A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Effects of intercropping with floricultural accumulator plants on cadmium accumulation in grapevine

Environmental Science and Pollution Research - Grapevine (Vitis vinifera L.) intercropping with floricultural cadmium (Cd) accumulator plants (Helianthus annuus L., Cosmos sulphureus Cav., Cosmos...     

Probabilistic health risk assessment of nitrosamines in drinking water of Shaoxing,Zhejiang, China

Environmental Science and Pollution Research - Nitrosamines (NAms) are potent genotoxic and carcinogenic but widely detected in drinking water. This study aimed to investigate the occurrence of...     

Elevation of biochar application as regulator on denitrification/NH3 volatilization in saline soils

Environmental Science and Pollution Research - Denitrification and NH3 volatilization are the main removal processes of nitrogen in coastal saline soils. In this incubation study, the effects of...     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.     

磁性Fe_3O_4/石墨烯纳米复合材料催化降解水中17β-雌二醇

利用化学沉淀法制备磁性四氧化三铁/石墨烯(Fe3O4/GE)纳米复合材料,并将其与H2O2构成非均相Fenton体系用于催化降解水中微量的17β-雌二醇(E2),研究了初始p H值,初始H2O2浓度,催化剂用量对E2降解的影响。结果表明,Fe3O4/GE纳米复合材料在无需外加光源的条件下能够有效催化降解E2。在p H 7.0,E2初始浓度为1 mg/L,初始H2O2浓度为15 mmol/L,Fe3O4/GE投加量为15 mg/L的条件下,反应8 h后可去除92.9%的E2。Fe3O4/GE具有便捷的磁分离特性和稳定的催化活性,经过7次循环使用后对E2的降解效率仍保持在91.5%左右。     

网状季胺基阴离子吸附剂制备及吸附性能

以丝瓜络为原料,采用醚化-接枝技术制备出季胺基阴离子交换吸附剂。采用电镜扫描、傅里叶红外光谱、比表面积孔径分布测定仪和元素分析仪等仪器对其进行分析和结构表征,并考察了温度、p H和硝酸盐初始浓度等因素对NO-3去除率的影响。实验结果表明,在20℃,p H值为3~10时,NO-3的吸附率可达90%左右;在不同温度下该吸附过程用Langmuir等温线模型和Freundich等温线模型描述均可;与伪一级动力学方程相比,伪二级动力学方程能更好地描述其吸附动力学方程。     

不同好氧预处理方式对餐厨垃圾产甲烷的影响

为了研究不同好氧预处理方式对餐厨垃圾厌氧消化产甲烷的影响,通过建立3个模拟厌氧生物反应器,研究了传统厌氧生物反应器C1、上层好氧预处理-厌氧生物反应器C2和底部好氧预处理-厌氧生物反应器C3 3种不同操作条件下的产甲烷过程.结果表明,挥发性有机酸的累积使C1始终处于产甲烷滞后阶段;而C2、C3的好氧预处理通过加快易水解酸化组分和过量挥发性有机酸的好氧降解,有效缓解了酸性抑制,产甲烷滞后时间明显缩短至10 d内.第32天C2停止上层曝气后,在27 d内甲烷浓度达到了50％以上,同时,产甲烷速率迅速上升,并在第81天可达到峰值773 mL/(kg·d).C3在第11天停止底部曝气后,虽然经过22 d的时间甲烷浓度即上升至50％,但之后产甲烷速率经历回落阶段后再次逐渐上升,在实验结束时仅达到517 mL/(kg·d).上层曝气的好氧预处理方式所需曝气时间相对较长,但其产甲烷启动快,与底部曝气相比,其后期的甲烷化过程更稳定并可达到较高的产甲烷速率.     

混凝-生物强化联合处理环氧树脂高盐废水

环氧树脂高盐废水是目前较难处理的工业废水之一.采用混凝联合生物强化工艺:通过混凝过程进行预处理后,投加嗜盐菌进行生物强化考察盐度变化对系统降解有机物的影响以及污泥性状的变化情况.结果表明,当废水中氯离子浓度达到驯化目标10 g/L时,系统对COD的去除率仍稳定在85％左右;以没有投加嗜盐菌的反应器为对照组,在进水COD平均浓度为550 mg/L左右,氯离子浓度由12 g/L增至21 g/L时,对照组COD平均去除率由82％降至60％以下,而投加了嗜盐菌的反应器(投加组)则仍保持在85％以上;此外,盐度的变化同时影响污泥的活性及其沉降性能,随着盐度增大,两组中的污泥活性均有所降低,但投加组的污泥活性相对较高,其污泥的沉降时间和污泥体积指数(sludge volume in-dex,SVI)值也较低.采用本工艺处理环氧树脂高盐废水,使得生物处理过程能够长期稳定运行,且能够保持较高的耐盐度和COD去除率.     

一种新型铋基光催化剂的合成及其可见光催化性能

采用水热法合成铋基光催化剂Bi4VO8Br,通过X-射线粉末衍射、扫描电镜等手段对其进行表征.选择甲基橙为目标降解物来评价不同条件下合成的Bi4VO8Br在可见光下的光催化活性,发现pH 3、反应时间15 h、反应温度160℃为材料水热合成的最佳条件.考察了Bi4VO8Br在可见光及紫外光下对几种农药和增塑剂的光催化降解性能,显示了Bi4VO8Br对不易光解的含苯环有机物的可见光高活性.五氯酚的光催化过程影响因素优化结果表明,可见光和紫外光分别照射120 min和20 min,其降解率分别达到97％和99％,Bi4VO8Br表面上活性基团的捕获即空穴的氧化作用是主要反应原理.