Thermoplastic elastomers from waste polyethylene and reclaim rubber blends and their composites with fly ash

Waste polyethylene (WPE) collected from the municipality solid waste (MSW) was melt blended with reclaim rubber (RR) in different proportions and composites with fly ash (FA) were prepared and characterized. Mechanical and dynamic mechanical properties of the blends and composites were studied in presence as well as in absence of a silane-coupling agent (Si-69). Tensile strength, flexural strength, flexural modulus, impact strength and hardness properties of the FA composites was found to improve in presence of Si-69. Phase morphology of the blends has been reported.     

Risk-based prediction of metal toxicity in sediment and impact on human health due to consumption of seafood (Saccostrea cucullata) found in two highly industrialised coastal estuarine regions of Eastern India: a food safety issue

Estuarine ecosystems of the Bay of Bengal, India, are considered as the most productive environment, which have been persistently threatened by substantial anthropogenic activity. This study aims to investigate the metal contamination in the sediment of two estuaries and possible biomagnifications in the indigenous edible oyster Saccostrea cucullata and related health hazards due to its consumption. The accumulative ecological risks indicated that the sediment is moderate to strongly contaminated with cadmium and lead. The sediment pollution index and pollution load index suggested that the sediment possesses a little ecological stress on the exposed flora and fauna. The statistical interpretation highlights the most metals which have a similar source of origin and are bound to the finer fractions of the sediment, except nickel. Bioaccumulation of sediment-associated Cu and Zn in oyster reflects their potential biomagnifications through aquatic food chain. HPI range was below the critical limit of safe human consumption. The non-carcinogenic (THQ) and carcinogenic (CR) health hazards were estimated from the PTDI provided by USEPA. Except Cr, Hg and Zn, the THQ of all other metals was > 1 suggesting detrimental non-carcinogenic health effects on humans. The TCR of Cr and Cd above safety limit indicates the exposed population might be under severe carcinogenic threat due to those metals.

     

The Synthesis and FTIR, Kinetics and TG/DTG/DTA Study of Inter Penetrating Polymer Networks (IPNs) Derived from Polyurethanes of Glycerol Modified Castor Oil and Cardanol Based Dyes

Interpenetrating polymer networks from agricultural products such as glycerol modified castor oil polyurethanes and cardanol based dyes have not been extensively studied so far. Such polymers were synthesized using benzoyl peroxide as initiator and ethylene glycol dimethacrylate as cross-linker. Characterizations of these polymers were performed by Fourier Transform infra red spectra and thermal analysis techniques such as thermogravimetric analysis, derivative thermogravimetry and differential thermal analysis. The kinetic parameters such as activation energies and orders of reaction were estimated by using Freeman?CAnderson??s method. The effects of changes in polyurethane to dye monomer weight ratio and NCO/OH molar ratio of polyurethanes on the properties of such polymers were studied.     

Book reviews

ANALYTICAL PLANNING: THE ORGANISATION OF SYSTEMS

Thomas L. Saaty and Kevin P. Kearns

Pergamon Press, 1985. Price: U.S. $40.00, U.K. £29.50.

THE GEOGRAPHER AT WORK

Peter Gould

Routledge and Kegan Paul, London 1985’ Price: £8.95.

UTOPIA ON TRIAL

Alice Colman

Hilary Shipman Ltd., 19 Framfield Road, Highbury, London. May 1985 (reprinted August, 1985). Price: £7.95.

SIR RAYMOND UNWIN: ARCHITECT, PLANNER AND VISIONARY

Frank Jackson

A. Zwemmer Ltd., London 1985. 187 pp. with maps and illustrations.

STRATEGIC PLANNING IN ACTION: THE IMPACT OF THE CLYDE VALLEY REGIONAL PLAN 1946–1982

R. Smith and U. Wannop (eds)

Gower, 1985, 272 pp. Price: £16.50.

LOCALITIES, CLASS AND GENDER

The Lancaster Regionalism Group (Linda Murgatroyd, Mike Savage, Dan Shapiro, John Urry, Sylvia Walby, Alan Warde, with Jane Mark‐Lawson)

Pion Ltd., 1985. Price: £12.00.     

Source identification,environmental risk assessment and human health risks associated with toxic elements present in a coastal industrial environment,India

This study investigated the source and contamination levels of toxic elements (Cd, Cr, As, Pb, Ni and Hg) present in a coastal environment, Paradip—an industrial hub of the east coast of India. The ecological risk assessment indices and human exposure models were used to evaluate the pollution status. Enrichment factor indicated that all the metal(loid)s found in the sediment are mostly derived from the anthropogenic source. According to the sediment quality quotient, 8.33% of sediments have crossed the ERM limit for Ni that can be fatal to biota. Meanwhile, 66.66, 41.66 and 8.33% of sediments have exceeded PEL range for Cr, Ni and As, respectively, that can register frequent lethal toxicity to benthic biota. As had the highest potential ecological harm coefficient (Er_f?>?80), and Hg had moderate ecological harm coefficient (40?<?Er_f?<?80). Summarily, the sediment quality of this site is moderate to heavily toxic to benthic organisms. The concentration of toxic metals in seawater was below the permissible limit (CCC and CMC) set by USEPA indicating that water is relatively safer for free floating aquatic biota. The health risk index of toxic metal (loid)s present in soils of the residential sites has confirmed that there is a severe non-carcinogenic threat for children (HI child?>?1) and a borderline carcinogenic risk for both adult and children. THQ_Cr possesses highest non-carcinogenic threat, which contributed approximately 50% to HI followed by THQ_As. The contribution of carcinogenic risk of chromium (CR_Cr) to TCR is approximately 60%. Cr is the significant contaminant of this site that has highest health effects. Highest exposure risks were associated with ingestion pathway accounting for about 85% of the total for most of the elements.     

Assessing Spatial Occurrence of Ground Level Ozone around Coal Mining Areas of Chandrapur District, Maharashtra, India

Stratospheric input and photochemical ozone formation in the troposphere are the two main sources determining the ozone levels in the surface layer of the atmosphere. Because of the importance of ozone in controlling the atmospheric chemistry and its decisive role in the heat balance of atmosphere, leading to climate change, the examination of its formation and destruction are of great interest. This study characterized the distribution of Ground level Ozone (GLO) in Chandrapur district is lying between 19°25′N to 20°45′N and 78°50′E to 80°10′E. Continuous ozone analyzer was used to quantify GLO at thirteen locations fixed by Global Positioning System (GPS) during the winter of 2005–2006. The daily GLO at all the locations ranged between 6.4 and 24.8 ppbv with an average and standard deviation of 14.9 ± 6.5 ppbv. The maximum and minimum concentration occurs during 1300–1600 h and 0300–0500 h may be due to high solar radiation facilitating photochemical production of O₃ and downward mixing from the overlying air mass and in situ destruction of ozone by deposition and/or the reaction between O₃ and NO. GIS based spatial distribution of GLO in Chandrapur district is indicates that the central core of the district and southern sites experienced elevated levels of GLO relative to the northern and western areas. The sites near by Chandrapur city are particularly affected by elevated GLO. The average variation of GLO with temperature shows a significant correlation of r = 0.55 indicating a direct relationship between GLO and temperature. Similarly an attempt has been made to compare the GLO monitored data in Chandrapur district with the reported values for other locations in Indian cities. This generated database helps regulatory agencies to identify locations where the natural resources and human health could be at risk.     

Atmospheric Emissions from Oxidation Ponds

The electrodes in industrial precipitators collect many tons of dust daily, and the efficient transfer of this dust burden to the hoppers is a challenging problem in mechanical engineering. Many varieties of devices have been tried; hammers, vibrators, scrapers, water flushing, gas blasting, etc. Impact devices for this purpose are usually called “rappers.” Laboratory experiments described in this paper show that normal (perpendicular) rapping is more effective than shear rapping; that thick dust layers are more easily removed by rapping than thin ones; that rapping becomes easier with increasing temperature, within limits; and that the electrostatic forces acting upon the precipitated dust layer play an important role. Quantitative data are shown graphically. The relation of these results to previous studies by other investigators is discussed.