Emerging applications of green coconut: A promising lignocellulosic biomass

Waste accumulation is a grave concern and becoming a transboundary challenge for environment. During Covid-19 pandemic, diverse type of waste were collected due to different practices employed in order to fight back the transmission rate of the virus. Covid-19 was proved to be capricious catastrophe of this 20th century and even not completely eradicated from the world. The havoc created by this imperceptible quick witted, pleomorphic deadly virus can't be ignored. Though a number of vaccines have been developed by the scientists but there is a fear of getting this virus again in our life. Medical studies prove that immunity drinks will help to reduce its reoccurrences. Coconut water is widely used among all drinks available globally. Its massive consumption created an incalculable pile of green coconut shells around the different corners of the world. This practice generating enormous problem of space acquisition for the environment. Both the environment and public health will benefit from an evaluation of quantity of coconut waste that is being thrown and its potential to generate value added products. With this context, present article has been planned to study different aspects like, coconut waste generation, its biological properties and environmental hazards associated with its accumulation. Additionally, this review illustrates, green technologies for production of different value added products from coconut waste.     

Five-wheel framework for system-based monitoring of heavy metal pollution in rivers

Sectorial approach for monitoring heavy metal pollution in rivers has failed to report realistic pollution status and associated ecological and human health risks. The increasing spread of heavy metals from different sources and emerging risks to human and environmental health call for reexamining heavy metal pollution monitoring frameworks. Also, the sources, spread, and load of heavy metals in the environment have changed significantly over time, requiring consequent modification in the monitoring frameworks. Therefore, studies on heavy metal monitoring in rivers conducted in the last decade were evaluated for experimental designs, research frameworks, and data presentations. Most studies (∼99%) (i) lacked inclusiveness of all environmental compartments; (ii) focused on “one pollutant – one/two compartment” or sometimes “one pollutant – one compartment – one effect” approach; and (iii) remained “data-rich but information poor.” An ecological approach with integrative system thinking is proposed to develop a holistic approach for monitoring river pollution. It is visualized that heavy metal monitoring, risk analyses, and water management must incorporate tracking pollutants in different environmental compartments of a river (water, sediment, and floodplain/bank soil) and consider correlating it with riverbank land use. The systems-based pollution monitoring and assessment studies will reveal the critical factors that drive heavy metals pollutant movement in ecosystems and associated potential risks to the environment, wildlife, and humans. Also, water quality and pollution indexing tools would help better communicate complex pollution data and associated risks among all stakeholders. Therefore, integrating systems approaches in scientific- and policy-based tools would help sustainably manage the health of rivers, wildlife, and humans.     

Synthesis,Characterization and Environmental Applications of a New Bio-Composite Gelatin-Zr(IV) Phosphate

Gelatin-Zr(IV) phosphate composite (GT/ZPC) was synthesized by sol–gel method. Different techniques viz. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray powdered diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for the characterisation of GT/ZPC composite ion exchanger. The ion exchange capacity (IEC) of GT/ZPC was observed to be better (1.04 meq g^?1) than its inorganic counterpart (0.64 meq g^?1). The pH studies revealed the monofunctional nature of GT/ZPC with one inflection point. The distribution studies showed that the GT/ZPC was highly selective for Cd²⁺ as compare to other metal ions. The environmental applicability of ion exchanger has been analysed for binary separations of metal ions using column method. Cd²⁺ was effectively removed from synthetic mixture of metal ions (Zn²⁺, Pb²⁺, Ni²⁺, Co²⁺ and Cu²⁺).     

Prevalence of multidrug-resistant,coagulase-positive Staphylococcus aureus in nasal carriage,food, wastewater and paper currency in Jalandhar city (north-western), an Indian state of Punjab

Eighteen sites impacted by abandoned mine drainage (AMD) in Pennsylvania were sampled and measured for pH, acidity, alkalinity, metal ions, and sulfate. This study compared the accuracy of four acidity calculation methods with measured hot peroxide acidity and identified the most accurate calculation method for each site as a function of pH and sulfate concentration. Method E1 was the sum of proton and acidity based on total metal concentrations; method E2 added alkalinity; method E3 also accounted for aluminum speciation and temperature effects; and method E4 accounted for sulfate speciation. To evaluate errors between measured and predicted acidity, the Nash-Sutcliffe efficiency (NSE), the coefficient of determination (R ²), and the root mean square error to standard deviation ratio (RSR) methods were applied. The error evaluation results show that E1, E2, E3, and E4 sites were most accurate at 0, 9, 4, and 5 of the sites, respectively. Sites where E2 was most accurate had pH greater than 4.0 and less than 400 mg/L of sulfate. Sites where E3 was most accurate had pH greater than 4.0 and sulfate greater than 400 mg/L with two exceptions. Sites where E4 was most accurate had pH less than 4.0 and more than 400 mg/L sulfate with one exception. The results indicate that acidity in AMD-affected streams can be accurately predicted by using pH, alkalinity, sulfate, Fe(II), Mn(II), and Al(III) concentrations in one or more of the identified equations, and that the appropriate equation for prediction can be selected based on pH and sulfate concentration.     

Efficient microwave degradation of humic acids in water using persulfate and activated carbon

Environmental Chemistry Letters - Humic acids are complex mixtures of organic molecules of different sizes, molecular weights and functional groups such as phenols, carboxyls, quinones and amino...     

Aerogels and metal–organic frameworks for environmental remediation and energy production

Environmental pollution and climate change are requiring new methods to clean pollutants and produce sustainable energy. Aerogels and metal organic frameworks are emerging as advanced porous materials with higher functionality, high surface area, high porosity and flexible chemistry. Aerogels are dried gels prepared using the sol–gel procedure, whereas metal organic frameworks are networks of organic ligands and metal ions connected by coordination bonds. Applications of aerogels include the removal of heavy metals, CO₂ capture and reduction, photodegradation of pollutants, air cleanup and water splitting. This article reviews the synthesis and types of aerogels and metal organic frameworks, and the application to pollutant removal, energy production including hydrogen, methane reforming, CO₂ conversion and NOx removal.     

Nanoplastics are potentially more dangerous than microplastics

Environmental Chemistry Letters - Nanoplastics are probably much more dangerous for living organisms than microplastics because they are more abundant and reactive. They can potentially...     

Remediation of noxious pollutants using nano-titania-based photocatalytic construction materials: a review

Environmental Science and Pollution Research - Nano-titania (n-TiO2), due to its unique photocatalytic and hydrophobic properties, can be used to prepare self-cleaning cement-based smart building...     

The Water Poverty Index: An application in the Indian context

For developing countries, the proportion of households covered by improved water resources is conventionally used to assess the water stress situation. However, in a developing country like India with a high population growth rate, water demand and supply are considerably mismatched. An agro-based economy with large variations in socio-economic conditions and changing rainfall patterns across the states imposes greater challenge on water resources. Therefore, there is a need to assess the water situation across the country in a holistic manner. This paper proposes application of the Water Poverty Index as a comprehensive policy tool to assess actual water-stress situation across 20 major states in India. This index covers important socio-economic parameters such as access, capacity, use and environment in addition to water resources of each state. The results and findings are expected to be of use to policymakers and implementing agencies. In view of policy formulation, a state performing well on a Water Poverty Index component can act as a benchmark for another state.     

Chemistry of atmospheric dust and critical load assessment in Delhi region (India)

This is the first study in the Delhi region that assesses the critical load capacity of soil systems with respect to the atmospheric deposition and air quality, from July to October in 2012. Trend analysis of NO₂ and SO₂ in Delhi, using the Central Pollution Control Board (CPCB) data, showed interesting patterns matching with the trends in vehicular load in the city. This was followed by the calculation of the critical load of atmospheric acidity for sulphur and nitrogen in order to check the vulnerability of the soil systems in Delhi. Here, the steady state mass balance approach was majorly applied and the study conducted in the Agra region was taken as reference. The calculated values of critical loads of sulphur (225–275?eq/ha/yr) and nitrogen (298–303?eq/ha/yr), for the soil system in Delhi, were calculated with respect to three plant species, namely Anjan grass, Hibiscus and Black siris. The present loads of sulphur (PL(S)?=?26.40?eq/ha/yr) and nitrogen (PL(N)?=?36.51?eq/ha/yr) were found to be much lower than their respective critical loads. From the results, it can be concluded that the present loads of atmospheric acidic deposition in Delhi region do not pose any danger of acidification of soil system because it is countered by buffering capacity of soil generated dust. However, considering the pace at which the city is growing, it is likely that in coming decades, the present load will increase and thus the values evaluated in this study are likely to serve as an important reference for future assessment of the pollution scenario in the city.