Potential of Eucalyptus globulus for the phytoremediation of metals in a Moroccan iron mine soil—a case study

Environmental Science and Pollution Research - The contamination left by abandoned mines demands sustainable mitigation measures. Hence, the aim of this study was to examine the phytoremediator...     

COVID-19 and beliefs about tobacco use: an online cross-sectional study in Iran

Environmental Science and Pollution Research - There is mixed evidence surrounding the relationship between tobacco use and COVID-19 infection/progression. The current study investigates beliefs...     

Activated carbon produced from waste coffee grounds for an effective removal of bisphenol-A in aqueous medium

Environmental Science and Pollution Research - Bisphenol-A is widely used chemical in industry and unfortunately often detected in natural waters. Considered as an emerging pollutant, bisphenol-A...     

Discrete-choice experiments valuing local environmental impacts of renewables: two approaches to a case study in Portugal

Despite the often mentioned environmental benefits associated with transition from fossil fuels to renewable energy sources, their use for electricity production has non-negligible negative environmental impacts. The most commonly mentioned in surveys concern different types of landscape impacts, impacts on the fauna and flora, and noise. These impacts differ by size and location of plants, and by source of energy, rendering the policy decision complex. In addition, there are other welfare issues to take into consideration, as positive and negative environmental impacts are not evenly distributed among population groups. This paper proposes to compare the welfare impacts of renewable energy sources controlling for the type of renewable as well as the specific environmental impact by source. To this end, two discrete-choice experiments are designed and applied to a national sample of the Portuguese population. In one case, only individual negative impacts of renewables are used, and in another case, the negative impacts interact with a specific source. Results show the robustness of discrete-choice experiments as a method to estimate the welfare change induced by the impacts of renewable energy sources. Overall, respondents are willing to pay to reduce the environmental impacts, thus making compensation for local impacts feasible. Moreover, the estimations reveal that respondents are significantly sensitive to the detrimental environmental effects of specific renewable energy sources, being willing to pay more to use these sources of energy relative to others.     

Contamination of soil and the medicinal plant <Emphasis Type="Italic">Phyllanthus niruri</Emphasis> Linn. with cadmium in ceramic industrial areas

Phyllanthus niruri is a plant that is used to prevent calcium oxalate crystallisation and to block the stone formation in urolithiasis. Contaminants in the environment can be readily taken up by medicinal plants due to their ability to absorb chemicals into their tissues. If contaminated plants are ingested, they have the potential to negatively affect human and environmental health. The aim of this study was to assess contamination in the soil and the medicinal plant P. niruri by cadmium (Cd) in ceramic industrial areas of Monte Carmelo, Brazil. Soil samples and plant samples (divided in root, shoot and leaves) were collected from a contaminated monitoring site and from a rural area (which was used as a reference site for comparative purposes). The Cd concentrations of the samples were analysed with an atomic absorption spectrometer. P. niruri was found to be sensitive to soil contamination by Cd that was attributed to ceramic industrial emissions. The results revealed that Cd bioaccumulation in the roots and shoots of P. niruri was associated with a significant increase (p?<?0.05) in the concentration of active lignan compounds (phyllanthin and hypophyllanthin) in the leaves. The identification of high concentrations of Cd and active lignan compounds suggests a risk of contamination of the site and the risk of a high dose of Cd to people exposed at the site.     

Validation of atmospheric aerosols parallel sampling in a multifold device

In this work, particulate matter was collected using an active sampling system consisting of a PM₁₀ (<10 μm) inlet coupled to a multifold device containing six channels, connected to a vacuum pump. Each channel was equipped with a filter holder fitted with adequately chosen filters. The system was fixed on a metallic structure, which was placed on the roof of the laboratory building, at the Faculty of Sciences, in Lisbon. Sampling took place under flow-controlled conditions. Aerosols were extracted from the filters with water, in defined conditions, and the water-soluble fraction was quantified by ion chromatography (IC) for the determination of inorganic anions (Cl^?, NO₃ ^? and SO₄ ^2?). Equivalent sampling through the various channels was validated. Validation was based on the metrological compatibility of the content results for the various filters. Ion masses are metrologically equivalent when their absolute difference is smaller than the respective expanded uncertainty. When this condition is verified, the studied multifold device produces equivalent samples.     

FIA-coupled spectrophotometric method for determination of Cr (VI) traces in natural waters: application of in-line dissolution of 1,5-diphenylcarbazide after heat treatment and activated alumina as adsorbent for preconcentration

This work proposes the quantification of Cr (VI) ions in natural waters in trace level, using activated alumina (Al₂O₃) as preconcentration support, controlled in-line dissolution of the solidified chromophore diphenylcarbazide after heat treatment and spectrophotometric detection. The manifold ensures high sensitivity of analytical response, good repeatability, and stability. In this work, optimization of experimental conditions of a flow injection system was chosen as the parameters for greater sensitivity and better selectivity. The selected optimized conditions were 0.30 mol L^?1 for H₂SO₄ concentration, system flow rate as 0.40 mL min^?1, sample injection volume of 192.50 μL, 2 min for preconcentration time, and 0.10 mol L^?1 for eluent concentration. The analytical curves obtained for real sample analysis show linear range from 0.192 to 0.961 μM, linear correlation coefficient R?=?0.9997 and LOD?=?0.024 μM. The preconcentration factor of about four times was obtained through the passage of 800 μL of a standard solution containing 0.961 μM of Cr (VI) through mini-column of preconcentration followed by elution at 192.5 μL of NH₄OH 0.1 mol L^?1 solution. The solid chromogenic reagent presented high durability (weeks in daily use with mass of 0.0993 g) and good reproducibility in analytical signal. The reactivation of the mini-column of alumina should be executed after ten injections of eluent, using 800 μL of HCl 0.02 mol L^?1 solution in flow through the same. Each cycle of injection and elution of the sample takes about 5 min on the proposed terms. Despite the length of each cycle still be high, low concentrations can be detected using a technique of relatively low cost. This is due in part, the association dissolution of the chromogenic reagent directly in the line and the preconcentration step. Another important factor is the economy of reagent chromogenic, low generation of reject contributing to better quality of the environment, and the high potential for applications to work in field.     

Bioconcentration and half-life of quinalphos pesticide in rice-fish integration system in the Mekong Delta,Vietnam

In order to determine the distribution and enable the elimination of quinalphos, a popular active pesticide compound used in the Mekong Delta, an experiment was set up in a rice-fish integration system in Can Tho City, Vietnam. Fish was stocked into the field when the rice was two-months old. Quinalphos was applied twice in doses of 42.5 g per 1000 m². Water, fish and sediment samples were collected at time intervals and analyzed by a Gas Chromatography Electron Capture Detector system. The results show that quinalphos residues in fish muscles were much higher than those of the water and the bioconcentration factor (logBCF) was above 2 for the fish. The half-life of first and second quinalphos applications were 12.2 and 11.1 days for sediment, 2.5 and 1.1 days for silver barb, 1.9 and 1.3 days for common carp, and 1.1 and 1.0 days for water, respectively.     

Handling the phosphorus paradox in agriculture and natural ecosystems: Scarcity,necessity, and burden of P

This special issue of Ambio compiles a series of contributions made at the 8th International Phosphorus Workshop (IPW8), held in September 2016 in Rostock, Germany. The introducing overview article summarizes major published scientific findings in the time period from IPW7 (2015) until recently, including presentations from IPW8. The P issue was subdivided into four themes along the logical sequence of P utilization in production, environmental, and societal systems: (1) Sufficiency and efficiency of P utilization, especially in animal husbandry and crop production; (2) P recycling: technologies and product applications; (3) P fluxes and cycling in the environment; and (4) P governance. The latter two themes had separate sessions for the first time in the International Phosphorus Workshops series; thus, this overview presents a scene-setting rather than an overview of the latest research for these themes. In summary, this paper details new findings in agricultural and environmental P research, which indicate reduced P inputs, improved management options, and provide translations into governance options for a more sustainable P use.     

Urban wild meat consumption and trade in central Amazonia

The switch from hunting wild meat for home consumption to supplying more lucrative city markets in Amazonia can adversely affect some game species. Despite this, information on the amounts of wild meat eaten in Amazonian cities is still limited. We estimated wild meat consumption rates in 5 cities in the State of Amazonas in Brazil through 1046 door-to-door household interviews conducted from 2004 to 2012. With these data, we modeled the relationship between wild meat use and a selection of socioeconomic indices. We then scaled up our model to determine the amounts of wild meat likely to be consumed annually in the 62 urban centers in central Amazonia. A total of 80.3% of all interviewees reported consuming wild meat during an average of 29.3 (CI 11.6) days per year. Most wild meat was reported as bought in local markets (80.1%) or hunted by a family member (14.9%). Twenty-one taxa were cited as consumed, mostly mammals (71.6%), followed by reptiles (23.2%) and then birds (5.2%). The declared frequency of wild meat consumption was positively correlated with the proportion of rural population as well as with the per capita gross domestic product of the municipality (administrative divisions) where the cities were seated. We estimated that as much as 10,691 t of wild meat might be consumed annually in the 62 urban centers within central Amazonia, the equivalent of 6.49 kg per person per year. In monetary terms, this amounts to US$21.72 per person per year or US$35.1 million overall, the latter figure is comparable to fish and timber production in the region. Given this magnitude of wild meat trade in central Amazonia, it is fundamental to integrate this activity into the formal economy and actively develop policies that allow the trade of more resilient taxa and restrict trade in species sensitive to hunting.