Modeling the predictors of consumers’ online purchase intention of green products: the role of personal innovativeness and environmental drive

Environment, Development and Sustainability - Our society faces mounting pressure regarding the necessity of green consumption as issues related to the environment will likely become a severe...     

Fuelwood assessment at the micro-watershed level:a case study in Garhwal Himalaya,India

Biomass,as fuelwood,is one of the major sources of energy in rural areas,especially in the mountainous regions of the world.As the increasing human population exerts more pressure on the forest thereby inducing an adverse effect on the sustainability of the ecosystem,which consequently causes fuelwood crisis at a local level,this crisis is spatio-temporal in nature.Thus,the major objective of this study is to assess the sustainability of fuelwood at different probable scenarios at a micro watershed level.The present study was conducted in the Phakot watershed,the Tehri Garhwal district of central Himalaya in India,during 2006-2008.Based on the vegetation composition in the study area,the net primary productivity(NPP)value of the Oak forest,and mixed oak and sal forests,was used for the quantification of fuelwood availability in evergreen and deciduous forests,respectively.The fuelwood demand was calculated on the basis of seasonal fuelwood consumption values.Nine probable permutations for availability-demand scenarios assuming the existence of high(H),low(L)and average(A)conditions were analyzed for evaluating the stress.The available annual harvestable fuelwood in the watershed is in the minimum and maximum ranges of 2283.28 to 4066.00 tons,respectively,per year whereas it has a demand of 110.76 tons as the minimum to 3659 tons as the maximum annually.This shows that in the current availabilitydemand scenario,the watershed does not have fuelwood crisis in the present situation but needs to maintain the sustainability of the system.Based on our study,it is concluded that,globally,more spatio-temporal study is required to understand the issues at the local level.     

On shrimp,salt and security: livelihood risks and responses in South Bangladesh and East India

Bangladesh and India are among the world’s most populous but also most vulnerable countries to environmental risks. In addition to storms, sea-level rise, floods and droughts, local communities face a multitude of pre-existing and concomitant economic and socio-political risks. To understand these risks and how communities respond to them is critical in securing community livelihoods. We therefore ask what are the livelihood risks; how do they impact the human security of environment sensitive communities in Satkhira, Bangladesh and in Odisha, India; and, what are the responses of these communities to the livelihood risks? The communities studied in Bangladesh depend mainly on the shrimp and fish resources of the Sundarbans mangrove forest. The two communities researched at Lake Chilika in India depend on fishing and salt farming, respectively. The field research, conducted in 2012 and 2013, shows that the communities face multiple and interacting livelihood risks. While storms and floods are common environmental risks in both countries, related livelihood risks are case-specific. In Bangladesh, attacks by criminals are the major threat to human well-being, while in India, it is violent conflict between lake users. Unsustainable resource extraction is found in both study countries. In Bangladesh, shrimp farming weakens the flood protection, while in India, illegal prawn farming marginalizes poorer lake users. Accessing loans and labor migration are responses observed in both countries. We conclude that adaptation to environmental changes needs to be sensitive to the interaction between governance, local institutions and socio-economic developments.     

Highly efficient biosorptive removal of lead from industrial effluent

This study has been focused on the efficient removal of Pb (II) from contaminated waters by biosorption using plant derived material. Accordingly an indigenous shrub, Tinospora cordifolia has been identified as the most suitable biosorbent. The plant biomass was subjected to optimization of various parameters such as the pH, equilibrium time, dosage, concentration, temperature and the applicable adsorption models. The optimum pH identified was 4.0 with a contact time of 60 min at room temperature (27 ± 2 °C). The experimental data fitted well to adsorption isotherms and the uptake capacity of Pb (II) was found to be 20.83 and 63.77 mg/g in batch mode and column mode, respectively. The high correlation factors obtained for Langmuir and Freundlich models indicated that both models were obeyed by the system. Kinetic study for adsorption of Pb (II) follow only pseudo second order rate of reaction. The accumulation of lead in biomass was confirmed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. The FTIR analysis indicated the involvement of hydroxyl (−OH), alkenes (=CH) and carbonyl group (C = O) chelates in metal binding. The SEM and EDX analysis showed the structural changes and the filling of voids in the biomass thus, it indicated the metal-binding mechanism. In elution studies, the 0.1 M Na₂CO₃ was found to be the best with about 71% elution of the adsorbed metal. The biomass was then used for the removal of Pb (II) in synthetic and real wastewater samples from a lead-acid battery industry. It is also noteworthy that even at a very high concentration of 450 mg/L, the biomass was showing about 92% removal. The result is to establish the efficacy of T. cordifolia as a very good bioadsorbent for the Pb (II) removal from contaminated water.

     

Livelihood vulnerability approach to assessing climate change impacts on mixed agro-livestock smallholders around the Gandaki River Basin in Nepal

Climate change vulnerability depends upon various factors and differs between places, sectors and communities. People in developing countries whose subsistence livelihood depends mainly upon agriculture and livestock production are identified as particularly vulnerable. Nepal, where the majority of people are in a mixed agro-livestock system, is identified as the world’s fourth most vulnerable country to climate change. However, there is limited knowledge on how vulnerable mixed agro-livestock smallholders are and how their vulnerability differs across different ecological regions in Nepal. This study aims to test two vulnerability assessment indices, livelihood vulnerability index and IPCC vulnerability index, around the Gandaki River Basin of central Nepal. A total of 543 households practicing mixed agro-livestock were surveyed from three districts, namely Dhading, Syangja and Kapilvastu representing three major ecological zones: mountain, mid-hill and Terai (lowland). Data on socio-demographics, livelihood determinants, social networks, health, food and water security, natural disasters and climate variability were collected and combined into the indices. Both indices differed for mixed agro-livestock smallholders across the three districts, with Dhading scoring as the most vulnerable and Syangja the least. Substantial variation across the districts was observed in components, sub-components and three dimensions (exposure, sensitivity and adaptive capacity) of vulnerability. The findings help in designing site-specific intervention strategies to reduce vulnerability of mixed agro-livestock smallholders to climate change.     

Effect of dust load on the leaf attributes of the tree species growing along the roadside

Dust is considered as one of the most widespread air pollutants. The objective of the study was to analyse the effect of dust load (DL) on the leaf attributes of the four tree species planted along the roadside at a low pollution Banaras Hindu University (BHU) campus and a highly polluted industrial area (Chunar, Mirzapur) of India. The studied leaf attributes were: leaf area, specific leaf area (SLA), relative water content (RWC), leaf nitrogen content (LNC), leaf phosphorus content (LPC), chlorophyll content (Chl), maximum stomatal conductance (Gs_max), maximum photosynthetic rate (A _max) and intrinsic water-use efficiency (WUEi). Results showed significant effect of sites and species for DL and the leaf attributes. Average DL across the four tree species was greater at Chunar, whereas, the average values of leaf attributes were greater at the BHU campus. Maximum DL was observed for Tectona grandis at Chunar site and minimum for Syzygium cumini at BHU campus. Across the two sites, maximum value of SLA, Chl and Gs_max were exhibited by S. cumini, whereas, the greatest value of RWC, LNC, LPC, A _max and WUEi were observed in Anthocephalus cadamba. A. cadamba and S. cumini exhibited 28 and 27 times more dust accumulation, respectively, at the most polluted Chunar site as compared to the BHU campus. They also exhibited less reduction in A _max due to dust deposition as compared to the other two species. Therefore, both these species may be promoted for plantation along the roadside of the sites having greater dust deposition.     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.     

Modeling and optimization of trihalomethanes formation potential of surface water (a drinking water source) using Box–Behnken design

Purpose  

The present research aims to investigate the individual and interactive effects of chlorine dose/dissolved organic carbon ratio, pH, temperature, bromide concentration, and reaction time on trihalomethanes (THMs) formation in surface water (a drinking water source) during disinfection by chlorination in a prototype laboratory-scale simulation and to develop a model for the prediction and optimization of THMs levels in chlorinated water for their effective control.