Bioconcentration and half-life of quinalphos pesticide in rice-fish integration system in the Mekong Delta,Vietnam

In order to determine the distribution and enable the elimination of quinalphos, a popular active pesticide compound used in the Mekong Delta, an experiment was set up in a rice-fish integration system in Can Tho City, Vietnam. Fish was stocked into the field when the rice was two-months old. Quinalphos was applied twice in doses of 42.5 g per 1000 m². Water, fish and sediment samples were collected at time intervals and analyzed by a Gas Chromatography Electron Capture Detector system. The results show that quinalphos residues in fish muscles were much higher than those of the water and the bioconcentration factor (logBCF) was above 2 for the fish. The half-life of first and second quinalphos applications were 12.2 and 11.1 days for sediment, 2.5 and 1.1 days for silver barb, 1.9 and 1.3 days for common carp, and 1.1 and 1.0 days for water, respectively.     

Chlorinated naphthalene formation from the oxidation of dichlorophenols

Polychlorinated naphthalenes (PCNs) formed along with dibenzo-p-dioxin and dibenzofuran products in the slow combustion of dichlorophenols (DCPs) at 600 degrees C were identified. Each DCP reactant produced a unique set of PCN products. Major PCN congeners observed in the experiments were consistent with products predicted from a mechanism involving an intermediate formed by ortho-ortho carbon coupling of phenoxy radicals; polychlorinated dibenzofurans (PCDFs) are formed from the same intermediate. Tautomerization of the intermediate and H2O elimination produces PCDFs; alternatively, CO elimination to form dihydrofulvalene and fusion produces naphthalenes. Only trace amounts of tetrachloronaphthalene congeners were formed, suggesting that the preferred PCN formation pathways from chlorinated phenols involve loss of chlorine. 3,4-DCP produced the largest yields of PCDF and PCN products with two or more chlorine substituents. 2,6-DCP did not produce tri- or tetra-chlorinated PCDF or PCN congeners. It did produce 1,8-DCN, however, which could not be explained.     

Facile Preparation of Chitosan Films for High Performance Removal of Reactive Blue 19 Dye from Aqueous Solution

This study aimed at finding effective strategies for high-performance removal of reactive blue 19 (RB19) dye from aqueous solution. Chitosan (CS) films had been prepared by using solvent casting with mild drying for this purpose. The CS films were characterized by X-ray diffraction, field-emission scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy. The performance of RB19 removal using CS were evaluated by varying contact time, solution pH, initial dye concentration, and adsorbent dosage. Adsorption isotherms, kinetics, and desorption were investigated by batch experiments. Results showed that CS films exhibited the optimal adsorption performance for RB19 removal and high maximum adsorption capacities of RB19, which were 799 and 822.4 mg g^?1 at 20 and 40 °C, respectively. Adsorption kinetic data were well described by the pseudo-second-order kinetic model. FTIR analyses further indicated that interactions between RB19 and the CS film occurred during adsorption. The CS films also exhibited satisfactory desorption of RB19 at about 80 % after 30 min of desorption at pH 11. Our study demonstrated that the CS films can be easily prepared and applied for effective removal of RB19 in treatment of wastewater.     

Climate change impacts on a large-scale erosion coast of Hai Hau district,Vietnam and the adaptation

Among the effects of global warming, sea level rise (SLR) and severe typhoons pose the greatest threat to the stability of human settlements along coastlines. Therefore, countermeasures must be developed to mitigate the influences of strong typhoons and persistent SLR for coastal protection. This study assesses climate change impacts on coastal erosion, especially in two projected SLR scenarios of RCP2.6 and RCP8.5. The results show that SLR and severe typhoons lead to the increase of coastal erosion, beach lowering and scour. Moreover, as in projected SLR scenarios, average waves in high tide can cause severe soil erosion at inner slopes and lead to dyke failure by 2060. The paper highlights the need for additional countermeasures to protect the coast of Hai Hau district against SLR and severe typhoons. Among the alternatives available for countering these threats, applying soil stabilization and soil improvement combined with geosynthetics are promising strategies for coastal structures. Hybrid structures can be used with earth reinforcement and soil improvement. Additionally, the paper emphasizes the importance of multiple protective adaptations, including geosynthetics and ecological engineering measures against climate change-induced severe erosion on the coast of Hai Hau district.     

Assessment of soils contamination with veterinary antibiotic residues in Northern Poland using developed MAE-SPE-LC/MS/MS methods

Among the wide range of compounds reaching the soil are the veterinary antimicrobials. Since no regulations regarding acceptable levels of drug concentrations in the environment exist, monitoring tests, particularly concerning soils, are carried out very rarely. This study presents a preliminary assessment of the contamination of agricultural soils in Northern Poland with seven antimicrobial veterinary medicines which has never been carried out before. Veterinary drugs were detected in 54% of the examined soil samples; the most commonly detected drugs were sulfonamides and trimethoprim. The highest indicated concentrations refer to enrofloxacin (57.0 μg kg^?1) and trimethoprim (47.8 μg kg^?1). The presence of these target drugs in the soil environment confirms the need for further monitoring studies. The analytical methods developed in this study are an excellent tool to achieve this goal and allow an estimation of the risk connected with the presence of veterinary antimicrobials in soils.

     

Prediction of membrane fouling using artificial neural networks for wastewater treated by membrane bioreactor technologies: bottlenecks and possibilities

Membrane fouling is a major concern for the optimization of membrane bioreactor (MBR) technologies. Numerous studies have been led in the field of membrane fouling control in order to assess with precision the fouling mechanisms which affect membrane resistance to filtration, such as the wastewater characteristics, the mixed liquor constituents, or the operational conditions, for example. Worldwide applications of MBRs in wastewater treatment plants treating all kinds of influents require new methods to predict membrane fouling and thus optimize operating MBRs. That is why new models capable of simulating membrane fouling phenomenon were progressively developed, using mainly a mathematical or numerical approach. Faced with the limits of such models, artificial neural networks (ANNs) were progressively considered to predict membrane fouling in MBRs and showed great potential. This review summarizes fouling control methods used in MBRs and models built in order to predict membrane fouling. A critical study of the application of ANNs in the prediction of membrane fouling in MBRs was carried out with the aim of presenting the bottlenecks associated with this method and the possibilities for further investigation on the subject.     

Speciation of mercury in the strongly polluted sediments of the Deûle River (France)

The De?le River in Northern France experienced serious contamination from the metallurgical industry, especially from the smelter Metaleurop prior to 2003. In 2002 the surface sediments were collected from the bed of the river around 10 km above and 10 km below the smelter. Total mercury (HgT) and methylmercury (MeHg) concentrations exceeded the background value of 0.1 mg kg(-1). The average concentrations were 19.67 ± 1.02 mg kg(-1) and 10.88 ± 1.08 μg kg(-1), respectively. In 2003 the sediment core samples were collected at two different sites near the factory for survey depth profiles of Hg contamination. The concentrations of HgT and MeHg in sediment cores varied from 10.47 to 259.44 mg kg(-1) and from 3.24 to 82.61 μg kg(-1), respectively. The concentration of total mercury was significantly correlated with the methylmercury concentration in the sediment below a depth of 23.5 cm (R(2) = 0.81, p < 0.01). This may suggest that the production of MeHg is directly related to the HgT concentration. Nevertheless the MeHg/HgT ratio in the upper part of the sediment core was higher than that in the lower part. This suggests that HgT and MeHg may have been co-deposited together. However, the methylmercury production takes place in the surface sediment by microorganisms. The strong correlation observed between MeHg and acid volatile sulfides (AVS) suggests that MeHg variability is associated with the bacterial activity (presence of AVS).     

Correlation of human olfactory responses to airborne concentrations of malodorous volatile organic compounds emitted from swine effluent

Direct multicomponent analysis of malodorous volatile organic compounds (VOCs) present in ambient air samples from 29 swine (Sus scrofa) production facilities was used to develop a 19-component artificial swine odor solution that simulated olfactory properties of swine effluent. Analyses employing either a human panel consisting of 14 subjects or gas chromatography were performed on the air stream from an emission chamber to assess human olfactory responses or odorant concentration, respectively. Analysis of the olfactory responses using Fisher's LSD statistics showed that the subjects were sensitive to changes in air concentration of the VOC standard across dilutions differing by approximately 16%. The effect of chemical synergisms and antagonisms on human olfactory response magnitudes was assessed by altering the individual concentration of nine compounds in artificial swine odor over a twofold concentration range while maintaining the other 18 components at a constant concentration. A synergistic olfactory response was observed when the air concentration of acetic acid was increased relative to the concentration of other VOC odorants in the standard. An antagonistic olfactory response was observed when the air concentration of 4-ethyl phenol was increased relative to the other VOC odorants in the standard. The collective odorant responses for nine major VOCs associated with swine odor were used to develop an olfactory prediction model to estimate human odor response magnitudes to swine manure odorants through measured air concentrations of indicator VOCs. The results of this study show that direct multicomponent analysis of VOCs emitted from swine effluent can be applied toward estimating perceived odor intensity.     

Biodegradation of nitrogen-enriched lignite

Biodegradation of nitrogen-enriched lignite by soil bacteria previously acclimated in hydrogen peroxide-acetic acid lignitic substrate was carried out to assess the effects of nitrogen functional groups on the biodegradation of lignite. Chlorination, oxidation plus nitration, and ammoniation were applied in an attempt to modify the chemical structure of lignite so as to obtain a lignitic substrate that is more compatible to the enzymatical system of ordinary soil bacteria than that of unmodified lignite. Incorporation of nitrogen containing functional groups into lignite structure achieved 4.71 wt%, a value five times higher than that usually found in unmodified (raw) lignite. Data collected through a 16 day incubation time, monitoring production as well as depletion of both nitrate and organic acids, concluded that biodegradation was expedited by the incorporation of nitrogen into the structure of lignite. Twenty-eight compounds were identified based on the results from GC/MS analysis of the products.     

The removal of lignin and phenol from paper mill effluents by electrocoagulation

This study aims to investigate the treatment of paper mill effluents using electrocoagulation. Removal of lignin, phenol, chemical oxygen demand (COD) and biological oxygen demand (BOD) from paper mill effluents was investigated at various current intensities by using different electrodes (Al and Fe) and at various electrolysis times (1.0, 2.5, 5.0 and 7.5min). It was observed that the experiments carried out at 12V, an electrolysis time of 2min and a current intensity of 77.13mA were sufficient for the removal of these pollutants with each electrode. The removal capacities of the process using an Al electrode were 80% of lignin, 98% of phenol, 70% of BOD, and 75% of COD after 7.5min. Using an Fe electrode the removal capacities were 92%, 93%, 80% and 55%, respectively. In addition, it was found that removal of lignin, phenol, BOD and COD increased with increasing current intensity. In the experiments carried out at different current intensities, higher removal can be explained through a decrease in intra-resistance of solution and consequently an increase at the transfer speed of organic species to electrodes. It was also found that Al electrode performs higher efficiency than Fe electrode except for COD removal. However, the time required for removal of BOD was more than that of COD. The results suggest that electrocoagulation could be considered as an effective alternative to paper mill effluents treatment.