Vulnerability of agro-ecological zones in India under the earth system climate model scenarios

India being a developing economy dependent on climate-sensitive sector like agriculture is highly vulnerable to impacts of global climate change. Vulnerability to climate change, however, differs spatially within the country owing to regional differences in exposure, sensitivity, and adaptive capacity. The study uses the Hadley Centre Global Environment Model version 2-Earth System (HadGEM-ES) climate projections to assess the dynamics in vulnerability across four climate change exposure scenarios developed using Representative Concentration Pathways (RCPs). The analysis was carried out at subnational (district) level; the results were interpreted and reported for their corresponding agro-ecological zones. Vulnerability of each district was quantified using indicators capturing climatic variability, ecological and demographic sensitivity, and socio-economic capacity. Our analysis further assigns probabilities to vulnerability classes of all the 579 districts falling under different agro-ecological zones. The results of the vulnerability profile show that Western plains, Northern plains, and central highlands of the arid and semi-arid agro-ecological zones are the most vulnerable regions in the current scenario (1950–2000). In the future scenario (2050), it extends along districts falling within Deccan plateau and Central (Malwa) highlands, lying in the arid and semi-arid zones, along with regions vulnerable in the current scenario, recording the highest vulnerability score across all exposure scenarios. These regions exhibit highest degree of variation in climatic parameters, ecological fragility, socio-economic marginality, and limited accessibility to resources, generating conditions of high vulnerability. The study emphasizes on the priority to take up adaptive management actions in the identified vulnerable districts to not only reduce risks of climate change, but also enhance their inherent capacity to withstand any future changes in climate. It provides a systematic approach to explicitly identify vulnerable regions, where regional planners and policy makers can build on existing adaptation decision-making by utilizing an interdisciplinary approach in the context of global change scenario.     

Landscape approach for quantifying land use land cover change (1972–2006) and habitat diversity in a mining area in Central India (Bokaro, Jharkhand)

The rate and intensity of land use land cover (LULC) change has increased considerably during the past couple of decades. Mining brings significant alterations in LULC specifically due to its impact on forests. Parts of Central India are well endowed with both forests and minerals. Here, the conflict between human interests and nature has intensified over time. Monitoring and assessment of such conflicts are important for land management and policy making. Remote sensing and Geographical Information System have the potential to serve as accurate tools for environmental monitoring. Understanding the importance of landscape metrics in land use planning is challenging but important. These metrics calculated at landscape, class, and patch level provide an insight into changing spatiotemporal distribution of LULC and ecological connectedness. In the present study, geospatial tools in conjunction with landscape metrics have been used to assess the impact of coal mining on habitat diversity. LULC maps, change detection analysis, and landscape metrics have been computed for the four time periods (1972, 1992, 2001, and 2006). There has been a significant decline in forest cover especially of the Sal-mixed forests, both in area as well as quality, due to flouted mining regulations. Reclamation of mined lands has also been observed in some of the areas since 2001.     

Biological Removal of Gaseous Ammonia in Biofilters: Space Travel and Earth-Based Applications

ABSTRACT

Gaseous NH₃ removal was studied in laboratory-scale biofilters (14-L reactor volume) containing perlite inoculated with a nitrifying enrichment culture. These biofilters received 6 L/min of airflow with inlet NH₃ concentrations of 20 or 50 ppm, and removed more than 99.99% of the NH₃ for the period of operation (101, 102 days). Comparison between an active reactor and an autoclaved control indicated that NH₃ removal resulted from nitrification directly, as well as from enhanced absorption resulting from acidity produced by nitrification. Spatial distribution studies (20 ppm only) after 8 days of operation showed that nearly 95% of the NH₃ could be accounted for in the lower 25% of the biofilter matrix, proximate to the port of entry. Periodic analysis of the biofilter material (20 and 50 ppm) showed accumulation of the nitrification product NO₃ ^- early in the operation, but later both NO₂ ^- and NO₃ ^- accumulated. Additionally, the N-mass balance accountability dropped from near 100% early in the experiments to ~95 and 75% for the 20- and 50-ppm biofilters, respectively. A partial contributing factor to this drop in mass balance accountability was the production of NO and N₂O, which were detected in the biofilter exhaust.     

Interaction Effects of Metals and Salinity on Biodegradation of a Complex Hydrocarbon Waste

Abstract

The presence of high levels of salts because of produced brine water disposal at flare pits and the presence of metals at sufficient concentrations to impact microbial activity are of concern to bioremediation of flare pit waste in the upstream oil and gas industry. Two slurry-phase biotreatment experiments based on three-level factorial statistical experimental design were conducted with a flare pit waste. The experiments separately studied the primary effect of cadmium [Cd(II)] and interaction effect between Cd(II) and salinity and the primary effect of zinc [Zn(II)] and interactioneffect between Zn(II) and salinity on hydrocarbon biodegradation. The results showed 42–52.5% hydrocarbon removal in slurries spiked with Cd and 47–62.5% in the slurries spiked with Zn. The analysis of variance showed that the primary effects of Cd and Cd–salinity interaction were statistically significant on hydrocarbon degradation. The primary effects of Zn and the Zn-salinity interaction were statistically insignificant, whereas the quadratic effect of Zn was highly significant on hydrocarbon degradation. The study on effects of metallic chloro-complexes showed that the total aqueous concentration of Cd or Zn does not give a reliable indication of overall toxicity to the microbial activity in the presence of high salinity levels.     

Analysis of micro-cracks on machined surfaces in dry electrical discharge machining

Micro-crack formation in the heat affected zone in EDM is a common phenomenon and many measures have been perceived to minimize their occurrence. This paper presents a comprehensive and quantitative analysis of micro-crack formation, in terms of length, number and orientation of micro-cracks formed on the machined surfaces. The influence of processing conditions on crack formation is studied using the observations under scanning electron microscope (SEM). The results indicate that the micro-crack formation is the best represented in terms of average crack length. Statistical analysis of the results shows that pulse off-time (T_off), current (I), voltage (V) and electrode rotation speed (N) significantly influence the average crack length in both wall and bottom regions of the machined hole. In dry EDM, micro-crack formation occurs due to segregation of elements in the work surface and inter-diffusion of elements between work, and shield. A comparison of crack formation with the liquid dielectric EDM shows that average length and number density of micro-cracks were lower in the dry EDM than those in the liquid dielectric EDM.     

Implications of climate change on mitigation potential estimates for forest sector in India

Climate change is projected to impact forest ecosystems, including biodiversity and Net Primary Productivity (NPP). National level carbon forest sector mitigation potential estimates are available for India; however impacts of projected climate change are not included in the mitigation potential estimates. Change in NPP (in gC/m²/yr) is taken to represent the impacts of climate change. Long term impacts of climate change (2085) on the NPP of Indian forests are available; however no such regional estimates are available for short and medium terms. The present study based on GCM climatology scenarios projects the short, medium and long term impacts of climate change on forest ecosystems especially on NPP using BIOME4 vegetation model. We estimate that under A2 scenario by the year 2030 the NPP changes by (−5) to 40% across different agro-ecological zones (AEZ). By 2050 it increases by 15% to 59% and by 2070 it increases by 34 to 84%. However, under B2 scenario it increases only by 3 to 25%, 3.5 to 34% and (−2.5) to 38% respectively, in the same time periods. The cumulative mitigation potential is estimated to increase by up to 21% (by nearly 1 GtC) under A2 scenario between the years 2008 and 2108, whereas, under B2 the mitigation potential increases only by 14% (646 MtC). However, cumulative mitigation potential estimates obtained from IBIS—a dynamic global vegetation model suggest much smaller gains, where mitigation potential increases by only 6% and 5% during the period 2008 to 2108.     

Bright photophase accelerates re-entrainment after experimental jetlag in Drosophila

The efficacy of bright photophase (BP) in accelerating the re-entrainment of Drosophila biarmipes rhythm following 8?h phase advance and delay of light–dark (LD) cycle was examined by subjecting the flies to 24?h LD cycles with dim photophase (DP) at 30?lx and BP at 300?lx. Re-entrainment was analysed by using the activity onset, activity offset and the duration of activity. Following LD advance or delay, the BP flies re-entrained faster than the DP flies which was attributed to the enhanced zeitgeber strength of BP. Nevertheless, the re-entrainment was a protracted process even in the BP flies since the activity offsets underwent more transients than the activity onsets. Thus, this study demonstrates that the BP accelerates the re-entrainment in D. biarmipes. It, however, also reveals that the re-entrainment is a prolonged process when the activity onset and offset are regarded as the rhythm markers.     

Analysis of machined surface quality in a single-pass of ball-end milling on Inconel 718

The ball-end milling process is widely used for generating three-dimensional sculptured surfaces with definite curvature. In such cases, variation of surface properties along the machined surface curvatures is not well understood. Therefore, this paper reports the effect of machining parameters on the quality of surface obtained in a single-pass of a ball-end milling cutter with varying chip cross-sectional area. This situation is analogous to generation of free form cavities, pockets, and round fillets on mould surfaces. The machined surfaces show formation of distinct bands as a function of instantaneous machining parameters along the periphery of cutting tool edge, chip compression and instantaneous shear angle. A distinct variation is also observed in the measured values of surface roughness and micro-hardness in these regions. The maximum surface roughness is observed near the tool tip region on the machined surface. The minimum surface roughness is obtained in the stable cutting zone and it increases towards the periphery of the cutter. Similar segmentation was observed on the deformed chips, which could be correlated with the width of bands on the machined surfaces. The sub-surface quality analysis in terms of micro-hardness helped define machining affected zone (MAZ). The parametric effects on the machining induced shear and residual stresses have also been evaluated.     

Analysis of Wet Precipitation of Air Pollutants in Mumbai (India)

Bulk precipitation samples at Mumbai (India) were collectedduring the monsoon seasons of 1991 to 1996 and analysed forionic concentrations using an Ion Chromatograph DIONEX model100. The variability of sulphate to nitrate ratio in rainwaterfluctuates in a wide range from 1.5 to 20 and governed by thesulphate concentrations in the sample. The regression analysisof the data reveals that in the bulk precipitation at Mumbai, SO₄ ^2- is becoming increasingly important relative toNO₃ ^-. The role of meteorological influences onscavenging of air pollutants by rain water has been tried toexplain the phenomena. The computed wet deposition rates for Sand N during 1991–1996 show that the S deposition is higherthan N in all the years. There is a wide fluctuation indeposition rates of S ranging from 2 to 55 kg km² per annum.     

Climate change,risk perception,and protection motivation among high-altitude residents of the Mt. Everest region in Nepal

Mountain ecosystems are considered vulnerable to early impacts of climate change. Whether and how local residents of these areas perceive these changes, however, remain under-studied questions. By conducting a household survey in the Khumbu region of Nepal, this study assessed local residents’ experience-based perception of changes in climate trends and patterns, perceived risk, and attitudes towards climate issues. Multivariate cluster analysis based on residents’ climate change beliefs revealed three segments: “Cautious,” “Disengaged,” and “Alarmed.” A comparison of these segments along key psychosocial constructs of Protection Motivation Theory (PMT) revealed significant inter-segment differences in residents’ perception of severity, vulnerability, response efficacy, self-efficacy, and response cost associated with engaging in mitigating behavior. Results shed light on how residents of high elevation areas that are considered to be exposed to early impacts of climate change perceive the risk and intend to respond. These findings could also assist stakeholders working in other similar mountain ecosystems in understanding vulnerability and in working towards climate readiness.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01369-x) contains supplementary material, which is available to authorized users.