Desert Water Harvesting to Benefit Wildlife: A Simple, Cheap, And Durable Sub-Surface Water Harvester for Remote Locations

A sub-surface desert water harvester was constructed in the sagebrush steppe habitat of south-central Idaho, U.S.A. The desert water harvester utilizes a buried micro-catchment and three buried storage tanks to augment water for wildlife during the dry season. In this region, mean annual precipitation (MAP) ranges between about 150–250 mm (6″–10″), 70% of which falls during the cold season, November to May. Mid-summer through early autumn, June through October, is the dry portion of the year. During this period, the sub-surface water harvester provides supplemental water for wildlife for 30–90 days, depending upon the precipitation that year. The desert water harvester is constructed with commonly available, “over the counter” materials. The micro-catchment is made of a square-shaped, 20 mL. “PERMALON” polyethylene pond liner (approximately 22.9 m × 22.9 m = 523 m²) buried at a depth of about 60 cm. A PVC pipe connects the harvester with two storage tanks and a drinking trough. The total capacity of the water harvester is about 4777 L (1262 U.S. gallons) which includes three underground storage tanks, a trough and pipes. The drinking trough is refined with an access ramp for birds and small animals. The technology is simple, cheap, and durable and can be adapted to other uses, e.g. drip irrigation, short-term water for small livestock, poultry farming etc. The desert water harvester can be used to concentrate and collect water from precipitation and run-off in semi-arid and arid regions. Water harvested in such a relatively small area will not impact the ground water table but it should help to grow small areas of crops or vegetables to aid villagers in self-sufficiency.     

An evaluation of mass absorption cross-section for optical carbon analysis on Teflon filter media

Black carbon (BC) or elemental carbon (EC) is a by-product of incomplete fuel combustion, and contributes adversely to human health, visibility, and climate impacts. Previous studies have examined nondestructive techniques for particle light attenuation measurements on Teflon® filters to estimate BC. The incorporation of an inline Magee Scientific OT21 transmissometer into the MTL AH-225 robotic weighing system provides the opportunity to perform optical transmission measurements on Teflon filters at the same time as the gravimetric mass measurement. In this study, we characterize the performance of the inline OT21, and apply it to determine the mass absorption cross-section (MAC) of PM_2.5 BC across the United States. We analyzed 5393 archived Teflon® filters from the Chemical Speciation Network (CSN) collected during 2010–2011 and determined MAC by comparing light attenuation on Teflon® filters to corresponding thermal EC on quartz-fiber filters. Results demonstrated the importance of the initial transmission (I₀) value used in light attenuation calculations. While light transmission varied greatly within filter lots, the average I₀ of filter blanks during the sampling period provided an estimate for archived filters. For newly collected samples, it is recommended that filter-specific I₀ measurements be made (i.e., same filter before sample collection). The estimated MAC ranged from 6.9 to 9.4 m²/g and varied by region and season across the United States, indicating that using a default value may lead to under- or overestimated BC concentrations. An analysis of the chemical composition of these samples indicated good correlation with EC for samples with higher EC content as a fraction of total PM_2.5 mass, while the presence of light-scattering species such as crustal elements impacted the correlation affecting the MAC estimate. Overall, the method is demonstrated to be a quick, cost-effective approach to estimate BC from archived and newly sampled Teflon® filters by combining both gravimetric and BC measurements.

Implications: Robotic optical analysis is a valid, cost-effective means to obtain a vast amount of BC data from archived and current routine filters. A tailored mass absorption cross-section by region and season is necessary for a more representative estimate of BC. Initial light transmission measurements play an important role due to the variability in blank filter transmission. Combining gravimetric mass and BC analysis on a single Teflon® filter reduces costs for monitoring agencies and maximizes data collection.     

Influencing climate change regulations: examining responses from large-scale firms

Recent climate change projections and a push towards a universal agreement on carbon emission reductions suggest that firms will need to respond to future regulatory changes. This paper employs an influencing strategies lens to examine how large-scale firms might respond to future climate change regulations. The study uses a structured qualitative methodology to explore and explicate the strategic responses from 21 international firms to the proposed emissions trading scheme outlined in Australia's Garnaut Climate Change Review. The results of the analysis show that firms can use pre-emptive influencing strategies in attempts to shape and mould regulatory design parameters, secure high levels of transitional economic support, and shift the balance of public policies and expenditure. Complementary defensive strategies may also target policy makers and regulators with some of the potential negative consequences of the new regulations.     

Method to assess component contribution to toxicity of complex mixtures: Assessment of puberty acquisition in rats exposed to disinfection byproducts

A method based on regression modeling was developed to discern the contribution of component chemicals to the toxicity of highly complex, environmentally realistic mixtures of disinfection byproducts(DBPs). Chemical disinfection of drinking water forms DBP mixtures.Because of concerns about possible reproductive and developmental toxicity, a whole mixture(WM) of DBPs produced by chlorination of a water concentrate was administered as drinking water to Sprague–Dawley(S–D) rats in a multigenerational study. Age of puberty acquisition,i.e., preputial separation(PPS) and vaginal opening(VO), was examined in male and female offspring, respectively. When compared to controls, a slight, but statistically significant delay in puberty acquisition was observed in females but not in males. WM-induced differences in the age at puberty acquisition were compared to those reported in S–D rats administered either a defined mixture(DM) of nine regulated DBPs or individual DBPs. Regression models were developed using individual animal data on age at PPS or VO from the DM study. Puberty acquisition data reported in the WM and individual DBP studies were then compared with the DM models. The delay in puberty acquisition observed in the WM-treated female rats could not be distinguished from delays predicted by the DM regression model, suggesting that the nine regulated DBPs in the DM might account for much of the delay observed in the WM. This method is applicable to mixtures of other types of chemicals and other endpoints.     

Incorporating stakeholder decision support needs into an integrated regional Earth system model

A new modeling effort exploring the opportunities, constraints, and interactions between mitigation and adaptation at regional scale is utilizing stakeholder engagement in an innovative approach to guide model development and demonstration, including uncertainty characterization, to effectively inform regional decision making. This project, the integrated Regional Earth System Model (iRESM), employs structured stakeholder interactions and literature reviews to identify the most relevant adaptation and mitigation alternatives and decision criteria for each regional application of the framework. The information is used to identify important model capabilities and to provide a focus for numerical experiments. This paper presents the stakeholder research results from the first iRESM pilot region. The pilot region includes the Great Lakes Basin in the Midwest portion of the United States as well as other contiguous states. This geographic area (14 states in total) permits cohesive modeling of hydrologic systems while also providing strong gradients in climate, demography, land cover/land use, and energy supply and demand. The results from the stakeholder research indicate that, for this region, iRESM should prioritize addressing adaptation alternatives in the water resources, urban infrastructure, and agriculture sectors, including water conservation, expanded water quality monitoring, altered reservoir releases, lowered water intakes, urban infrastructure upgrades, increased electric power reserves in urban areas, and land use management/crop selection changes. For mitigation in this region, the stakeholder research implies that iRESM should focus on policies affecting the penetration of renewable energy technologies, and the costs and effectiveness of energy efficiency, bioenergy production, wind energy, and carbon capture and sequestration.     

Estimating human exposure to transport noise in central Dublin, Ireland

This paper reports on research conducted to determine estimates of the extent of environmental noise exposure from road transport on residents and workers in central Dublin, Ireland. The Harmonoise calculation method is used to calculate noise values for the study area while a Geographical Information System (GIS) is utilised as a platform upon which levels of noise exposure are estimated. Residential exposure is determined for L(den) and L(night) while worker exposure is determined for L(den). In order to analyse the potential of traffic management as a noise abatement measure, traffic was redirected from the main residential areas to alternative road links and the revised exposure levels were determined. The results show that the extent of noise exposure in Dublin is considerable, and in relative terms, it is worse for the night-time period. In addition, the results suggest also that traffic management measures have the potential to lead to significant reductions in the level of noise exposure provided that careful consideration is given to the impact of traffic flows on residential populations.     

An Evaluation of the Semi-VOST Method for Determining Emissions from Hazardous Waste Incinerators

The Semi-Volatile Organic Sampling Train method was investigated to determine its reliability and to determine the bias and precision of the method when used to determine emissions from hazardous waste incinerators. Experiments showed that the matrix and sampling variables usually involved in sampling emissions from a hazardous waste incinerator had no significant effect on the recovery of 11 different organic compounds. Significant losses of the sampled compounds can occur during sample preparation. The degree of loss appears to be directly related to the compounds, vapor pressure. These losses can be corrected for by adding deuterated surrogates to the sample and analyzing the surrogates along with the native compounds.

The bias determination was based on dynamic spiking of the sampling train with five deuterated organic compounds selected from Appendix VIII of the Resource Conservation and Recovery Act regulations. The results show biases of from -1 ± 8 percent to -18 ± 27 percent for chlorinated and nonchlorinated compounds. Pyridine, a water-soluble compound, showed a larger bias of-29 ± 13 percent. Particular attention to the recovery of water soluble compounds is necessary to minimize bias in their determinations. Further work is needed to determine the reliability of laboratory-determined retention volumes that are used to determine sampling conditions.     

GEOLOGIC INFERENCE FROM “FLOW NET” TRANSMISSIVITY DETERMINATION: THREE CASE STUDIES1

A graphical inverse method for determining the regional transmissivity distribution was applied to three field problems. The study areas were the Hanford Site, Washington; the Rocky Mountain Arsenal, Colorado; and the Nevada Test Site, Nevada. This method can aid in flow system conceptualization by revealing the location of bedrock controls for groundwater flow. It is a valuable tool for aiding the hydrogeologist in asking questions about the nature of trends in the pattern of transmissivity values. Quantitative estimates of regional transmissivities can be used as starting points for further parameter refinement. Sensitivity analysis using Monte Carlo simulation shows that quantitative estimates of transmissivity can be obtained when measurement error in the hydraulic head does not cause a large error in the hydraulic gradient.     

The role of facet importance as a moderator in job satisfaction processes

Two studies were designed to test hypotheses derived from Locke's (1969, 1976, 1984) model of job satisfaction. Consistent with the model, both studies found that perceived have-want discrepancy scores were powerful predictors of facet job satisfaction. In addition, facet importance tended to moderate this relationship in the manner predicted by Locke. Workers who viewed a job facet as having high importance were more satisfied with a small perceived have-want discrepancy and more dissatisfied with a large discrepancy than workers who viewed the facet as having low importance. Finally, as expected, facet importance failed to moderate the relationship between facet satisfaction and overall job satisfaction. This finding supports Locke's proposition that facet satisfaction scores are ‘implicitly weighted’ by facet importance. Implications and directions for future research are discussed.     

Precaution,uncertainty and causation in environmental decisions

What measures of uncertainty and what causal analysis can improve the management of potentially severe, irreversible or dreaded environmental outcomes? Environmental choices show that policies intended to be precautionary (such as adding MTBE to petrol) can cause unanticipated harm (by mobilizing benzene, a known leukemogen, in the ground water). Many environmental law principles set the boundaries of what should be done but do not provide an operational construct to answer this question. Those principles, ranging from the precautionary principle to protecting human health from a significant risk of material health impairment, do not explain how to make environmental management choices when incomplete, inconsistent and complex scientific evidence characterizes potentially adverse environmental outcomes. Rather, they pass the task to lower jurisdictions such as agencies or authorities. To achieve the goals of the principle, those who draft it must deal with scientific casual conjectures, partial knowledge and variable data. In this paper we specifically deal with the qualitative and quantitative aspects of the European Union's (EU) explanation of consistency and on the examination of scientific developments relevant to variability and uncertain data and causation. Managing hazards under the precautionary principle requires inductive, empirical methods of assessment. However, acting on a scientific conjecture can also be socially unfair, costly, and detrimental when applied to complex environmental choices. We describe a constructive framework rationally to meet the command of the precautionary principle using alternative measures of uncertainty and recent statistical methods of causal analysis. These measures and methods can bridge the gap between conjectured future irreversible or severe harm and scant scientific evidence, thus leading to more confident and resilient social choices. We review two sets of measures and computational systems to deal with uncertainty and link them to causation through inductive empirical methods such as Bayesian Networks. We conclude that primary legislation concerned with large uncertainties and potential severe or dreaded environmental outcomes can produce accurate and efficient choices. To do so, primary legislation should specifically indicate what measures can represent uncertainty and how to deal with uncertain causation thus providing guidance to an agency's rulemaking or to an authority's writing secondary legislation. A corollary conclusion with legal, scientific and probabilistic implications concerns how to update past information when the state of information increases because a failure to update can result in regretting past choices. Elected legislators have the democratic mandate to formulate precautionary principles and are accountable. To preserve that mandate, imbedding formal methods to represent uncertainty in the statutory language of the precautionary principle enhances subsequent judicial review of legislative actions. The framework that we propose also reduces the Balkanized views and interpretations of probabilities, possibilities, likelihood and uncertainty that exists in environmental decision-making.