Evaluation of two adsorbents for diffusive sampling and thermal desorption-gas chromatographic analysis of monoterpenes in air

Tube type samplers with two different adsorbents, Chromosorb 106 and Tenax TA, were evaluated by laboratory experiments and field tests for simultaneous diffusive sampling of alpha-pinene, beta-pinene and delta 3-carene and subsequent thermal desorption-gas chromatographic analysis. No statistically significant effects of exposure time, concentrations of monoterpenes or relative humidity were found for samplers with Chromosorb 106 when running a factorial design, with the exception of the adsorption of delta 3-carene, for which some weak effects were noted. Samplers with Tenax TA were affected by the sampling time as well as the concentration for all terpenes, with a strong interaction effect between these two factors. The terpenes showed good storage stability on both adsorbents. No effect of back-diffusion was noted when using Chromosorb 106, while Tenax TA showed some back-diffusion effects. The uptake rates, in ml min-1, for the terpenes on Chromosorb 106 were 0.36 for alpha-pinene, 0.36 for beta-pinene and 0.40 for delta 3-carene. The corresponding average values on Tenax TA were 0.30 for alpha-pinene, 0.32 for beta-pinene and 0.38 for delta 3-carene. The field validation proved that diffusive sampling on Chromosorb 106 agreed well with pumped sampling on charcoal for stationary samples, while the personal samples indicated a discrepancy of 25% between Chromosorb 106 and charcoal samples. Tenax TA generally gave lower results than Chromosorb 106 in all field samples. Samplers packed with Chromosorb 106 could be used to monitor terpene levels in workplaces such as sawmills. The major advantages with this method are the sampling procedure, which is simple to perform compared to other techniques, the easily automated analysis procedure and the possibility to reuse the samplers.     

Automated micro-transfer printing with cantilevered stamps

This paper demonstrates the use of a flexible instrumented stamp to enable automated micro transfer printing as a route to large-area, deterministic assembly of microstructured device components or ‘inks’. The ability to instrument the stamp, a critical component for retrieval and placement of a micro device, to detect contact and monitor localized forces during critical events in the printing process not only allows for the development of a robust manufacturing process, but also for a unique vantage point from which to study fundamental issues and phenomena associated with adhesion and delamination of thin films from a variety of substrate materials. This paper presents basic design analysis on the requirements of the cantilevers for compatibility with a typical transfer printing environment. Off-the-shelf thin film strain gages are integrated with a thin elastomeric post as a preliminary prototype and the feasibility of transfer printing with it is demonstrated. Further, the set-up is calibrated to produce force signals for event detection and in situ diagnosis of the process.     

Pilot-Scale Demonstration of an Innovative Treatment for Vapor Emissions

ABSTRACT

Researchers from the National Renewable Energy Laboratory recently conducted a pilot-scale study at McClellan Air Force Base (AFB) in Sacramento, CA. The objective of the test was to determine the effectiveness of an ambient-temperature, solar-powered photocatalytic oxidation treatment unit for destroying emissions of chlorinated organic compounds from an air stripper. This paper reports test results and discusses applications and limitations of the technology.

A 10-standard-cubic-foot-per-minute (SCFM) (28.3 L/min) slip stream of air from an air stripper at Operative Unit 29-31 at McClellan AFB was passed through a reactor that contained a lightweight, perforated, inert support coated with photoactive titanium dioxide. The reactor faced south and was tilted at a 45° angle from vertical so that the light-activated catalyst received most of the available sunlight. An online portable gas chro-matograph with two identical columns simultaneously analyzed the volatile organic compounds contained in the reactor inlet and outlet air streams. Summa canister grab samples of the inlet and outlet were also collected and sent to a certified laboratory for U.S. Environmental

Protection Agency Method TO-14 analysis and verification of our field analyses. Three weeks of testing demonstrated that the treatment system's destruction and removal efficiencies (DREs) are greater than 95% at 10 SCFM with UV intensities at or greater than 1.5 milliwatts/square centimeter (mW/cm²). DREs greater than 95% at 20 SCFM were obtained under conditions where UV irradiation measured at or greater than 2 mW/cm². In Sacramento, this provided 6 hours of operation per clear or nearly clear day in April. A solar tracking system could extend operating time. The air stream also contained trace amounts of benzene. We observed no loss of system performance during testing.     

JUSTIFICATION FOR A REDUCTION IN THE CREST-STAGE GAGE PROGRAM IN LOUISIANA1

The crest-stage gage program in Louisiana was evaluated to determine if the data were adequate for use in developing regional flood-frequency equations and to determine if any crest-stage gage stations could be discontinued. An abundance of data at many crest-stage gage stations and a lack of data for urban areas and flat-slope areas indicated a need for a shift in the number, type, and locations of gages. Correlations and comparisons of annual peak discharges and watershed characteristics of 96 existing stations resulted in the elimination of 72 stations and the addition of one new station, reducing the total network to 25 stations that could be used for future flood-frequency analyses. The adequacy of the reduced network for development and verification of regional flood-frequency equations was tested by comparing a set of regional flood-frequency equations developed using data from the full network with a set developed using data from the reduced network. The results indicate that the crest-stage gage network can be reduced to 25 stations and still provide adequate information for future flood-frequency analyses.     

A GIS Model of Subsurface Water Potential for Aquatic Resource Inventory,Assessment, and Environmental Management

Biological, chemical, and physical attributes of aquatic ecosystems are often strongly influenced by groundwater sources. Nonetheless, widespread access to predictions of subsurface contributions to rivers, lakes, and wetlands at a scale useful to environmental managers is generally lacking. In this paper, we describe a neighborhood analysis approach for estimating topographic constraints on spatial patterns of recharge and discharge and discuss how this index has proven useful in research, management, and conservation contexts. The Michigan Rivers Inventory subsurface flux model (MRI-DARCY) used digital elevation and hydraulic conductivity inferred from mapped surficial geology to estimate spatial patterns of hydraulic potential. Model predictions were calculated in units of specific discharge (meters per day) for a 30-m²-cell raster map and interpreted as an index of potential subsurface water flux (shallow groundwater and event through-flow). The model was evaluated by comparison with measurements of groundwater-related attributes at watershed, stream segment, and local spatial scales throughout Lower Michigan (USA). Map-based predictions using MRI-DARCY accounted for 85% of the observed variation in base flow from 128 USGS gauges, 69% of the observed variation in discharge accrual from 48 river segments, and 29% of the residual variation in local groundwater flux from 33 locations as measured by hyporheic temperature profiles after factoring out the effects of climate. Although it does not incorporate any information about the actual water table surface, by quantifying spatial variation of key constraints on groundwater-related attributes, the model provides strata for more intensive study, as well as a useful spatial tool for regional and local conservation planning, fisheries management, wetland characterization, and stream assessment.     

Central place food caching: a field experiment with red-backed shrikes (Lanius collurio L.)

Summary Red-backed shrikes (Lanius collurio L.) stored experimentally presented mice (Mus musculus L) by reimpaling them on thorns of sloe bushes (Prunus spinosa L.) in the vicinity of the nest. Large mice (20 g) were stored further away from the nest than small mice (4 g), while the smallest mice (1 g) were transported directly to the nest and cut up there. Large prey required more round trips to deliver than smaller prey (4 g). Time to immobilize, load and deliver the prey and the proportion of undigestable tissue increased with prey size. Birds used stored prey as an alternative to hunting in other patches as expected from patch use models. The birds maintained a high rate of food delivery to the young by using stored mice during periods when their foraging success of natural prey was low. Several aspects of the shrike's food storing behaviour are in qualitative accord with suggestions derived from models assuming maximization of energy delivery rate.     

Manure placement depth impacts on crop yields and N retained in soil

The objective of this study was to determine the impact of manure placement depth on crop yield and N retention in soil. Experimental treatments were deep manure injection (45 cm), shallow manure injection (15 cm), and conventional fertilizer-based management with at least three replications per site. Water infiltration, and changes in soil N and P amounts were measured for up to 30 months and crop yield monitored for three seasons following initial treatment. Deep and shallow manure injections differed in soil inorganic N distributions. For example, in the manure slot the spring following application, NO₃-N in the surface 60 cm was higher (p < .01) when injected 15 cm (21.4 μ g/g) into the soil than 45 cm (11.7 μ g/g), whereas NH₄-N had opposite results with shallow injection having less (p = 0.045) NH₄-N (102 μ g/g) than deep (133 μ g/g) injection. In the fall one year after the manure was applied, NO₃-N and NH₄-N were lower (p = 0.001) in the shallow injection than the deep injection. The net impact of manure placement on total N was that deep injection had 31, 59, and 44 more kg N ha^{? 1} than the shallow injection treatment 12, 18, and 30 months after application, respectively. Deep manure injection did not impact soybean (Glycine max L.) yield, however corn (Zea mays L.) yield increased if N was limiting. The higher corn yield in the deep injected treatment was attributed to increased N use efficiency. Higher inorganic N amounts in the deep injection treatment were attributed to reduced N losses through ammonia volatilization, leaching, or denitrification. Results suggest that deep manure placement in glacial till soil may be considered a technique to increase energy, N use efficiency, and maintain surface and ground water quality. However, this technique may not work in glacial outwash soils due to the inability to inject into a rocky subsurface.     

Distribution of some trace metals and their fluxes in the Genesee River,NY

Total and particulate metal concentrations, measured during intensive synoptic studies of the Genesee River, NY, correlated with suspended-sediment concentration and river discharge. Dissolved metal concentrations, on the other hand, showed little systematic variation over the length of the river. Metal and sediment fluxes for two elevated-discharged periods peaked at a midbasin sampling site. For most metals at most sampling sties particulate materials comprised over one-half of the total material. Comparison of particulate material metal concentrations, normalized to the measured suspended-sediment concentrations had with basinwide average values shows that sites having low suspended-sediment concentrations had high particulate material metal contents relative to the basin averages, while sites with high suspended-sediment concentration had low metal contents. These results are consistent with a metal transport mechanism in the Genesee River involving (1) a nearly constant dissolved component, (2) a fine acid-soluble component, and (3) a coarse component that is effectively a neutral diluent in the sediment. Chemical factors, such as sediment organic content, also appear to affect metal transport in the Genesee River.     

Flash competition in male Photinus macdermotti fireflies

Summary The courtship of Photinus macdermotti fireflies involves a flash code in which the male emits a pair of flashes about two seconds apart and the female responds with a flash about 1.2 s after the second flash of the male pair. The male repeats his pair of courting flashes at varying intervals of four seconds or more. Lloyd (1979, 1981 a, b) observed that rival males in Florida sometimes interject flashes between the courtship flashes of the courting male. We have found that the competitive behavior of males of the same species on Long Island, New York, was somewhat different. Rival males timed their competing flashes from either the first or second of the original males's courting flashes. When a competing flash from the rival male was timed from the first courting flash it was synchronized with the original male's second courting flash. When a competing flash was timed from the second courting flash, a delayed flash resulted which appeared after the female's response. In either case the male's display period was preserved, insuring that the female would continue to respond. Either of these rival male flashes could sometimes induce the female to respond in his direction.