Utility of biological sensor tags in animal conservation

Electronic tags (both biotelemetry and biologging platforms) have informed conservation and resource management policy and practice by providing vital information on the spatial ecology of animals and their environments. However, the extent of the contribution of biological sensors (within electronic tags) that measure an animal's state (e.g., heart rate, body temperature, and details of locomotion and energetics) is less clear. A literature review revealed that, despite a growing number of commercially available state sensor tags and enormous application potential for such devices in animal biology, there are relatively few examples of their application to conservation. Existing applications fell under 4 main themes: quantifying disturbance (e.g., ecotourism, vehicular and aircraft traffic), examining the effects of environmental change (e.g., climate change), understanding the consequences of habitat use and selection, and estimating energy expenditure. We also identified several other ways in which sensor tags could benefit conservation, such as determining the potential efficacy of management interventions. With increasing sensor diversity of commercially available platforms, less invasive attachment techniques, smaller device sizes, and more researchers embracing such technology, we suggest that biological sensor tags be considered a part of the necessary toolbox for conservation. This approach can measure (in real time) the state of free‐ranging animals and thus provide managers with objective, timely, relevant, and accurate data to inform policy and decision making.     

Atmospheric Factors Influencing Daily Sulfate Concentrations in Chicago Air

Abstract

Confidence interval construction for central tendency is a problem of practical consequence for those who must analyze air contaminant data. Determination of compliance with relevant ambient air quality criteria and assessment of associated health risks depend upon quantifying the uncertainty of estimated mean pollutant concentrations. The bootstrap is a resampling technique that has been steadily gaining popularity and acceptance during the past several years. A potentially powerful application of the bootstrap is the construction of confidence intervals for any parameter of any underlying distribution. Properties of bootstrap confidence intervals were determined for samples generated from lognormal, gamma, and Weibull distributions. Bootstrap t intervals, while having smaller coverage errors than Student's t or other bootstrap methods, under-cover for small samples from skewed distributions. Therefore, we caution against using the bootstrap to construct confidence intervals for the mean without first considering the effects of sample size and skew. When sample sizes are small, one might consider using the median as an estimate of central tendency. Confidence intervals for the median are easy to construct and do not under-cover. Data collected by the Northeast States for Coordinated Air Use Management (NESCAUM) are used to illustrate application of the methods discussed.     

Comparison of Air Pollutant Emissions from Vaporizing and Air Atomizing Waste Oil Heaters

Information presented in this paper is directed to individuals concerned with emissions from combustion of waste crankcase oil for space heating. Studies were performed to characterize gaseous and particulate emissions and vaporizing pot solid residues resulting from the combustion of waste crankcase oil. Two types of waste oil burners were tested. One was a vaporizing oil burner rated at 35.2 kW (120,000 Btu/h heat input), and the other was an air atomizing oil burner rated at 73.3 kW (250,000 Btu/h heat input). Except for NO_X and SO_X, gaseous emissions were similar to those from conventional distillate oil combustion. NO_X and SO_X emissions were higher due to higher fuel nitrogen and sulfur concentrations. Waste oil from automotive use showed higher inorganic levels than crankcase oil used for truck engine lubrication. Both burner types discharged high levels of metallic species, but the air atomizing unit had much higher stack emission levels than did the vaporizing pot system. Also, particulate loading levels were an order of magnitude higher for the air atomizing burner than for the vaporizing pot burner when firing the waste oils. However, the vaporizing pot burner generated a waste residue containing the majority of its elemental emissions. Elements which exceeded threshold limit values for one or both heaters were cadmium, chromium, cobalt, copper, iron, lead, nickel, phosphorus, and zinc. However, the nickel and much of chromium appeared to be a sampling artifact caused by the stainless steel sampling system.     

Using a reduced Common Representative Intermediates (CRIv2-R5) mechanism to simulate tropospheric ozone in a 3-D Lagrangian chemistry transport model

A reduced chemical scheme (CRIv2-R5) which describes ozone formation from the tropospheric degradation of methane and 22 emitted non-methane hydrocarbons and oxygenated volatile organic compounds has been applied in a global-3D chemistry transport model (STOCHEM). The scheme, which contains 220 species in 609 reactions, has been used to simulate ozone and its precursors for the meteorological year of 1998 and the results have been compared with those from STOCHEM runs with its original chemistry. Compared with the original chemistry scheme, the degradation of a larger number of more reactive VOCs in the CRI scheme results in the formation (and their consequent transportation) of more NO_x active reservoirs thus leading to formation of more ozone away from land-based sources. Conversely, the more reactive VOCs also lead to greater removal of OH in continental areas and greater formation of OH in marine environments. STOCHEM run with the CRI scheme simulates more ozone (by up to 10 ppb), which results in better agreement with observed vertical ozone profiles. The CRI scheme transforms the globally and annually integrated ozone budget for the considered year in STOCHEM from a net loss of ?55 Tg yr^?1 to a net gain of +50 Tg yr^?1.     

Compatible Blends of Zein and Polyvinylpyrrolidone

Blends of zein and polyvinylpyrrolidone (PVP) were compared based on their tensile properties, thermal properties and morphology. Zein was blended with polyvinylpyrrolidone of varying molecular weights (10, 55, and 1,300 kDa) and films were cast from ethanol solutions. Films cast using the higher molecular weight polymers showed an improvement in tensile strength, up to a 24% increase, compared to control. Differential scanning calorimetry data for the blends showed single T_m and T_g values of an intermediate value between those of zein and PVP control samples. Field emission scanning electron microscopy images show no obvious inhomogeneities, and confocal fluorescence microscopy showed no decreased uniformity in the PVP/zein films compared to control. Electrospun fibers of the zein/PVP blends were also obtained. These findings suggest that zein and polyvinylpyrrolidone combine to form a compatible blend, the first such blend of zein with a synthetic polymer.     

The Effect of Shoreline Recreational Angling Activities on Aquatic and Riparian Habitat Within an Urban Environment: Implications for Conservation and Management

There is growing concern that recreational shoreline angling activity may negatively impact littoral and riparian habitats independent of any direct or indirect influences of fish harvest or fishing mortality through mechanisms such as disturbance (e.g., trampling, erosion) and pollution (e.g., littering). We sampled a suite of aquatic and terrestrial variables (i.e., water quality, aquatic and terrestrial macrophytes, soil compaction, anthropogenic refuse) at 14 high shoreline angling-activity sites (identified by way of interviews with conservation officers and angling clubs) within an urban area (Ottawa, Canada). For each high angling-activity site, a nearby corresponding low angling-activity site was sampled for comparison. We found that the percentage of barren area and soil compaction were greater in areas of high angling activity compared with areas that experienced relatively low angling activity. In addition, terrestrial and aquatic macrophyte density, height, and diversity were lower at high angling-activity sites. Angling- and non-angling-related litter was present in large quantities at each of the high angling-activity sites, and comparatively little litter was found at low angling-activity sites. Collectively, these findings indicate that shoreline angling does alter the riparian environment, contributing to pollution and environmental degradation in areas of high angling intensity. With growing interest in providing urban angling opportunities and in response to increasing interest in developing protected areas and parks, a better understanding of the ecologic impacts of shoreline angling is necessary to address multiuser conflicts, to develop angler outreach and educational materials, and to optimize management of angling effort to maintain ecologic integrity of riparian and aquatic ecosystems.     

Responses of marine fouling communities to sewage abatement in Kaneohe Bay,Oahu, Hawaii

The development of marine fouling communities was followed as part of a sewage abatement study in Kaneohe Bay (Oahu, Hawaii). Panels immersed near the outfall during sewage discharge were dominated by dense mats of blue-green algae and diatoms. This mat was significantly lighter at this station when sewage did not flow into the bay, and it never developed on panels within the same sector of the bay but away from the influence of the outfall. Taxonomic diversity, and the frequency of filamentous algae and the serpulidHydroides elegans were reduced near the outfall during discharge. It is suggested that this reduction in diversity and abundance of certain key foulers is due to competitive exclusion by the dense blue-green and diatom mats, and is not a direct effect of the sewage effluent.     

A COMPARISON OF PHOSPHORUS AND WATER CONTRIBUTIONS BY SNOWFALL AND RAIN IN NORTHEAST OHIO1

ABSTRACT A record snowfall of 55.8 centimeters occurred on December 1 and 2, 1974 in Portage County, Ohio. An early winter thaw melted the greater part of the snow by December 22, 1974, and a two-day rain fell from December 23 to December 25. These weather events provided an opportunity to compare snowmelt and rainfall contribution to runoff and phosphorus loading to the Twin Lakes Watershed. Phosphorus concentrations of the snow and rain were determined. Six lake inflows and two lake outflows were measured daily for volume and phosphorus concentration. The snow added 217,000 cubic meters of water and 2.2 kilograms of total phosphorus to the watershed. The rain added 74,000 cubic meters of water and 1.6 kilograms of total phosphorus. Total water discharge from the watershed during December was 244,537 cubic meters and total phosphorus output was 20.3 kilograms. The snow provided 49.9% of the discharge and 8% of the phosphorus whereas the rainfall contributed 28% of the discharge and 6% of the phosphorus. These results indicate that while snow is a significant source of water, it is not a large source of phosphorus. The greatest contribution of phosphorus comes from fine sediment carried by storm runoff.     

Floristic variation in plant communities on metalliferous mining residues in the northern and southern Pennines,England

Vegetation and soil surveys were conducted on metalliferous mine wastes in the northern and southern Pennines of England. Analyses of vegetation composition in relation to soil chemical variation were performed. Ordination analysis facilitated the detection of groups of co-occurring species which are characteristic of types of metal-contaminated soil. The results of regression analysis implied the importance of soil pH and concentration of available lead or zinc, depending upon region, in determining species distributions. A strong interactive effect was evident between soil phosphorus and zinc content in influencing species distributions in the southern Pennines sample.Regional similarities in the vegetation of apparently similar metalliferous soils existed. The unusually high species richness of some soils was associated with relatively low concentrations of heavy metals. Many species of relatively floristically-rich wastes were also colonists of surrounding grasslands or woodland. This indicated the potential importance of propagule availability and capability for rapid establishment on bare or unstable ground. Mechanisms of physiological stress avoidance, rather than heavy-metai tolerance, may explain the occurrence of non-metallophytes on soils contaminated with lead and zinc.