf biomass was an eco-friendly and cost-effective biosorbent for the removal of heavy metal ions from wastewater.     

Bio-mediated silver nanoparticle synthesis: mechanism and microbial inactivation

Even though plenty of literature is available on the biosynthesis of metal nanoparticles, there are serious lacunae on the mechanisms of their formation. In the present study, the mechanism of formation of mono-crystalline silver nanoparticles using a fruit extract of the ornamental tree Thevetia peruviana is emphasized, i.e. how the pH of the reaction mixture affected reaction kinetics and size of the nanoparticles. The facilitation of formation of Ag₂O at higher pH resulted in a faster rate of particle formation. The diameter of the bare particles at neutral pH determined by field emission scanning electron microscopy and the hydrodynamic diameter determined by dynamic light scattering were 53 and 104 nm, respectively. The silver nanoparticles exhibited good inactivation of Escherichia coli due to participation of free radicals as evidenced by electron spin resonance spectroscopy.     

Human health risk assessment due to dietary intake of heavy metals through rice in the mining areas of Singhbhum Copper Belt,India

Environmental Science and Pollution Research - The study was intended to investigate heavy metal contamination levels in the rice grown in the vicinity of the mining areas of Singhbhum Copper Belt,...