Food Industry Co-streams: Potential Raw Materials for Biodegradable Mulch Film Applications

Vast amounts of co-streams are generated from plant and animal-based food processing industries. Efficient utilization of these co-streams is important from an economic and environmental perspective. Non-utilization or under-utilization of co-streams results in loss of potential revenues, increased disposal cost of these products and environmental pollution. At present, extensive research is taking place around the globe towards recycling of co-streams to generate value-added products. This review evaluates various co-streams from food processing industries as raw materials in developing biodegradable agricultural mulching applications. Among the agriculture-based co-streams, potato peels, tomato peels, carrot residues, apple pomace, coffee residues and peanut residues were reviewed with respect to production amount, composition, film forming components and film forming capabilities. Similarly, selected co-streams from slaughterhouses, poultry and fish processing industries were also reviewed and evaluated for the same purpose.     

Multiple comparisons of organic,microbial, and fine particulate pollutants in typical indoor environments: Diurnal and seasonal variations

This study was performed to investigate the possible sources as well as seasonal and diurnal variations of indoor air pollutants in widely used four different environments (house, office, kindergarten, and primary school) in which people spend most of their time. Bioaerosol levels and species, volatile organic compound (VOC) levels, and PM_2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm) levels were determined in different parts of these environments in parallel with outdoor sampling. Air pollution samplings were carried out in each microenvironment during five subsequent days in both winter and summer in Ankara, Turkey. The results indicated that bioaerosol, VOC, and PM_2.5 levels were higher in the winter than in the summer. Moreover, PM_2.5 and bioaerosol levels showed remarkable daily and diurnal variations, whereas a good correlation was found between the VOC levels measured in the morning and in the afternoon. Bacteria levels were, in general, higher than fungi levels. Among the VOCs, toluene was the most predominant, whereas elevated n-hexane levels were also observed in the kindergarten and the primary school, probably due to the frequent wet cleaning during school days. According to factor analysis, several factors were found to be significantly influencing the indoor air quality (IAQ), and amongst them, VOC-based products used indoors ranked first. The overall results indicate that grab sampling in naturally ventilated places may overestimate or underestimate the IAQ due to the inhomogeneous composition of indoor air caused by irregular exchanges with the outdoor air according to the season and/or occupants' habits.

Implications Seasonal and diurnal variations of VOCs, PM_2.5, bioaerosols in house, office, and schools were observed, in which PM_2.5 and bioaeorosols showed marked both intra- and interday variability, but VOCs did not. VOC-containing products were the most common source of air pollutants affecting the indoor air quality. External factors affecting the indoor air quality were season and indirectly ventilation. A grab sample cannot be representative in evaluating the air quality of a naturally ventilated environment precisely.     

How vital is the "lack of funding" in effective environmental management in Turkey?

The conflict experienced in Turkey between adequate legal and legislative arrangements with weak capabilities of policy implementation and enforcement is a typical scenario experienced in developing countries. The difficulties faced in environmental management is increased by funding issues. Although environmental management is directly influenced by problems associated with the distribution of public funds, lack of funding is not the sole reason responsible for the mismanagement of resources. The paper seeks to answer whether the lack of funding allocated to ameliorate environmental degradation and pollution is the main reason for an environmental crisis situation in Turkey. Turkey needs to ensure implementation of the basic obligations stated in its environmental policy with respect to national and international issues. Specific obstacles Turkey needs to overcome for more effective environmental management will be examined within this context.     

Comparison of analytical techniques for the determination of aldehydes in test chambers

The level of carbonyl compounds in indoor air is crucial due to possible health effects and the high prevalence of their potential sources. Therefore, selecting a convenient and rapid analytical technique for the reliable detection of carbonyl compound concentrations is important. The acetyl acetone (acac) method is a widely used standard procedure for detecting gaseous formaldehyde. For measuring formaldehyde along with other carbonyl compounds, the DNPH-method is commonly applied. The recommended procedure for measuring volatile organic compounds (VOCs) is sampling on Tenax TA, followed by thermal desorption and GC/MS analysis. In this study, different analytical techniques for the quantification of formaldehyde, pentanal, and hexanal are critically compared. It was found that the acac- and DNPH-method are in very good agreement for formaldehyde. In contrast, the DNPH-method significantly underestimates indoor air concentrations of the higher aldehydes in comparison to sampling on Tenax TA, although both methods are strongly correlated. The reported results are part of the EURIMA-WKI study on levels of indoor air pollutants resulting from construction, building materials and interior decoration.     

A passively immobilized novel biomagsorbent for the effective biosorptive treatment of dye contamination

A new magnetic bio-based composite was designed by the magnetic modification of passively immobilized fungal cells. It was utilized for biosorptive decolorization of reactive dye-contaminated aquatic media. As a greener option, waste tea leaf tissues were used for the first time as an immobilization matrix for microbial cells. Immobilized magnetic cells (biomagsorbent) could be effectively used in both batch and dynamic flow mode treatment processes and real environmental application. Rapid equilibrium and high decolorization yields were observed for the target dye (reactive violet 1). The temperature did not significantly affect the process. Langmuir and the pseudo-second-order models could be better used to fit the process equilibrium and kinetics, respectively. Maximum monolayer sorption capacity was 152.88 mg g^?1. High biosorption and desorption yields for 50 consecutive dynamic flow decolorization cycles were recorded as striking results. The breakthrough time was 3420 min. Simulated and industrial water treatment performance of biomagsorbent was found to be more than 90%. The mechanism was evaluated by IR and zeta potential analysis. The magnetic character of the sorbent provided good mechanical durability, easy separation, and excellent regeneration ability. Consequently, this work provides new insight into scalar enhancement of water treatment.

     

Animal-related injuries: a population-based study of a five-state region in the upper Midwest: Regional Rural Injury Study II

PROBLEM: While agricultural injury has been identified among the major causes of occupational injury mortality and morbidity, data have been limited pertinent to the magnitude, consequences, and potential risk factors for animal-related injuries -- a major source of morbidity among agricultural operations. METHODS: Demographics, exposure, and injury data were collected for 1999 and 2001 among agricultural households in a five-state region. Causal models facilitated survey design, data analyses, and interpretation of results; directed acyclic graphs guided multivariate modeling. RESULTS: From 7,420 households (84% response of eligible), a total of 5,045 injury events were reported; 1,016 (20.1%) were animal-related. Multivariate analyses revealed increased risks for those <20 years; residents of all states compared to Minnesota; all age groups compared to 0-4 years; >0 hours worked; and prior agricultural injury history. For those 20+ years, increased risks were identified for: South Dakota residents; males; >0 hours worked; and prior agricultural injury history. For those cases <20 and 20+ years of age, 58% and 46%, respectively, resulted in lost work time on their agricultural operations (31% and 50%, one week or more). CONCLUSIONS: Animal-related injury has a major impact on the agricultural industry. Results serve as a basis for interventions and further research. IMPACT ON INDUSTRY: The impact of animal-related injuries on the agricultural industry appears significant; among age groups <20 and 20+, 85% and 82%, respectively, had some resulting restriction. For all events combined, 29% and 30%, respectively, involved restriction from one week to 3+ months; 12% and 15% involved restriction for one month or more. Among those <20 and 20+ years of age, 58% and 46%, respectively, lost work time on their own agricultural operation as a result of injuries associated with their own operation; 22% and 15% lost one week or more. Moreover, of the non-agriculture-related injuries, 31% and 50% resulted in lost work time on their own operation; 15% and 28%, respectively, lost one week or more. Restrictions such as these can affect the productivity of the operation, resulting in financial impacts, especially on small operations that have few people to manage the required tasks.     

Assessment of heavy metal concentrations in the food web of lake Beyşehir, Turkey

The accumulation of heavy metals (Cd, Pb, Hg and Cr) was measured by atomic absorption spectrophotometry in water, sediment, plankton and fish samples collected from Lake Bey?ehir, which is important bird nesting and visiting areas, and irrigation and drinking water sources. In Lake Bey?ehir, the accumulation orders of heavy metals were Cd>Pb>Cr>Hg in water, Pb>Cd>Cr>Hg in sediment, Pb>Cd>Cr>Hg in plankton, and Cd>Pb>Cr>Hg in the muscles and gills of chub, carp, tench, except for the muscle of pikeperch, in which it was Pb>Cd>Cr>Hg (P<0.05). In addition to this, accumulation orders of heavy metals in the food web was also found to be water>plankton>sediment>fish tissues, except for Cr. According to international criterias and Turkish regulations, heavy metal concentrations especially Cd and Pb in Lake Bey?ehir were markedly above the permissible levels for drinking water.     

Heavy metals in Yeniçağa Lake and its potential sources: soil,water, sediment,and plankton

The distribution and accumulation of heavy metals (Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Mo, Cd, Sn, Ba, Pb) in the water, sediments, plankton of Yeniça?a Lake, and its potential sources (creeks, sewage, artesian well, soil) were investigated during 1-year study period as monthly or seasonally. Element analyses were performed by ICP–MS. Results showed that the trace and toxic elements (Al, As, Mn, Pb, Fe) concentration in lake water and/or its feeding sources were above the recommended water standards (WHO, EC, EPA, TS-266). It was found that the maximum accumulation of the heavy metals iron, aluminum, manganese, zinc, and barium in the sediment of Yeniça?a Lake. The accumulation order of trace metals were Fe > Al > Mn > Zn > Ba > Ni > Cr > As > Cu > Pb > Co > Mo > Sn > Cd in the lake, creeks sediment, and soil samples. The similar results suggest that the accumulation of heavy metals in the sediment is a natural process. Metals accumulated in the lake are naturally mixed from the soil. However, the presence of heavy metals in the analysis of artesian well water and sewage reveals that the transportation occurs also from the groundwater to the lake. The results obtained in plankton in Yeniça?a Lake showed that aluminum, iron, manganese, zinc, and barium were most accumulated elements in the plankton. The lower averages of lead prevalent in the water and sediment during some months were seen to have a significant mean accumulation in the plankton.