Analysis of recycling structures for e-waste in Vietnam

E-waste management in Vietnam poses real challenges such as the lack of specific e-waste legislation, the strong involvement of “craft villages” and the missing of monitoring data. Many issues (e.g., pollution level, generated waste, health of workers and resident living at recycling sites) lead to the limited access to these craft villages. Thus, there is no comprehensive picture on e-waste management in Vietnam available today. This research focuses on the current situation of e-waste management. Sources of e-waste, collection and treatment in Vietnam are investigated by utilizing most available sources of information (published journals, unpublished works from projects and reports from institutes, ministry) together with the interviewed data from experts, collectors, workers and especially, biggest traders in the field. Based on this information, the processes applied in Vietnam, both in the formal and informal sector, have been analyzed systematically in terms of inputs, outputs, potential emissions and related risks for workers. From these aspects, a comparison in terms of legal frameworks, collection and treatment at both formal and informal sector between Vietnam and other countries in Asian region was undertaken. Thus, major challenges of e-waste management and relatively comprehensive image of e-waste management and treatment in Vietnam have been identified.     

A novel sigma coordinate system to simulate abrupt changes of underwater terrain in a hydrodynamic model: application to Lake Mead,USA

The sigma (SIG) coordinate system in ocean circulation simulation models results inevitably in horizontal pressure gradient error. This problem also emerges in models of deep lakes or reservoirs with the same characteristics of underwater terrain mutation. SIG coordinates reflect vertical relative stratification but cannot be used to calculate horizontal pressure gradient force in places with drastic topographic changes; this results in vertical water temperature and circulation errors. In deep lakes or reservoirs, differences in water density caused by the temperature difference between upper and lower water bodies is the primary cause of thermal stratification phenomena. Lake Mead was used as a case study on steep topography based on Environmental Fluid Dynamics Code (EFDC) model in this study. SIG coordinates result in close agreement between the calibrated temperature time series at the top and middle water layers, but disparity in the bottom water layer. The error emerges in the horizontal pressure gradient error due to the SIG coordinate transformation. Neither increasing the vertical resolution nor adjusting the horizontal viscosity coefficient resolve this error. We test the sigma-zed (SGZ) coordinate which combines Z coordinate and SIG coordinate as a replacement for the SIG coordinate to find that they effectively reduce the model’s runtime and simulation efficiency. The vertical temperature distribution in SGZ coordinate mode is more accurate than the distribution in SIG coordinate mode. The Navier-Stokes horizontal gradient and advection diffusion equation results under SIG coordinates are very sensitive to the pressure gradient. The replacement also enhances resolution near the thermocline, facilitates reclosing of the water bottom and the equal sigma surface, lends significant advantages in terms of vertical temperature in the simulation for local deep water with steep terrain, and shortens runtime for 0.14 h. SGZ mixed coordinates are recommended in the simulation of deep lakes or reservoirs wherein the underwater topography is large (with abundant continuous deep trenches or reefs).

     

Mercury flows in a zinc smelting facility in South Korea

To prepare for the international mercury convention, the characteristics of mercury emissions from a zinc smelting facility in South Korea have been reviewed and a material flow analysis (MFA) has been conducted in this research. As inputs into the mercury MFA study, zinc ores and sulfuric acid were examined, whereas wastewater sludge, effluence water, spent catalyst, and emissions from the casting and roasting processes were examined as outputs. Mercury concentrations extracted from end products like zinc ingots, cadmium ingots, and sulfuric acid were then analyzed. Our results showed that the wastewater sludge discharged from the zinc smelting process had a relatively higher concentration of mercury, indicating that the concentration of mercury was further enriched in the wastewater sludge. The wastes discharged through the zinc smelting process should be thoroughly controlled, as results of the MFA showed that approximately 89 % of the mercury contained in the original input was later found in the waste. According to this study, the higher the concentration of mercury within zinc ores at the input stage, the higher is the mercury concentration found in the wastewater sludge at the output stage.     

Soot Control During the Combustion of Polystyrene

This paper describes an experimental study on the control of soot formation during the combustion of polystyrene (PS). A stable, twodimensional flame generated by using a Wolfhard-Parker type diffusion flame burner was used to simulate practical combustion situations. The combustion characteristics, effects of operating conditions on soot formation, and the effectiveness of various metallic additives as soot suppressants were investigated. It was found that soot yield could not be significantly reduced by controlling the oxidizer (air) flow rate. Increasing the O₂ mole fraction of the oxidlzer increased soot yield under typical operating conditions. However, soot yield could be greatly reduced by adding small amounts of air into the pyrolysis zone of the flame. The additional air would probably increase the combustion reaction rate while decreasing the soot precursor formation rate, thereby causing the observed effect. It was thus suggested that effective soot control could be accomplished by improving mixing between air and the PS devolatilizatlon products In practical combustion situations. The metallic additives tested in this study were the salts of Na, K, Ca, and Ba. Among these salts, Ca was the least effective in reducing soot, and K and Na were nearly equally effective. Ba was much more effective than all the others, and Its effectiveness was strongly dependent on its addition rate.     

Efficacy of vermicomposting for recycling organic portion of hospital wastes using <Emphasis Type="Italic">Eisenia fetida</Emphasis>: standardization of cow manure proportion to increase enzymatic activities and fungal biomass

Hospital wastes are infectious wastes generated in hospitals and need to be disposed in such a way that they do not spread disease. In this experiment, 5, 10, 15 and 20% cow manure (CM) were mixed with hospital wastes (HW), and mixed wastes were subjected to vermicomposting. In control treatment, only HW was used for vermicomposting. Results suggested that significantly (P ≤ 0.05) higher total nitrogen content was recorded in vermicomposts when 10% or more CM was added to HW. Higher mineralization rate (decrease in C/N ratio) and cellulase activity is probably responsible for rapid organic matter decomposition (loss of total organic carbon). Ergosterol content i.e., total fungal biomass and cellulolytic fungal population were almost constant initially, but increased in the latter stage of vermicomposting. All the vermicompost samples, prepared in this experiment, showed the absence of coliform bacteria. Therefore, it could be concluded that 10% CM addition with HW was the most economical to obtain best quality vermicompost in terms of nutrient content and microbial status.     

Lead-210 and Beryllium-7 in the Aerosol Particles Around Taiwan Off-Shore Areas

Abstract

Distributions of ²¹⁰Pb and ⁷Be in the aerosol particles of different size fractions were measured around Taiwan offshore areas from October, 1994 to October, 1995. the size distribution and abundance of the aerosol particles showed both spatial and temporal variations. the particle concentrations off northwestern Taiwan were more than twice as those off northeastern Taiwan both in November and March, and the values were much higher in November than in March for both areas. the measured particle concentrations, except for one sample with an unusually high value, ranged from 10 to 83 μOgm ^?3 in the study areas. the ²¹⁰Pb concentrations in the aerosol particles filtered from the air mass varied between 20 × 10^?3 and 72 × 10^?3 dpm m^?3 (1dpm = 0.45 pCi). the ²¹⁰Pb concentrations in the area off southwestern Taiwan appeared somewhat higher than in other areas and were probably contributed by the land air from Taiwan which contains higher ²¹⁰Pb in winter. the ²¹⁰Pb concentrations off northern Taiwan were low in November when the aerosol concentrations were high, but they were high in March when the aerosol concentrations were low.

Based on the ⁷Be monitoring records of 20 years on the aerosol particles of the island by the Taiwan Radiation Monitoring Center, the mean settling rate averaged 0.91, 0.79 and 0.68 cm s^?1, respectively, in northern, central and southern Taiwan. with these values and the ²¹⁰Pb concentrations in the aerosols, the ²¹⁰Pb flux was determined to be between 0.58 and 2.30 dpm cm^?2y^?1, with an average of 1.19 dpm cm^?2y^?1. Excluding the highest value due to its extremely high ²¹⁰Pb and aerosol concentrations, the average is reduced to 1.05 dpm cm^?2y^?1. the activity median diameters (AMD) for ²¹⁰Pb in the study areas were between 0.69 and < 0.49 μM with a mean of 0.5 öm based on ²¹⁰Pb distributions in different particle size fractions. Thus, ²¹⁰Pb was preferentially adsorbed on to the submicron particles. ⁷Be in the study areas showed a good correlation with ²¹⁰Pb in total activity although the two nucides had different sources.     

Pah characteristics in ambient air within a steel industrial complex

Ambient air samples at ten sites in an iron and steel industrial complex were collected from June to December for analyzing polycyclic aromatic hydrocarbons (PAHs). Sixteen species of PAH components in air samples were identified. The results indicate that both gaseous phase and particle‐bound PAHs at the top of the cokemaking plants are unusually high. The profiles of particle‐bound PAHs indicate that the predominant species at the top of, the coke oven batteries are those of high molecular weight components. The major components of particle‐bound PAHs at sampling sites near the fenceline, however, include the medium molecular weight components. The PAH profiles of air samples within the industrial complex show a strong similarity to those of cokemaking plant samples. The concentrations and the specific content of benzo(a)pyrene in the iron and steel industrial complex are higher than those values measured in urban area, petrochemical industry park, and open‐air burning area.     

The effect of limiting nutrient on metal toxicity to selenastrum capricornutum

Metal toxicity on selenastrum capricornutum were examined by batch culture and chemostat culture system. EC₅₀ values under nutrient‐limited condition and saturated condition were compared. The two EC_5Os differed by a factor of 10.6 for Cd in batch test, and differed by a factor of 6.5 in continuous test. Both batch and continuous test results indicate that inhibition on algal growth is more severe under nutrient‐limited conditions compared to that under near saturation conditions.

Strong correlation, as characterized by the correlation coefficient ρ, were found between the activation level (nutrient requirement) and the tolerance of microorganisms to the toxicant. ρ is equal to 0.9 for the case of Cd in batch test and 0.6 in continuous test. The theory in this study provides generally good estimations to the dose‐response relationship at limiting nutrient conditions. The study indicate that nutrient conditions constitute an important factor in algal toxicity tests.     

Receptor Model Evaluation of the Southeast Michigan Ozone Study Ambient NMOC Measurements

Abstract

Large-scale studies like the Southeast Michigan Ozone Study (SEMOS) have focused attention on quantifying and spedating inventories for volatile organic compounds (VOCs). One approach for evaluating the accuracy of a VOC emission inventory is the development of a chemical mass balance (CMB) receptor model for ambient non-methane organic compound (NMOC) measurements. CMB evaluations of ambient hydrocarbon data provide a sample-specific allocation of emissions to individual source categories. This study summarizes the results of an application of the CMB model to the NMOC data from the SEMOS study. Comparison of CMB results with emission inventory values for the Detroit area show that vehicle emissions are well represented by the inventory, as are architectural coatings and coke ovens. Estimated emissions from petroleum refineries and graphic arts industries are much lower in the inventory than determined from the receptor allocation. Under-reporting of fugitive VOC emissions from petroleum refineries is an ongoing problem. Emissions from graphic arts industries are underestimated in the inventory partly because of the broad characterization of the emission factor (i.e., mass emitted/capita), which may be less useful when specific locations and days are under consideration. This study also demonstrates the effectiveness of the CMB approach when used prospectively to track the implementation of emission control strategies. While vehicle emission concentrations were unchanged from 1988 to 1993, measurement-based CMB results suggest a decrease in evaporative emissions during this time period resulting from Reid vapor pressure (RVP) reductions (from 11.0 psi in 1988 to 8.6 psi in 1993) and fleet turnover. Changes in emissions from coke plants and petroleum refineries were also seen in the CMB allocations for these sources.