Toxic effect of alpha cypermethrin,an environmental pollutant,on myocardial tissue in male wistar rats

Environmental Science and Pollution Research - α-Cypermethrin (CYP) is a pyrethroid insecticide-like environmental pollutant, widely found in the environment. New research links exposure to...     

Evaluation of the waste heat discharged from the Di-ammonium Phosphate production plant: a case study

Journal of Material Cycles and Waste Management - This work presents an energy analysis of an industrial plant of production of Di-ammonium Phosphate (DAP plant). It aims to evaluate the important...     

Injection-Molded Bioblends from Lignin and Biodegradable Polymers: Processing and Performance Evaluation

This paper investigates the effects of the incorporation of lignin and small quantities of epoxidized natural rubber (ENR) as an impact modifying agent on blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL). The addition of lignin resulted in a slight improvement of flexural strength and modulus of the ternary blending system. Incorporation of ENR into the blend resulted in an increase in notched Izod impact strength from 40 to 135% depending on the concentration of ENR. The addition of lignin into the blend resulted in an improvement of thermal stability of the ternary blend system. Morphological analysis showed a good dispersion of PHBV phases and lignin within the PCL matrix. Rheological characterization revealed that the presence of lignin resulted in increased storage modulus of the bioblend.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

COVID-19 and beliefs about tobacco use: an online cross-sectional study in Iran

Environmental Science and Pollution Research - There is mixed evidence surrounding the relationship between tobacco use and COVID-19 infection/progression. The current study investigates beliefs...     

Photocatalytic and biodegradation treatments of paracetamol: investigation of the in vivo toxicity

Environmental Science and Pollution Research - Medicines and drugs consumption by all populations of the world can be expected to result in the contamination of the environment since 30–90%...     

单室MFC型生物毒性传感器对重金属离子的检测研究

构建了单室微生物燃料电池(air-cathode microbial fuel cell,ACMFC)型生物毒性传感器,以含重金属离子(Cd2+、Cu2+)人工配水为检测对象,分析了有毒物质对检测仪的抑制率与有毒物质浓度的线性关系.结果表明,①单室MFC型生物毒性传感器结构简单,操作方便,灵敏度较高,可用于水体重金属离子(Cd2+、Cu2+)生物毒性的快速检测;②在实验条件下,该生物毒性传感器检测时间4h,清洗时间2～10min,恢复时间4h;③检测结果显示,实验室自配Cd2+、Cu2+及其混合液IC20值分别为0.6、0.8和0.25mg/L,有毒物质浓度与MFC产电量的抑制率呈显著正相关,相关系数分别为0.9960、0.9744和0.9907.     

Evaluating the phytoremediation potential of Phragmites australis grown in pentachlorophenol and cadmium co-contaminated soils

Pot-culture experiments were conducted to evaluate the phytoremediation potential of a wetland plant species, Phragmites australis in cadmium (Cd) and pentachlorophenol (PCP) co-contaminated soil under glasshouse conditions for 70 days. The treatments included Cd (0, 5 and 50 mg kg^?1) without or with PCP (50 and 250 mg kg^?1). The results showed that growth of P. australis was significantly influenced by interaction of Cd and PCP, decreasing with either Cd or PCP additions. Plant biomass was inhibited and reduced by the rate of 89 and 92 % in the low and high Cd treatments and by 20 and 40 % in the low and high PCP treatments compared to the control. The mixture of low Cd and low PCP lessened Cd toxicity to plants, resulting in improved plant growth (by 144 %). Under the joint stress of the two contaminants, the ability of Cd uptake and translocation by P. australis was weak, and the BF and TF values were inferior to 1.0. A low proportion of the metal is found aboveground in comparison to roots, indicating a restriction on transport upwards and an excluding effect on Cd uptake. Thus, P. australis cannot be useful for phytoextraction. The removal rate of PCP increased significantly (70 %) in planted soil. Significant positive correlations were found between the DHA and the removal of PCP in planted soils which implied that plant root exudates promote the rhizosphere microorganisms and enzyme activity, thereby improving biodegradation of PCP. Based on results, P. australis cannot be effective for phytoremediation of soil co-contaminated with Cd and PCP. Further, high levels of pollutant hamper and eventually inhibit plant growth. Therefore, developing supplementary methods (e.g. exploring the partnership of plant–microbe) for either enhancing (phytoextraction) or reducing the bioavailability of contaminants in the rhizosphere (phytostabilization) as well as plant growth promoting could significantly improve the process of phytoremediation in co-contaminated soil.     

Statistical thermodynamics of adsorption of dye DR75 onto natural materials and its modifications: double-layer model with two adsorption energies

In this article, adsorption modelling was presented to describe the sorption of textile dye, Direct Red 75 (DR75), from coloured wastewater onto the natural and modified adsorbent, Posidonia oceanica. The formulation of the double-layer model with two energy levels was based on statistical physics and theoretical considerations. Thanks to the grand canonical ensemble in statistical physics some physico-chemical parameters related to the adsorption process were introduced in the analytical model expression. Fitting results show that the dye molecules are adsorbed in parallel position to the adsorbent surface. The magnitudes of the calculated adsorption energies show that the DR75 dye is physisorbed onto Posidonia. Both Van der Waals and hydrogen interactions are implicated in the adsorption process. Despite its simplicity, the model fits a wide range of experimental data, thereby supporting the underlying data that the grafted groups facilitate the parallel anchorage of the anionic dye molecule. Thermodynamic parameters, such as adsorption energy, entropy, Gibbs free adsorption energy and internal energy were calculated according to the double-layer model. Results suggested that the DR75 adsorption onto Posidonia was a spontaneous and exothermic process.     

Distribution and ecological risk of polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) in surface sediments from the Bizerte lagoon,Tunisia

Polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs) were determined in 18 surface sediment samples collected from Bizerte lagoon, Tunisia. The total concentrations of ten PCBs (∑PCBs) and of four OCPs (∑OCPs) in the sediments from this area ranged from 0.8 to 14.6 ng g^?1 dw (average value, 3.9 ng g^?1 dw) and from 1.1 to 14.0 ng g^?1 dw (average value, 3.3 ng g^?1 dw), respectively. Among the OCPs, the range of concentrations of dichlorodiphenyltrichloroethane and its metabolites (DDTs) and hexachlorobenzene (HCB) were 0.3–11.5 ng g^?1 dw (1.9 ng g^?1 dw) and 0.6–2.5 ng g^?1 dw (1.4 ng g^?1 dw), respectively. Compositional analyses of the POPs indicated that PCB 153, 138 and 180 were the predominant congeners accounting for 60 % of the total PCBs. In addition, p,p′-DDT was found to be the dominant DDTs, demonstrating recent inputs in the environment. Compared with some other regions of the world, the Bizerte lagoon exhibited low levels of PCBs and moderate levels of HCB and DDTs. The high ratios ΣPCBs/ΣDDTs indicated predominant industrial versus agricultural activities in this area. According to the established guidelines for sediment quality, the risk of adverse biological effects from such levels of OCPs and PCBs, as recorded at most of the study sites, was insignificant. However, the higher concentrations in stations S1 and S3 could cause biological damage.