A rapid green synthesis of Ag/AgCl-NC photocatalyst for environmental applications

Environmental Science and Pollution Research - The present study focuses on extract-mediated Ag nanoparticles (NPs), AgCl-NPs, and Ag/AgCl nanocomposites (NCs) as photocatalysts along with its...     

Matrix Diffusion Modeling Applied to Long‐Term Pump‐and‐Treat Data: 2. Results From Three Sites

The data mining/groundwater modeling methodology developed in McDade et al. (2013) was performed to determine if matrix diffusion is a plausible explanation for the lower‐concentration but persistent chlorinated solvent plumes in the groundwater‐bearing units at three different pump‐and‐treat systems. Capture‐zone maps were evaluated, and eight wells were identified that did not draw water from any of the historical source areas but captured water from the sides of the plume. Two groundwater models were applied to study the persistence of the plumes in the absence of contributions from the historical source zones. In the wells modeled, the observed mass discharge generally decreased by about one order of magnitude or less over 4 to 10 years of pumping, and 1.8 to 17 pore volumes were extracted. In five of the eight wells, the matrix diffusion model fit the data much better than the advection dispersion retardation model, indicating that matrix diffusion better explains the persistent plume. In the three other wells, confounding factors, such as a changing capture zone over time (caused by changes in pumping rates in adjacent extraction wells); potential interference from a high‐concentration unremediated source zone; and limited number of pore volumes removed made it difficult to confirm that matrix diffusion processes were active in these areas. Overall, the results from the five wells indicate that mass discharge rates from the pumping wells will continue to show a characteristic “long tail'' of mass removal from zones affected by active matrix diffusion processes. Future site management activities should include matrix diffusion processes in the conceptual site models for these three sites. © 2013 Wiley Periodicals, Inc.     

World demand for cobalt: An econometric study

This article analyses the world demand for cobalt. It estimates short- and long-run elasticities with respect to price, activity and in some cases with respect to substitute-complement variables. For the USA these estimates have been obtained for all the important end-use categories. Aggregate elasticities are estimated for Japan, West Germany, France and for the non-communist world (excluding the USA). The appendix to the paper models price setting in the cobalt market and presents two simple simulations conducted on the world cobalt market.     

Uranium quantification in groundwater and health risk from its ingestion in Haryana,India

Uranium is a naturally occurring radioactive element which may cause toxicological or radiological hazards to the public if present in drinking water. This study reports the quantification of uranium in groundwater of major towns of the district Fatehabad, Haryana, India. Uranium concentrations ranged between 0.3 and 48 μg L^?1. In 22% of the groundwater samples, uranium concentrations were higher than the World Health Organization maximum permissible limit of 30 µg L^?1. The radiological dose for males was found to be in the range of 4.8?×?10^?4–7.1?×?10^?2 mSv y^?1 and for females 3.5?×?10^?4–5.2?×?10^?2 mSv y^?1. The results showed that due to the ingestion of groundwater in the study area, radiological cancer risk is in the range of 9.1?×?10^?7–1.3?×?10^?4, lower than the risk limit. Uranium ingestion from groundwater varied from 0.02 to 3.5 µg kg^?1 day^?1, which is within acceptable limit.     

Ecotoxicological effects of microplastics on biota: a review

The ubiquitous presence of microplastics in the environment has drawn the attention of ecotoxicologists on its safety and toxicity. Sources of microplastics in the environment include disintegration of larger plastic items (secondary microplastics), personal care products like liquid soap, exfoliating scrubbers, and cleaning supplies etc. Indiscriminate usage of plastics and its poor waste disposal management pose serious concern on ecosystem quality at global level. The present review focused on the ecological impact of microplastics on biota at different trophic levels, its uptake, accumulation, and excretion etc., and its plausible mechanistic toxicity with risk assessment approaches. Existing scientific evidence shows that microplastics exposure triggers a wide variety of toxic insult from feeding disruption to reproductive performance, physical ingestion, disturbances in energy metabolism, changes in liver physiology, synergistic and/ or antagonistic action of other hydrophobic organic contaminants etc. from lower to higher trophics. Thus, microplastic accumulation and its associated adverse effects make it mandatory to go in for risk assessment and legislative action. Subsequent research priorities, agenda, and key issues to be addressed are also acknowledged in the present review.     

Catalytic co-pyrolysis of <Emphasis Type="Italic">Pterospermum acerifolium</Emphasis> and plastic waste

The continuous increase in generation of solid wastes and gradual declining of fossil fuels necessities the development of sustainable conversion technologies. Recent studies have shown that the addition of biomass with hydrogen-rich co-reactants (plastics) altogether enhances the quality of bio-fuels using pyrolysis process. It was observed that red mud (which is produced as by-product in Bayer process) was used as a catalyst in few conversion process. In this study, pyrolysis of biomass (Pterospermum acerifolium) and waste plastic mixture with activated red-mud catalyst was investigated using thermo-gravimetric analysis. The kinetic parameters (activation energy and pre-exponential factor) of this process were determined using distributed activation energy model (DAEM). The DAEM was effectively applied to decide the activation energy (E) and pre-exponential factor (A) for each sample at various conversions during the catalytic co-pyrolysis. The biomass, plastic, biomass–plastic, and biomass–plastic–catalyst exhibited activation energies in the ranges of 78–268, 172–218, 67–307, and 202–292 kJ/mol, respectively.     

Appraisal of salinity and fluoride in a semi-arid region of India using statistical and multivariate techniques

Various physico-chemical parameters, including fluoride (F⁻), were analyzed to understand the hydro-geochemistry of an aquifer in a semi-arid region of India. Furthermore, the quality of the shallow and deep aquifer (using tube well and hand pumps) was also investigated for their best ecological use including drinking, domestic, agricultural and other activities. Different multivariate techniques were applied to understand the groundwater chemistry of the aquifer. Findings of the correlation matrix were strengthened by the factor analysis, and this shows that salinity is mainly caused by magnesium salts as compared to calcium salts in the aquifer. The problem of salinization seems mainly compounded by the contamination of the shallow aquifers by the recharging water. High factor loading of total alkalinity and bicarbonates indicates that total alkalinity was mainly due to carbonates and bicarbonates of sodium. The concentration of F⁻ was found more in the deep aquifer than the shallow aquifer. Further, only a few groundwater samples lie below the permissible limit of F⁻, and this indicates a risk of dental caries in the populace of the study area. The present study indicates that regular monitoring of groundwater is an important step to avoid human health risks and to assess its quality for various ecological purposes.     

Mapping of fluoride endemic area and assessment of F−1 accumulation in soil and vegetation

The prevalence of fluorosis is mainly due to the consumption of more fluoride (F^?1) through drinking water, vegetables, and crops. The objective of the study was mapping of F^?1 endemic area of Newai Tehsil, Tonk district, Rajasthan, India. For the present study, water, soil (0–45 cm), and vegetation samples were collected from 17 villages. Fluoride concentration in water samples ranged from 0.3 to 9.8 mg/l. Out of 17 villages studied, the amounts of F^?1 content of eight villages were found to exceed the permissible limits. Labile F^?1 content and total F^?1 content in soil samples ranges 11.00–70.05 mg/l and 50.3–179.63 μg g^?1, respectively. F^?1 content in tree species was found in this order Azadirachta indica 47.32–55.76 μg g^?1 > Prosopis juliflora 40.16–49.63 μg g^?1 > Acacia tortilis 34.39–43.60 μg g^?1. While in case of leafy vegetables, F^?1 content order was Chenopodium album 54.23–98.42 μg g^?1 > Spinacea oleracea 30.41–64.09 μg g^?1 > Mentha arvensis 35.48–51.97 μg g^?1. The order of F^?1 content in crops was found as 41.04 μg g^?1 Pennisetum glaucum > 13.61 μg g^?1 Brassica juncea > 7.98 μg g^?1 Triticum sativum in Krishi Vigyan Kendra (KVK) farms. Among vegetation, the leafy vegetables have more F^?1 content. From the results, it is suggested that the people of KVK farms should avoid the use of highly F^?1 containing water for irrigation and drinking purpose. It has been recommended to the government authority to take serious steps to supply drinking water with low F^?1 concentration for the fluorosis affected villages. Further, grow more F^?1 hyperaccumulator plants in F^?1 endemic areas to lower the F^?1 content of the soils.     

Impact of vehicular exhaust on ambient air quality of Rohtak city, India

In the present study, ambient air quality of Rohtak city (Haryana) was monitored by High Volume Sampler. The selected parameters to judge the quality of air were Sulphur dioxide (SO2), Nitrogen dioxide NO), Ozone (O3) and Suspended particulate matters (SPM) which give a fair idea of pollution load carried by the air. The monitoring data were collected from six sites randomly selected in Rohtak city. Sulphur dioxide was found below the permissible limits of National Ambient Avo Quality Standards (NAAQS) at all the sites. Higher concentration of SO2 was observed during winter in comparison to summer and monsoon seasons. Nitrogen dioxide concentration was found to be above the prescribed standards of NAAOS at four sites in winter season. Ozone concentration was found below the prescribed standards (NAAOS), but its concentration was higher in summer season as compared to winter. Suspended particulate matter concentration was observed above the safety limits at all the sites in all three seasons.