Environmental forensic investigation of the air pollution from a cement manufacturing unit

Abstract

Cement manufacturing is a process that results in the emission of significant quantities of suspended particulate matter (SPM) to the ambient air. An environmental forensic investigation was carried out in the surroundings of a major cement manufacturing unit at a place called Coimbatore in the southern Indian state of Tamil Nadu. The investigation was carried out to identify the contribution of the cement manufacturing unit to the SPM concentration of the surrounding air environment. The sampling points’ selection and sample collection were done following the principles outlined in the INTERPOL Manual for Pollution Crime Forensic Investigation. On-site monitoring of the air samples was carried out using Mini Laser Aerosol Spectrometer (GRIMM, Mini-LAS Model 11R). The instrument was capable of measuring particles ranging from 0.25 to 32 µm and classifying them into 31 size channels. The test results at majority of the monitoring locations were well above the limits specified in the National Ambient Air Quality Standards of India. Microscopic studies of the dust samples were carried out for surface texture and particle shape. The spatial distribution of particles was analysed using geographic information system (GIS) for the visual identification of the extent of the pollution by keeping the cement factory as the focal point. The results from the GIS and microscopic analysis established the role of the cement factory in the particulate matter pollution of its surroundings, specifically in the areas North-West of the factory. The successfully adopted procedure can serve as a guideline for the environmental forensic investigation of similar pollution incidences.     

Asymmetric investigation to track the effect of urbanization,energy utilization,fossil fuel energy and CO2 emission on economic efficiency in China: another outlook

Environmental Science and Pollution Research - The accelerated urbanization in China was already coupled with a steadily increasing demand for energy usage. The present study major aim was to...     

WASTE WATER DISPOSAL THROUGH A COASTAL AQUIFER1

ABSTRACT: Feasibility of disposing treated sewage in wells sunk into a partially confined coastal limestone aquifer at Waimanalo in the island of Oahu was investigated using an electric analog model. Electric analog modeling was preferred over digital modeling because of ease with which tides could be generated at the ocean boundary in the form of sinusoidal waves. The results of model operation showed that high permeability, low storativity, and the presence of ocean render the Waimanalo aquifer highly suitable for the disposal of waste water in deep wells. Since the quality of water in the aquifer is already unsuitable for municipal, industrial, or agricultural use, waste water injection will not result in any loss of fresh water supply source to the island. It is also believed that the cost of waste water disposal through the aquifer will be considerably less than that through an ocean outfall. During model development it was discovered that electric analog models can help prepare certain graphs which can be useful for aquifer analysis without any further use of the model.     

Control of combustion-generated nitrogen oxides by selective non-catalytic reduction

Controlling nitrogen oxides (NO(x)) emissions is becoming a daunting technical challenge as increasingly strict emission limits are being imposed. The stringent regulations have prompted the innovation and characterization of NO(x) control technologies suitable for various applications. This paper presents a review on NO(x) removal techniques with particular reference to selective non-catalytic reduction (SNCR) technology. This includes initially how SNCR emerged as a technology along with a comparison with other relevant technologies. A review of various features related to selective non-catalytic gas phase injection of ammonia and ammonium salts (as reducing agent) is presented. The use of urea solution as a reducing agent and its performance in laboratory and pilot scale tests as well as large-scale applications is also discussed. Use of cyanuric acid as a potential reducing agent is also presented. The underlying reaction mechanisms have been reviewed for ammonia, urea and cyanuric acid for the explanation of various observations. Computational fluid dynamics (CFD) modeling as applied to SNCR is also presented. Subsequently the use of SNCR coupled with other in-combustion and post-combustion NO(x) control techniques is elaborated. Additionally, a two-stage NO(x) removal strategy to control un-reacted ammonia slip and to improve overall efficiency is discussed. At the end a summary is given which highlights various areas needing further research.     

GROUND WATER SIMULATION USING A ONE DIMENSIONAL FLOW MODEL1

ABSTRACT: In projects involving ground water problems, dependence on the mathematical modeling of the ground water flow phenomena is inescapable. At present, two dimensional flow models, which require tremendous amounts of computer time and storage, are generally used. When such bulky models are used for planning purposes, the two requirements (computer time and storage) can severely limit the number of alternatives that can be considered. A simple quantity and quality simulation model is developed here which requires considerably less computer time and storage and gives reasonably accurate results. The model was applied to simulate a ground water basin in San Luis Rey River in Southern California. The results were compared with those obtained by a USGS model. It was found that the simple model gave results which were consistentaly within five percent of the USGS model results, while the requirements on computer time and storage were drastically reduced.     

Structural characterization and visible light activated photocatalytic ability of glass–ceramics prepared from municipal solid waste

Journal of Material Cycles and Waste Management - The relationship between local structure and visible-light-activated photocatalytic ability of glass–ceramics prepared from Municipal Solid...     

Nanoscience in food and agriculture: research,industries and patents

High population rise and climate changes are increasing issues of agricultural production and food safety. Nanotechnology is finding revolutionary applications to improve agricultural and food systems, notably for better crop production and food preservation. Here we review research, industrial and patent trends of nanoscience in food and agriculture. In a literature survey, we found 44.6% publications in the nano-food research area during the years 2013–2015 and 59.09% publications in the nano-agriculture research area during 2012–2015. USA is leading in the development of nanotechnology firms with a maximum share of 75.5% of the total firms, followed by Germany and France with 8.10 and 4.74%, respectively. USA is leading in the nano-food research with 22 granted patents, whereas China is placed first in nano-agriculture research with 28 granted patents during assessment years 2011–2015. Nano-food research focused mainly on nano-food packaging with 76.84% contributions, whereas in nano-agriculture research, focus has been on nano-fertilizers with 90% contributions. Germany, France, Korea, Italy, Czech Republic, Slovenia and Slovak republic have more than 20% of dedicated nanotechnology firms. A growth of about 45% in nano-food patents has been observed for USA during 2011–2015, and China is leading in the nano-agriculture patents with an increase of 60.7% during 2012–2015.     

Effects of NO,NO<Subscript>2</Subscript>, CO and SO<Subscript>2</Subscript> on NO oxidation over Pt/TiO<Subscript>2</Subscript> for hybrid fast SCR process

The selective catalytic reduction (SCR) rate of NO with N-containing reducing agents can be enhanced considerably by converting part of NO into NO₂. The enhanced reaction rate is more pronounced even at lower temperatures by using an equimolar mixture of NO and NO₂ (fast SCR reaction). The oxidation characteristics of NO over catalyst Pt/TiO₂ have been determined in a fixed bed reactor (8 mm-ID) with different concentrations of oxygen, nitric oxide and nitrogen dioxide in the presence of 8% water. The conversion of NO to NO₂ increases with increasing oxygen (O₂) concentration from 3 to 12%, but it levels off at higher O₂ concentrations. The NO conversion to NO₂ decreases with increasing NO concentration and it also decreases by an addition of NO₂ in the feed stream. Therefore, the oxidation of NO over Pt/TiO₂ catalyst could be auto-inhibited by the reaction product of NO₂. The effects of CO and SO₂ on NO oxidation characteristics have also been determined. In fact, the presence of SO₂ significantly suppresses oxidation of NO but due to the less stability of sulfate on anatase structure in TiO₂, it becomes less significant. On the other hand, the presence of CO increases NO oxidation significantly due to the auto-inhibition effect by CO. Moreover, the effect of SO₂/CO on NO oxidation has also been determined and it was observed that NO oxidation decreases with the increase in SO₂/CO ratio.