Application of magnetic particles modified with amino groups to adsorb copper ions in aqueous solution

A magnetic adsorbent can be easily recovered from treated water by magnetic force,without requiring further downstream treatment.In this research,amine-functionalized silica magnetite has been synthesized using N-[3-(trimethoxysilyl)propyl]-ethylenediamine(TPED) as a surface modification agent.The synthesized magnetic amine adsorbents were used to adsorb copper ions in an aqueous solution in a batch system,and the maximum adsorption was found to occur at pH 5.5 ± 0.1.The adsorption equilibrium data fitted t...     

Adsorption of arsenic(V) by iron-oxide-coated diatomite (IOCD)

Purposes and aims  

Economically efficient methods for removing arsenic from the drinking water supply are urgently needed in many parts of the world. Iron oxides are known to have a strong affinity for arsenic in water. However, they are commonly present in the forms of fine powder or floc, which limits their utility in water treatment. In this study, a novel granular adsorbent, iron-oxide-coated diatomite (IOCD), was developed and examined for its adsorption of arsenic from water.     

Model evaluation of the phytoextraction potential of heavy metal hyperaccumulators and non-hyperaccumulators

Evaluation of the remediation ability of zinc/cadmium in hyper- and non-hyperaccumulator plant species through greenhouse studies is limited. To bridge the gap between greenhouse studies and field applications for phytoextraction, we used published data to examine the partitioning of heavy metals between plants and soil (defined as the bioconcentration factor). We compared the remediation ability of the Zn/Cd hyperaccumulators Thlaspi caerulescens and Arabidopsis halleri and the non-hyperaccumulators Nicotiana tabacum and Brassica juncea using a hierarchical linear model (HLM). A recursive algorithm was then used to evaluate how many harvest cycles were required to clean a contaminated site to meet Taiwan Environmental Protection Agency regulations. Despite the high bioconcentration factor of both hyperaccumulators, metal removal was still limited because of the plants' small biomass. Simulation with N. tabacum and the Cadmium model suggests further study and development of plants with high biomass and improved phytoextraction potential for use in environmental cleanup.     

Evaporation of components from a miscible solution

Considerations are given to the simultaneous evaporation of both components in a miscible (binary) solution based on the properties of related components. Rates of evaporation of several binary systems of nonpolar organics and of polar organics with water in unstirred solutions were determined and interpreted using the model previously proposed. This study presents an approach to assess the evaporative loss of the volatile solute and solvent components from a (miscible) solution that may become a source of concern as a health risk.     

Lightweight Concrete Containing an Alkaline Resistant Starch-Based Aquagel

Starch aquagel-based lightweight concrete has properties similar to those of other lightweight concrete products. However, starch aquagels are unstable in the strongly alkaline conditions typical of Portland Cement-based concrete and may interfere with the setting process. The effect of alkali treatments on the physical, mechanical, and functional properties of starch aquagels and aquagels from starch/polymer blends was investigated. Starch was blended at 100–115°C in a twin-screw extruder with five different polymers to determine whether the blends improved alkaline resistance. Polymer blends containing 5%, 15%, and 30% of the polymer hydrated and formed aquagels when equilibrated in water for 24 h. However, equilibrium moisture content was lower for the blends compared to the starch control. Aquagels equilibrated in 0.15 N NaOH swelled, lost compressive strength and had greater than 90% moisture. The blend of starch and 30% PVOH absorbed less moisture and was more resistant to alkaline dissolution in 1 N NaOH than the other blends tested making it a more suitable material for aquagel-based concrete. The moisture content of starch-based aquagels and mixing time were critical factors in determining setting times. The size of aquagel blends had a minor effect on density and compressive strength.     

Fuzzy multiple-criteria decision-making approach for industrial green engineering

This paper describes a fuzzy hierarchical analytic approach to determine the weighting of subjective judgments. In addition, it presents a nonadditive fuzzy integral technique to evaluate a green engineering industry case as a fuzzy multicriteria decision-making (FMCDM) problem. When the investment strategies are evaluated from various aspects, such as economic effectiveness, technical feasibility, and environmental regulation, it can be regarded as an FMCDM problem. Since stakeholders cannot clearly estimate each considered criterion in terms of numerical values for the anticipated alternatives/strategies, fuzziness is considered to be applicable. Consequently, this paper uses triangular fuzzy numbers to establish weights and anticipated achievement values. By ranking fuzzy weights and fuzzy synthetic utility values, we can determine the relative importance of criteria and decide the best strategies. This paper applies what is called a λ fuzzy measure and nonadditive fuzzy integral technique to evaluate the synthetic performance of green engineering strategies for aquatic products processors in Taiwan. In addition, we demonstrate that the nonadditive fuzzy integral is an effective evaluation and appears to be appropriate, especially when the criteria are not independent.     

SPECTRAL ANALYSIS OF TIDAL FLUCTUATIONS IN GROUND WATER LEVEL1

ABSTRACT: Water level data at 16 ground water wells and two sea water gauging stations, coupled with barometric measurements in an alluvial plain in the central‐west region of Taiwan, are analyzed using spectral analysis in the time and frequency domains. The semi‐diurnal component from water level station is observed to be the most noticeable signal while the diurnal component is the less distinct signal recorded at the water level stations. Both semidiurnal and diurnal components are coupled with atmospheric pressure measurements. From the atmospheric pressure data, spectral analysis indicates that both the raw and the pressure adjusted water levels are almost in phase and retain the same amplitude in this area. It implies that the effect of pressure variations is not significant for the sea water and ground water level nearby; the astronomical tidal components, as expected, are the main factor causing fluctuation of ocean water and ground water levels in the Choshuihsi alluvial plain.     

Water solubility enhancements of pyrene by single and mixed surfactant solutions

ＩｎｔｒｏｄｕｃｔｉｏｎＳｕｒｆａｃｔａｎｔｓｅｎｈａｎｃｅｔｈｅｒｅｍｅｄｉａｔｉｏｎｏｆＮＡＰＬ ｃｏｎｔａｍｉｎａｔｅｄｓｉｔｅｓｂｙｉｎｃｒｅａｓｉｎｇｔｈｅａｑｕｅｏｕｓ ｐｈａｓｅｃｏｎｃｅｎｔｒａｔｉｏｎｏｆｔｈｅＮＡＰＬｖｉａｍｉｃｅｌｌｅｆｏｒｍａｔｉｏｎ ,ｍｉｃｒｏｅｍｕｌｓｉｆｉｃａｔｉｏｎ ,ｏｒｍｏｂｉｌｉｚｉｎｇｔｈｅＮＡＰＬｐｈａｓｅ (Ｋｉｌｅ ,1989;Ｅｄｗａｒｄｓ,1991;Ｇｕｈａ ,1998ａ ;Ｋｏ ,1998;Ｚｉｍｍｅｒｍａｎ ,1999;Ｂｅｔｔａｈａｒ,1999;Ｗｉｌｌｓｏｎ ,1999;Ｐａ…     

A comparative study of US EPA 1996 and 1999 emission inventories in the west Gulf of Mexico coast region, USA

Emission inventory is one of the required inputs to air quality models. To assist in the urban and regional modeling efforts, United States Environmental Protection Agency (EPA) has compiled a National Emission Inventory (NEI) for criterion pollutants, and the precursors of ozone and particulate matter (PM). In December 2002, EPA released the 1999 NEI estimates (NEI99), which represent the most recent national emission data. However, the data sets are not in model-ready format for air quality simulations. This present work converts the NEI99 Final Version 2 data sets into Inventory Data Analyzer (IDA) format and processes the data using the Sparse Matrix Operator Kernel Emissions (SMOKE) modeling system to generate a gridded emission inventory in a domain covering the west Gulf Coast Region, USA. The spatial and diurnal emission characteristics of the gridded emission inventories are then assessed and compared with those of the National Emission Trend 1996 (NET96). The NEI99 database contains more complete emission records in both area and point sources. It is also found that NEI99 data exhibit greater emissions with respect to point and mobile sources but smaller emissions with respect to area sources when compared to the corresponding gridded NET96 data in the same study domain. The most distinct differences between the NEI99 and NET96 databases are CO emission of mobile sources, SO2 emissions of point sources, and VOC/PM/NH3/NOx emissions of area and non-road sources. The gridded NEI99 data show low VOC/NOx ratios (<2-5) in the urban areas of the study domain.     

Assessment of control strategies for reducing volatile organic compound emissions from the polyvinyl chloride wallpaper production industry in Taiwan

This study attempts to assess the effectiveness of control strategies for reducing volatile organic compound (VOC) emission from the polyvinyl chloride (PVC) wallpaper production industry. In Taiwan, methyl ethyl ketone, TOL, and cyclohexanone have comprised the major content of solvents, accounting for approximately 113,000 t/yr to avoid excessive viscosity of plasticizer dioctyl phthalate (DOP) and to increase facility in working. Emissions of these VOCs from solvents have caused serious odor and worse air quality problems. In this study, 80 stacks in five factories were tested to evaluate emission characteristics at each VOC source. After examining the VOC concentrations in the flue gases and contents, the VOC emission rate before treatment and from fugitive sources was 93,000 and 800 t/yr, respectively. In this study, the semiwet electrostatic precipitator is recommended for use as cost-effective control equipment.