Investigation of long-term river water quality variations using different urbanization indices and assessment of common scientific perspectives of urbanization on water quality

This study investigated the water quality variation spanning 30 years (1986–2017) in 16 catchments of Hong Kong against different urbanization indices, namely, built area fraction; population; and product of population and built area fraction. Pearson correlations of three different periods of time (1988–1990, 1998–2000, and 2015–2017) indicated that water quality trends were dependent on the urbanization index. Total solids, nitrite-nitrogen, total phosphorus, electrical conductivity, dissolved oxygen, and flow rate had significant deteriorative trends (Pearson r > 0.5 and p < 0.05) with population and product of built area and population. Results also interpreted that built area fraction and product of built area and population were the worst and best indices that represented urbanization and/or its impacts, respectively. Mann-Kendall test for the entire 30 year period showed that water quality had improved with time with respect to certain water quality parameters (e.g., dissolved oxygen, ammoniacal nitrogen and total suspended solids). The results portrayed that although the urbanization of catchments had increased with time, the river water quality with respect to many parameters showed signs of improvement and the legislative measures implemented seemed to be effective in controlling pollution.     

Exploring the risks and benefits of flexibility in biodiversity offset location in a case study of migratory shorebirds

Biodiversity offsets aim to counterbalance the residual impacts of development on species and ecosystems. Guidance documents explicitly recommend that biodiversity offset actions be located close to the location of impact because of higher potential for similar ecological conditions, but allowing greater spatial flexibility has been proposed. We examined the circumstances under which offsets distant from the impact location could be more likely to achieve no net loss or provide better ecological outcomes than offsets close to the impact area. We applied a graphical model for migratory shorebirds in the East Asian–Australasian Flyway as a case study to explore the problems that arise when incorporating spatial flexibility into offset planning. Spatially flexible offsets may alleviate impacts more effectively than local offsets; however, the risks involved can be substantial. For our case study, there were inadequate data to make robust conclusions about the effectiveness and equivalence of distant habitat-based offsets for migratory shorebirds. Decisions around offset placement should be driven by the potential to achieve equivalent ecological outcomes; however, when considering more distant offsets, there is a need to evaluate the likely increased risks alongside the potential benefits. Although spatially flexible offsets have the potential to provide more cost-effective biodiversity outcomes and more cobenefits, our case study showed the difficulty of demonstrating these benefits in practice and the potential risks that need to be considered to ensure effective offset placement.     

Recycling food and agriculture by-products to mitigate climate change: a review

Food loss and waste is a major issue affecting food security, environmental pollution, producer profitability, consumer prices, and climate change. About 1.3 billion tons of food products are yearly lost globally, with China producing approximately 20 million tons of soybean dregs annually. Here, we review food and agricultural byproducts with emphasis on the strategies to convert this waste into valuable materials. Byproducts can be used for animal and plant nutrition, biogas production, food, extraction of oils and bioactive substances, and production of vinegar, wine, edible coatings and organic fertilizers. For instance, bioactive compounds represent approximately 8–20% of apple pomace, 5–17% of orange peel, 10–25% of grape seeds, 3–15% of pomegranate peel, and 2–13% of date palm seeds. Similarly, the pharmaceutical industry uses approximately 6.5% of the total output of gelatin derived from fish bones and animal skin. Animals fed with pomegranate peel and olive pomace improved the concentration of deoxyribonucleic acid and protein, the litter size, the milk yield, and nest characteristics. Biogas production amounts to 57.1% using soybean residue, 53.7% using papaya peel, and 49.1% using sugarcane bagasse.

     

Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.

     

Changes in the Distribution of Broadleaf Tree Species in the Central Part of the Southern Urals since the 1970s

Russian Journal of Ecology - Changes in the distribution of broadleaf tree species—Tilia cordata Mill., Quercus robur L., Acer platanoides L., and Ulmus glabra Huds.—in the central part...     

Materials,fuels, upgrading,economy, and life cycle assessment of the pyrolysis of algal and lignocellulosic biomass: a review

Climate change issues are calling for advanced methods to produce materials and fuels in a carbon–neutral and circular way. For instance, biomass pyrolysis has been intensely investigated during the last years. Here we review the pyrolysis of algal and lignocellulosic biomass with focus on pyrolysis products and mechanisms, oil upgrading, combining pyrolysis and anaerobic digestion, economy, and life cycle assessment. Products include oil, gas, and biochar. Upgrading techniques comprise hot vapor filtration, solvent addition, emulsification, esterification and transesterification, hydrotreatment, steam reforming, and the use of supercritical fluids. We examined the economic viability in terms of profitability, internal rate of return, return on investment, carbon removal service, product pricing, and net present value. We also reviewed 20 recent studies of life cycle assessment. We found that the pyrolysis method highly influenced product yield, ranging from 9.07 to 40.59% for oil, from 10.1 to 41.25% for biochar, and from 11.93 to 28.16% for syngas. Feedstock type, pyrolytic temperature, heating rate, and reaction retention time were the main factors controlling the distribution of pyrolysis products. Pyrolysis mechanisms include bond breaking, cracking, polymerization and re-polymerization, and fragmentation. Biochar from residual forestry could sequester 2.74 tons of carbon dioxide equivalent per ton biochar when applied to the soil and has thus the potential to remove 0.2–2.75 gigatons of atmospheric carbon dioxide annually. The generation of biochar and bio-oil from the pyrolysis process is estimated to be economically feasible.

     

The deflectors influence on flow complexity,bed morphology,sediment transport and water quality of urban lotic waters - A laboratory study

In this laboratory study different combinations of bed (sand, pebble gravel [gravel], and a mix of sand and gravel) and flow (typical and overtopping) were experimented with to investigate the impact of porous deflectors in flow diversity, water quality, and fish performance in prismatic open channels. Deflectors changed the gradually varied flow to a rapidly varied flow, as a sudden change in the water depth was observed at the deflectors, and this change was large for smooth beds. With the presence of gravel, the scouring near the downstream deflector was almost twice that of the sand bed, and with the scouring at its own upstream deflector, irrespective of whether the flow was typical or overtopping. This behavior was a result of sand mobilization due to shear stress and sand mobilization aided gravel transport. The mixed bed showed less gravel movement compared to the gravel-only bed. The percentage of sediment washed out was minor for all bed scenarios, indicating that sediment transport was local. Relative to the sand bed without deflectors (representing a typical urban canal), deflectors resulted in reduced and improved water quality (in terms of sediment load) for sand, and mixed bed, respectively. The fishes found refuge and were comfortable in the pool areas created by deflectors unlike in channels without deflectors where they showed exhaustion.     

Spatial Distribution of Heavy Metals and <Superscript>137</Superscript>Cs in Spruce Forest Soil under Conditions of Regional Pollution

The influence of horizontal structure of spruce forest on the spatial distribution of acid-soluble Zn, Cd, Pb compounds and ¹³⁷Cs in the litter and the humus horizon of soddy podzolic soil has been studied in the territory with the regional background level of industrial fallout. It has been found that the distribution pattern of Zn in the forest litter is a result of biogeochemical processes. The litter in fern–wood sorrel microplots contains increased amounts of Zn and Cd, while the contents of Pb and ¹³⁷Cs are decreased. The distribution patterns of Pb and ¹³⁷Cs in the litter are positively correlated with each other, since both elements are deposited from the atmosphere, and similar mechanisms account for their redistribution in the spruce forest ecosystem.     

Singular Spectrum Analysis of Hydroecological Parameter Dynamics of Lake Naroch’ in the Years 1978–2015

Singular Spectrum Analysis (SSA) has been used to decompose continuous series of data on certain characteristics of Lake Naroch’ ecosystem during the vegetative seasons of years 1978–2015 into a long-time trend, a periodic component, and a residue not amenable to decomposition. The contribution of each component to changes in this variable has been assessed. The trends accounted for 78–97% of parameter variability, and the periodic components accounted for 2.5–15%. The fluctuations of phytoplankton and zooplankton biomass dynamics were the most diverse, and the contribution of these components was the greatest (15 and 8%, respectively). The periodic components in the changes of all parameters could be divided into four groups according to period duration (17–22, 7–15, 4–7, and less than 4 years). Multidimensional factor analysis of seven biotic parameters was performed in order to identify fluctuations in the ecosystem. Five major factors accounting for 93.6% of ecosystem changes together were identified, and each factor variable was subjected to SSA analysis. The period durations were similar for the oscillatory components identified. The first factor was interpreted as a trophic status of the water body, the second was taken to be the geographical location that defines the amount of solar radiation energy available, the third was taken to be the availability of biogenic elements (phosphorus in particular), and the fourth was interpreted as specific developmental cycles of live components of the ecosystem.     

Selection and integration of environmental impacts in the Danish transport infrastructure assessment process

Transport projects have numerous consequences for the environment, society and economy, and thus an EU Directive has stated a number of impacts that need to be assessed prior to any major intervention. This paper is set in a Danish context where the EU requirements have been adopted in the Environmental Impact Assessment (EIA) regulation along with national requirements. In recent years, however, the EIAs have been criticised for an inconsistent inclusion of impacts and unclear assessment process. A selection of EIAs is for this reason reviewed and compared to the EU Directive and corresponding works in Sweden and the UK to identify potential opportunities for improvements. From the literature study, an overview table with all potential relevant impacts for transport projects is set up to assist the EIA process. For the sake of simplicity and transparency, the impacts selected from this table should, however, be further reduced in number to ensure that only the most important impacts are included in the process. To further increase simplicity and transparency in the EIA process, a novel framework for assessing different types of impacts is proposed. In this framework, a comprehensive decision support tool involving stakeholders is in focus. The framework is supplemented with a procedure for generating objectives and presenting results in an appropriate way to the many stakeholders involved. The impacts overview table and the assessment techniques are applied to a case study to illustrate the process, and finally, conclusions and perspectives for future work within the field are set out.