In situ stabilization of trace metals in a copper-contaminated soil using P-spiked Linz-Donawitz slag

Purpose  

A former wood exploitation revealing high Cu and As concentration of the soils served as a case study for assisted phytoextraction.     

Seasonal variations of hydrophobic organic contaminant concentrations in the water-column of the Seine Estuary and their transfer to a planktonic species Eurytemora affinis (Calanoïda, copepoda). Part 1: PCBs and PAHs

Hydrophobic organic contaminants (HOC) (i.e. PAHs and PCBs) were measured in the water column and in Eurytemora affinis samples from the Seine Estuary collected from November 2002 to February 2005. Results showed seasonal variations of both total PCB and PAH levels in the suspended particulate matter (SPM) and in the copepods with maximum levels during winter times. PAH and PCB concentrations in the SPM ranged from 499 to 5819ngg(-1) and from 58 to 463ngg(-1), respectively. Phenanthrene, pyrene and benzo[b+j+k]fluoranthene (B[b+j+k]F) were the predominant PAH compounds in the water column, while CB 101, 118, 153 and 138 were the most abundant PCB congeners. PCBs and PAHs bioaccumulated by E. affinis (EA) varied between 383 and 1785ngg(-1) and 165-3866ngg(-1). CB101, 153, 138 and B[b+j+k] were, respectively, the major compounds of PCB and PAH fingerprints in EA. Thereby, the copepods could reach high accumulation factor (ACF) (91000 for PCBs and 17000 for PAHs). The principal component analyses of contaminant concentrations and environmental parameter datasets distinguished two groups of copepods. The winter time cluster, with high percentage of adult copepods, which bioaccumulated the highest PCB and PAH body-burdens, and the second cluster with juveniles showing the lowest HOC concentrations. Thus, PAH and PCB concentrations in EA exhibited significant correlations with the percentage of adults making up the samples.     

A simplified model for the steady-state biofilm-activated sludge reactor

A simplified mathematical model is proposed to describe the steady-state completely mixed biofilm-activated sludge reactor (hybrid reactor). The model is derived based on Monod kinetic expressions and the Fickian diffusion law in biofilm. In addition, it considers all the essential concepts that describe the two types of growth (suspended and attached) and the competition between them for limiting substrate. Also the present study has been extended to investigate simple and accurate mathematical expressions for describing the substrate diffusion in biofilm (J). The expression for substrate flux has an explicit solution, which may be useful in the proposed model and many other applications. The application of the model for the hybrid system has been explained for a given set of data and verified by comparison with another solution. Also the model was applied to experimental results for a trace level of suspended biomass concentration (X). It was found that the biofilm flux (J) is the key factor in the model prediction, hence the accuracy of the model output is influenced by the accuracy of J. Compared with other solutions for such systems the model is simple, easy to use, and provides an accurate tool for describing such systems based on fundamental principles.     

The fate of prazosin and levonorgestrel after electrochemical degradation process: Monitoring by-products using LC-TOF/MS

Prazosin (PRZ) and levonorgestrel (LNG) are widely used as an anti-disease drugs due to their biological activity in the human body. The frequent detection of these compounds in water samples requires alternative technologies for the removal of both compounds. After electrochemical degradation of PRZ and LNG, the parent compounds could be completely removed after treatment, but the identification and characterization of by-products are necessary as well. In this study, the effects of NaCl concentration and applied voltage were investigated during the electrochemical degradation process. The results revealed that the increase of NaCl concentration and applied voltage could promote the generation of hypochlorite OCl? and then enhance the degradation of PRZ and LNG. After initial study, 6 V and 0.2 g NaCl were selected for further experiments (96% and 99% removal of PRZ and LNG after 40 min, respectively). Energy consumption was also evaluated and calculated for PRZ and LNG at 3, 6 and 8 V. Solid phase extraction (SPE) method plays an important role in enhancing the detection limit of by-products. Furthermore, characterization and identification of chlorinated and non-chlorinated by-products were conducted using an accurate liquid chromatography-time of flight/mass spectrometry LC-TOF/MS instrument. The monitoring of products during the electrochemical degradation process was performed at 6 V and 0.2 g NaCl in a 50 mL solution. The results indicated that two chlorinated products were formed during the electrochemical process. The toxicity of by-products toward E. coli bacteria was investigated at 37°C and 20 hr incubation time.     

Mitigation of antibiotic resistance using probiotics,prebiotics and synbiotics. A review

Environmental Chemistry Letters - Multi-drug resistant microbes are becoming a serious threat to health security and the economy. Antibiotic resistance results from the overuse of antibiotics for...     

An individual-based model to study the reproduction of egg bearing copepods: Application to Eurytemora affinis (Copepoda Calanoida) from the Seine estuary,France

Limited empirical studies have elucidated the daily egg production and associated reproductive processes of egg bearing copepod. Herein, we present an individual-based model which constitutes a realistic representation of the reproduction in egg bearing copepods. The model has been parameterized using an extensive set of experimental data obtained from the literature and from the laboratory and field experiments on the estuarine copepod Eurytemora affinis. The proposed model takes into account the adult female longevity, the clutch size and interclutch duration, which is a function of egg maturation time and latency time required by the female after egg hatching to produce a new clutch. The embryonic development time and hatching success are also taken into account. The effect of temperature on the means and variances of above-mentioned reproductive parameters has been also incorporated. A multi agent system based generic platform “Mobidyc” has been used to generate and calibrate the model. The model demonstrates the reproductive parameters of females of E. affinis which is validated through individual based experiments. Temperature specific simulations provide a dynamical explanation of temperature effect on the cumulative egg production. The daily survival principally affects the number of clutches produced per female during its life span. The results obtained in the present study by combining temperature and survival effects reveal the relatively greater importance of the first factor on the daily egg production of egg-carrying copepods. The present model is generic and hence easily applicable to other animals with comparable reproductive strategy.     

Sludge age, stability, and safety factor for the biofilm-activated sludge process reactor

The average sludge age (theta(c)) of the activated sludge process (ASP)-biofilm were developed and verified experimentally. In addition, the stability and safety factor were investigated against theta(c). through a series of curves. These curves are important to explain, in concept, the function of the hybrid system under different values of theta(c). The proposed curves of this study are simple and can be modified for any specified wastewater. The definition of theta(c) of ASP was found to be applicable to the hybrid system after including the biofilm. A ratio ranging from 70 to 80% of the total mass of biofilm may be used in the definition of theta(c). to give close results with the experimental values. Furthermore, the minimum sludge age (theta(c)(M)) does not exist in the hybrid reactor because of the presence of biofilm; however, theta(c) should come down to a critical value under some specific conditions of the reactor.     

Occurence of intersexuality in a laboratory culture of the copepod Eurytemora affinis from the Seine estuary (France)

We show in this study that intersexuality can occur in the estuarine copepod Eurytemora affinis, and we reported the presence of three intersexual copepod individuals from a laboratory culture of this species from the Seine estuary conducted at low temperature (7°C). These individuals presented both female and male characteristics. The prosome size and antennules of intersex individuals were similar to those of normal females, but all the other morphological details were more similar to normal males. The appearance of the three intersex individuals in the culture at low temperature coincided with a decrease in food quality due to a feeding with Rhodomonas marina at its stationary phase. This induced a significant decrease in the mean clutch size and skewed sex-ratio in favor of males. The reduction in food quality in addition to low temperature of 7°C (which induced slow development) is suspected to be responsible of the appearance of intersex individuals. This stressful situation seems to propagate to the following two generations at low temperature in contrast to the case of the experiment at higher temperature 20°C where no intersex individual was observed. These results confirmed the role of food quality in sex determination of copepods. Moreover, the role of early developmental stages and also the consequences of stressful conditions throughout different generations were discussed.     

Coagulation of highly turbid suspensions using magnesium hydroxide: effects of slow mixing conditions

Laboratory experiments were carried out to study the effects of slow mixing conditions on magnesium hydroxide floc size and strength and to determine the turbidity and total suspended solid (TSS) removal efficiencies during coagulation of highly turbid suspensions. A highly turbid kaolin clay suspension (1,213?±?36 nephelometric turbidity units (NTU)) was alkalized to pH 10.5 using a 5 M NaOH solution; liquid bittern (LB) equivalent to 536 mg/L of Mg²⁺ was added as a coagulant, and the suspension was then subjected to previously optimized fast mixing conditions of 100 rpm and 60 s. Slow mixing speed (20, 30, 40, and 50 rpm) and time (10, 20, and 30 min) were then varied, while the temperature was maintained at 20.7?±?1 °C. The standard practice for coagulation-flocculation jar test ASTM D2035-13 (2013) was followed in all experiments. Relative floc size was monitored using an optical measuring device, photometric dispersion analyzer (PDA 2000). Larger and more shear resistant flocs were obtained at 20 rpm for both 20- and 30-min slow mixing times; however, given the shorter duration for the former, the 20-min slow mixing time was considered to be more energy efficient. For slow mixing camp number (Gt) values in the range of 8,400–90,000, it was found that the mixing speed affected floc size and strength more than the time. Higher-turbidity removal efficiencies were achieved at 20 and 30 rpm, while TSS removal efficiency was higher for the 50-rpm slow mixing speed. Extended slow mixing time of 30 min yielded better turbidity and TSS removal efficiencies at the slower speeds.