Environmental assessment of trace element bioaccumulation in sipunculan from seagrass and wetland sediments

This study is the first measurement of trace elements in sipunculan and their surrounding sediments. The bioaccumulation characteristics of arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), mercury (Hg), and zinc (Zn) were analyzed and compared in two sipunculan species, Sipuncula nudus and Siphonosoma vastum, which were collected from seagrass beds and wetlands in Taiwan. The sipunculan and sediment samples were analyzed using an inductively coupled plasma mass spectrometer. Both sipunculan in the wetlands and seagrass beds had a high Cu bioaccumulation mechanism. Multivariate analysis, principle component analysis, and partial least squares for discriminant analysis of trace element levels and bioaccumulation factors were used to distinguish the element distributions that corresponded to the two habitats (seagrass beds and wetlands). Different levels of certain trace elements in these two sipunculan species may result not only from the environmental factors of various habitats but also from the accumulation characteristics of various species. The As, Cd, Cr, Cu, Hg, and Zn concentrations were markedly lower in sipunculan than in other invertebrates from the adjacent polluted regions. The public health issues regarding the consumption of sipunculan are also discussed.     

Use of inert C&D materials for seawall foundation: quality control measures

The technical viability of using inert construction and demolition (C&D) materials for the construction of seawall and breakwater foundations has been established by laboratory testing of the materials, numerical analysis of foundation stability, and a pilot field-scale engineering performance evaluation. However, quality control measures are still required so that only suitable materials are used for seawall and breakwater foundation construction. The development of different quality control measures for different site conditions is presented in this paper. The rationale, practicality, and implementation of these quality control measures are also discussed.     

Effects of meteorological conditions on PM10 concentrations - A study in Macau

Review on the annual PM₁₀ concentrations over a 10-year period shows that Macau is subjected to severe fine particulate pollution. Investigations of its variation in monthly and daily time scales with the local meteorological records reveal further details. It is found that a distinct feature of the Asian monsoon climates, the changes of wind direction, mainly controls the general trend of PM₁₀ concentration in a year. The monsoon driven winter north-easterly winds bring upon Macau dry and particle enriched air masses leading to a higher concentration in that period while the summer south-westerly winds transport humid and cleaner air to the region leading to a lower PM₁₀ value. This distinct seasonal feature is further enhanced by the lower rainfall volume and frequency as well as mixing height in winter and their higher counterparts in summer. It is also found that the development of tropical cyclones near Macau could also impose episode like PM₁₀ concentration spikes due to the pre-typhoon induced stagnant air motion followed by the swing of wind direction to the northerly.     

The trends of composite environmental indices in Korea

In this paper we construct for the first time an annual Composite Environmental Index from 1986 to 1995 in Korea, which is useful for evaluating the efficiency of environmental policies. Nine types of environmental problems are examined. On average, the composite index has increased annually by 5.3% over the 1986-1995 period, which implies that overall environmental quality has deteriorated gradually during this period. Problems such as the greenhouse effect, loss of biodiversity, natural resource depletion, and ecotoxication led to deterioration of environmental quality in the 1990s.     

Strontium/calcium ratio analysis of molluscan shells in Singapore waters using the X-ray fluorescence technique

The Sr/Ca ratios in molluscan shells in Singapore waters were measured using the X-ray fluorescence (XRF) technique. Our results show that the Sr/Ca ratio varies greatly among different species. However, within the same species, this ratio is practically the same for samples collected from sites close together but varies significantly for samples from sites far apart. Furthermore, this study shows that whole shell analysis using the XRF technique is simple and quick and that its application to environmental monitoring seems feasible.     

Decomposition of trifluoromethane in a dielectric barrier discharge non-thermal plasma reactor

The decomposition of trifluoromethane (CHF₃) was carried out using non-thermal plasma generated in a dielectric barrier discharge (DBD) reactor. The effects of reactor temperature, electric power, initial concentration and oxygen content were examined. The DBD reactor was able to completely destroy CHF₃ with alumina beads as a packing material. The decomposition efficiency increased with increasing electric power and reactor temperature. The destruction of CHF₃ gradually increased with the addition of O₂ up to 2%, but further increase in the oxygen content led to a decrease in the decomposition efficiency. The degradation pathways were explained with the identified by-products. The main by-products from CHF₃ were found to be COF₂, CF₄, CO₂ and CO although the COF₂ and CF₄ disappeared when the plasma were combined with alumina catalyst.     

Organo-modified sericite in the remediation of an aquatic environment contaminated with As(III) or As(V)

The aim of this investigation was to obtain the hybrid material precursor to the naturally and abundantly available sericite, a mica-based clay; the materials were further employed in the remediation of arsenic from aqueous solutions. The study was intended to provide a cost-effective and environmentally benign treatment technology. The hybrid organo-modified sericite was obtained using hexadecyltrimethylammonium bromide (HDTMA) and alkyldimethylbenzylammonium chloride (AMBA) organic surfactants by introducing regulated doses of HDTMA or AMBA. The materials were characterized using infrared and X-ray diffraction analytical data, whereas the surface morphology was discussed by taking its SEM images. These materials were employed to assess the pre-concentration and speciation of As(III) and As(V) from aqueous solutions. The batch reactor data showed that increasing the sorptive concentration (from 1.0 to 15.0 mg/L) and pH (i.e., pH 2.0 to 10.0) caused the percent uptake of As(III) and As(V) to decrease significantly. The kinetic data showed that a sharp initial uptake of arsenic reached its equilibrium state within about 50 min of contact time, and the sorption kinetics followed a pseudo-second-order rate law both for As(III) and As(V) sorption. A 1,000 times increase in the background electrolyte concentration, i.e., NaNO₃, caused a significant decrease in As(III) removal, whereas As(V) was almost unaffected, which inferred that As(III) was adsorbed, mainly by the van der Waals or even by the electrostatic attraction, whereas As(V) was adsorbed chemically and formed “inner-sphere” complexes at the solid/solution interface. The equilibrium state modeling studies indicated that the sorption data fitted well the Freundlich and Langmuir adsorption isotherms. Henceforth, the removal capacity was calculated under these equilibrium conditions. It was noted that organo-modified sericite possessed a significantly higher removal capacity compared to its virgin sericite. Between these two organo-modified sericite, the HDTMA-modified sericite possessed a higher removal capacity compared to the AMBA-modified sericite.     

Mechanisms of photosynthetic inactivation on growth suppression of Microcystis aeruginosa under UV-C stress

This study aims to investigate the effects of UV-C irradiation on photosynthetic processes of Microcystis aeruginosa to unravel the mechanism(s) involved in how and in what ways UV-C mediates growth suppression and cellular recovery. Changes in the concentration of photosynthetic pigments, photochemical efficiency, PS II core protein (D1) content, and the coding genes expressions were measured. The results indicate that UV-C doses at 20–200 mJ cm⁻² lead to rapid reduction in gene expression of both psbA (for D1) and cpc (for phycocyanin), but the suppression was short term and recoverable within 3 d of post-UV incubation. Conversely, UV-C doses at ?50 mJ cm⁻² could induce marked decline in photochemical efficiency (represented by the optimal PS II quantum yield, F_V/F_M, and the effective PS II quantum yield, Y) as well as decreases in D1 content and water soluble pigments (phycoerythrins, phycocyanins, allophycocyanins) in M. aeruginosa during the post UV-C incubation period. The results suggest that interruption of both the light energy harvesting apparatus (especially the water soluble pigments) and the photochemical process mainly accounted for the growth suppression effect in UV-C irradiated M. aeruginosa.     

Decoloration of textile dyes by alginate-immobilized Trametes versicolor

Alginate-immobilized Trametes versicolor decolorized Amaranth at similar rates in repeated batch culture when the dye was present in either (i) modified Kirk's medium containing 0.22 gl(-1) ammonium tartrate, (ii) the same buffer, thiamine, trace elements and glucose concentrations as in the modified Kirk's medium, or (iii) glucose alone at either 1, 5 or 10 gl(-1). With glucose alone (0.5 gl(-1)), Amaranth, Reactive Black 5, Reactive Blue 19 and Direct Black 22 had first-order decoloration rate constants of 0.56, 0.76, 0.52, and 0.15 h(-1), respectively. Mixtures of these dyes were also completely decolorized. After four successive decolorations, beads were kept in storage solutions for 48 d at 6 degrees C. CaCl2 (1g l(-1)) was the best storage solution as the beads were easier to handle and had the fastest decoloration rates after storage. Decoloration rates were faster with lower viscosity (less than 2000 cps) alginates and with softer beads which had a lower resistance to compression. Fungal colonization of the beads resulted in higher biomass concentrations with a corresponding higher decoloration rate but the beads became larger, had a lower resistance to compression and a higher percentage of bead breakage in a stirred tank reactor. Biomass, recovered from beads in which there was no growth, could be dispersed while the biomass from colonized beads formed a hollow, spherical shell due to growth on and near the bead surface and no growth in the bead interior. If alginate-immobilized T. versicolor is to be used in a stirred tank reactor, a high biomass loading during the immobilization phase and no fungal growth in the beads is recommended to have high decoloration rates and low bead breakage.     

Use of inert C&D materials for seawall foundation: A field-scale pilot test

The generation rate of construction and demolition (C&D) materials in Hong Kong has well exceeded the demand rate. An innovative solution has been developed by the Hong Kong Special Administrative Region Government to use the inert portion of C&D materials, denoted as public fill, for seawall foundation construction. A field-scale pilot test has been conducted to evaluate the constructability and engineering performance of the foundation so as to establish the viability of the solution. Details of the pilot test and results of the performance evaluation are presented in this paper. More importantly, the viability of an innovation solution to achieve effective allocation of sand fill resources, and conservation and recycling of inert C&D materials has been established.