南京典型站点春季大气颗粒物数谱分布特征

利用TSI公司的APS和SMPS系统,于2017年4月在江苏省环境监测中心点位连续一个月进行大气颗粒物数谱观测,结果表明,南京市春季典型月份大气颗粒物数浓度和体积浓度均值分别为1.64×104cm~(-3)和1.65×106μm~3/m~3;核模态、爱根核膜态、积聚模态和粗粒子模态数浓度占比分别为22.72%,53.52%,23.72%和0.05%,体积浓度占比分别为0.01%,1.76%,55.82%和42.41%;颗粒物数浓度平均日变化呈现双峰结构;PM_(2.5)体积浓度和质量浓度具有高度相关性;存在明显的新生粒子事件,3~10 nm颗粒物数浓度小时均值短时7 500 cm~(-3)。     

基于Citespace V的城市生态修复研究的可视化分析

为了清晰了解国内外城市生态修复领域的研究现状和未来发展路径,应用Citespace V信息可视化分析软件,对Web of ScienceTM数据库中2000-2017年城市生态修复领域的612篇文献进行了基础知识框架、研究热点、发展趋势的研究,并绘制了网络知识图谱.结果表明:该领域的研究可大致分为4个发展阶段;研究热点主要包括城市生物多样性、城市景观规划与设计、城市生态系统服务等,其中城市生态系统服务突显程度最高,尤其在最近两年该方面研究迅速增多,使其成为主要研究热点.在该领域中美国起步较早且影响力较大,相较而言我国还存在一定差距.今后应在继续增加相关热点问题研究的同时,增加国内与国外相关机构、国内机构间的相互交流与合作.     

中小企业化学品职业危害预防控制指南

为了帮助中小企业控制预防控制化学品职业危害,本文详细介绍了国际劳工组织所推行的中小企业化学品职业危害控制指南,包括化学职业卫生管理的主要内容和基本步骤,关键点危险区的确定方法,改进化学品职业危害管理、实施化学品管理的良好规范、制定化学品管理行动计划和编制全面的化学品清单等方法,以达到系统提高化学品管理水平和持续改进的目标和要求.     

燃煤产生的NOx控制技术

为减少NOx的危害，改善城市环境与生态环境，必须加强对NOx的排放控制。本文在系统总结和分析国内外燃煤NOx污染控制技术及其经济特点的基础上，提出了我国燃煤NOx污染的控制方向。     

Characterization of PM2.5 aerosols dominated by local pollution and Asian dust observed at an urban site in Korea during aerosol characterization experiments (ACE)--Asia Project

Daily fine particulate matter (PM2.5) samples were collected at Gwangju, Korea, during the Aerosol Characterization Experiments (ACE)-Asia Project to determine the chemical properties of PM2.5 originating from local pollution and Asian dust (AD) storms. During the study period, two significant events occurred on April 10-13 and 24-25, 2001, and a minor event occurred on April 19, 2001. Based on air mass transport pathways identified by back-trajectory calculation, the PM2.5 dataset was classified into three types of aerosol populations: local pollution and two AD aerosol types. The two AD types were transported along different pathways. One originated from Gobi desert area in Mongolia, passing through Hunshandake desert in Northern Inner Mongolia, urban and polluted regions of China (AD1), and the other originated in sandy deserts located in the Northeast Inner Mongolia Plateau and then flowed southward through the Korean peninsula (AD2). During the AD2 event, a smoke plume that originated in North Korea was transported to our study site. Mass balance closures show that crustal materials were the most significant species during both AD events, contributing -48% to the PM2.5 mass; sulfate aerosols (19.1%) and organic matter (OM; 24.6%) were the second greatest contributors during the AD1 and AD2 periods, respectively, indicating that aerosol properties were dependent on the transport pathway. The sulfate concentration constituted only 6.4% (4.5 microg/m3) of the AD2 PM2.5 mass. OM was the major chemical species in the local pollution-dominated PM2.5 aerosols, accounting for 28.7% of the measured PM2.5 mass, followed by sulfate (21.4%), nitrate (15%), ammonium (12.8%), elemental carbon (8.9%), and crustal material (6.5%). Together with substantial enhancement of the crustal elements (Mg, Al, K, Ca, Sc, Ti, Mn, Fe, Sr, Zr, Ba, and Ce), higher concentrations of pollution elements (S, V, Ni, Zn, As, Cd, and Pb) were observed during AD1 and AD2 than during the local pollution period, indicating that, in addition to crustal material, the AD dust storms also had a significant influence on anthropogenic elements.     

生态足迹研究现状及基于净初级生产力的计算方法初探

生态足迹是一种有效的再生资源更新能力的定量测度方法，其主要用于评估给定年，给定技术条件下生物圈的再生能力能否满足人类消费需求。本研究对国内外生态足迹模型的理论假设、生态足迹、生物承载力、生态盈余、生态赤字进行了简要介绍；在对国际组织发布的生态足迹报告以及生态足迹文献发表情况进行统计的基础上，回顾了国内外的生态足迹计算方法——基于净初级生产力的计算方法，并与现有的基于全球农业生态区的计算方法进行了比较，探讨了两种方法的优缺点；最后对生态足迹今后的研究重点提出了一些看法和展望。     

Effects of equipment loadings on geosynthetic-lined slope behaviour.

When combined in the lining and covering of waste-containment facilities, soil and geosynthetic components protect the environment by acting as a hydraulic barrier. Equipment loading may significantly increase the tensile stress induced in geosynthetic components, leading to a potential stability problem. Large equipment loadings may also result in a localized circular slip surface during construction operations. New analytical method based on discrete element modelling is proposed for estimating the distribution of tensile force developed in the individual geosynthetic components of the lining system and for evaluating the safety factor of slope failure due to equipment loading. The analytical results of an example are presented to demonstrate the applicability of the analytical method for the lining system of a waste landfill. The analyses of the example show that equipment loading provide a substantial increase in the tensile forces of the geosynthetic components of a lining system and that the possibility of shallow failure due to equipment loading increases as the slope becomes steeper. This method is a useful tool for analysing the lining system of waste landfills with complex lining components.     

基于绝对主成分-多元线性回归的滇池污染源解析

定量解析污染源是湖泊流域水环境管理的重要基础.基于滇池草海和外海多年水质监测数据,采用主成分分析（PCA）方法识别了主要水质指标的污染源类型,利用绝对主成分-多元线性回归模型（APCS-MLR）得到不同污染源对水质的贡献程度.结果表明,草海主要的污染源有农业面源、城市面源和内源3类,外海的主要污染源是农业面源、城镇生活污染源、城市面源和内源4类.与河流水污染源解析结果不同,底泥内源与气象因子对滇池主要水质指标的影响较大.     

水质监测频率与极端气候对高原湖泊入湖河流氮磷通量估算的影响

河流是流域氮磷营养盐的主要输出途径之一,准确掌握其通量变化和驱动因素对流域营养盐管理具有重要意义.本研究以滇池主要入湖河流宝象河为例,基于周水质观测数据和逐日水量数据,构建了河流氮磷通量LOADSET模型.估算了宝象河不同时间尺度（日、季、年）TN和TP的通量,评估了4种低频水质采样和极端气候指数对河流氮磷通量计算的影响.结果表明：①2018年宝象河的TN和TP年通量分别为270.49 t和11.19 t,存在显著的年内差异,夏季是通量最高的季节,分别占TN和TP年通量的40.78%和41.96%.②基于LOADEST模型的低频水质采样的氮磷估算结果与高频采样差异较小,宝象河TN、TP通量估算受采样频率影响较小.③宝象河的TN和TP通量变化受连续5日最大降水量、平均最低气温、平均最高气温、最低气温、最低气温极大值、最高气温极小值和平均温差7种极端气候指数的显著影响.