Evaluation of seasonal variation and the optimization of reducing sugar extraction from Ulva prolifera biomass using thermochemical method

Environmental Science and Pollution Research - Green macroalgae comprise significant amount of structural carbohydrates for their conversion to liquid biofuels. However, it generally relies on...     

Risk assessment due to ingestion of natural radionuclides and heavy metals in the milk samples: a case study from a proposed uranium mining area, Jharkhand

Ingestion of radionuclides and heavy metals through drinking water and food intake represents one of the important pathways for long-term health considerations. Milk and milk products are main constituents of the daily diet. Radionuclides and heavy metals can be apprehended in the ecosystem of the East Singhbhum region which is known for its viable grades of uranium, copper and other minerals. For the risk assessment studies, samples of milk were collected from twelve villages around Bagjata mining area and analysed for U(nat), ²²⁶Ra, ²³⁰Th, ²¹⁰Po, Fe, Mn, Zn, Pb, Cu and Ni. Analysis of the results of the study reveals that the geometric mean of U(nat), ²²⁶Ra, ²³⁰Th and ²¹⁰Po was 0.021, 0.24, 0.23 and 1.08 Bq l^???1, respectively. The ingestion dose was calculated to be 12.34 ??SvY^???1 which is reflecting the natural background dose via the route of ingestion, and much below the 1 mSv limit set in the new ICRP recommendations. The excess lifetime cancer risk was estimated to be 1.72 × 10^???4 which is within the acceptable excess individual lifetime cancer risk value of 1 × 10^???4. The geometric mean of Fe, Mn, Zn, Cu and Ni was 4.91, 0.29, 4.77, 0.56 and 0.48 mgl^???1, respectively; whereas the daily intake was computed to be 0.44, 0.03, 0.43, 0.05 and 0.04 mg/day, respectively. Pb was not detected in any of the samples. The hazard quotient revealed that the intake of the heavy metals through the ingestion of milk does not pose any apparent threat to the local people as none of the HQ of the heavy metals exceeds the limit of 1.     

A rapid method for determination of Aroclor 1260 in cattle adipose tissue

Abstract

A simple analytical procedure for the determination of Aroclor 1260 in cattle adipose tissue is described. The polychlorinated biphenyls residues are extracted from the tissue using a soxhlet extractor and the extracts are cleaned up using a florisil SEP‐PAK cartridge. The residues are detected using a gas chromatograph equipped with an electron capture detector. The effect of extraction time of the Aroclor 1260 residues from the tissue has been investigated and a period of four hours is found to give satisfactory percent recoveries. Greater than 85 percent recoveries were obtained from adipose tissue spiked with Aroclor 1260. The method can be used to detect Aroclor 1260 residue levels as low as 0.10 parts per million.

The method was used to analyze thirty‐one cattle adipose tissue samples out of which twenty‐six samples were taken from cattle suspected of exposure to a pasture containing electrical transformers and capacitors containing Aroclor 1260. Five control samples were collected from cattle with no known exposure. All twenty‐six samples were found to contain non‐detectable Aroclor 1260 residues.     

Multiresidue analysis of neonicotinoids by solid-phase extraction technique using high-performance liquid chromatography

For routine monitoring of pesticides, a multiresidue analysis through solid-phase extraction technique and using high-performance liquid chromatography (HPLC) in cotton seed cake (CSC) has been developed. Extraction of fortified samples was carried out with aqueous acetone under vacuum. The concentrated extract was loaded onto the solid-phase extraction units, preconditioned with acetonitrile. The extraction units were then washed with hexane and finally eluted with acetonitrile. The pesticide residues were determined using a multiresidue method by reversed-phase HPLC. The average percentage recoveries were found to range between 65.47% and 110% at spiking levels of 10 to 40 mg/kg. The method developed shows a healthy rate of recovery and can successfully be utilized for the extraction and screening of neonicotinoid residues in CSC. The detection limits for imidacloprid, acetamiprid, and thiacloprid using this method were found to be 5, 10, and 20 mg/kg, respectively.     

Monitoring of methoxychlor residues in the Athabasca River system in northern Alberta after treatment for control of black fly larval populations

Methoxychlor (2,2-bis(p-methoxyphenyl)-1,1,1-trichloroethane) was used in the Athabasca River in northern Alberta for the control of black fly larvae, Simulium arcticum, during May to July of 1981 to 1987. Samples of river water and sediment were analyzed for methoxychlor residues each year as part of Alberta Environment's program to assess environmental impact and monitor compliance with issued permits. During 1985 fish samples were also collected at various sites downstream and upstream of the point of application of methoxychlor. This paper summarizes the residue data obtained by analysing these fish, sediment and water samples collected from the Athabasca River system during the years 1981 to 1987.     

Influence of GSTM1 and GSTT1 genotypes and confounding factors on the frequency of sister chromatid exchange and micronucleus among road construction workers

In the present study, we have investigated the influence of polymorphism of GSTM1 and GSTT1 genes and confounding factors such as age, sex, exposure duration and consumption habits on cytogenetic biomarkers. Frequency of sister chromatid exchanges (SCEs), high frequency cell (HFC) and cytokinesis blocked micronuclei (CBMN) were evaluated in peripheral blood lymphocytes of 115 occupationally exposed road construction workers and 105 unexposed individuals. The distribution of null and positive genotypes of glutathione-S transferase gene was evaluated by multiplex PCR among control and exposed subjects. An increased frequency of CBMN (7.03 ± 2.08); SCE (6.95 ± 1.76) and HFC (6.28 ± 1.69) were found in exposed subjects when compared to referent (CBMN - 3.35 ± 1.10; SCE - 4.13 ± 1.30 and HFC - 3.98 ± 1.56). These results were found statistically significant at p < 0.05. When the effect of confounding factors on the frequency of studied biomarkers was evaluated, a strong positive interaction was found. The individuals having GSTM1 and GSTT1 null genotypes had higher frequency of CBMN, SCE and HFC. The association between GSTM1 and GSTT1 genotypes and studied biomarkers was found statistically significant at p < 0.05. Our findings suggest that individuals having null type of GST are more susceptible to cytogenetic damage by occupational exposure regardless of confounding factors. There is a significant effect of polymorphism of these genes on cytogenetic biomarkers which are considered as early effects of genotoxic carcinogens.     

Review on the innovative uses of steel slag for waste minimization

Piles of steel slag, a solid waste generated from the iron and steel industry, could be seen due to no utility found for the past century. Steel slag has now gained much attention because of its new applications. The properties of slag greatly influence its use and thus had got varied applications. The chemical composition of steel slag varies as the mineral composition of raw material such as iron ore and limestone varies. This paper reviews the characteristics of steel slag and its usage. The paper reviews recent developments in well-known applications to the steel slag such as aggregate in bituminous mixes, cement ingredient, concrete aggregate, antiskid aggregate, and rail road ballast. This paper also reviews novel uses such as mechanomutable asphalt binders, building material, green artificial reefs, thermal insulator, catalyst and ceramic Ingredient. The review is also done on utilization of solid waste for waste management by the novel methods like landfill daily cover material, sand capping, carbon sequestration, water treatment and solid waste management. Review also shows recovery of pure calcium carbonate and heavy metals from slag, providing opportunity for revenue generation. Steel slag once traded as free to use by steel industries is now sold in the market at some price. Its utilization is of great economic significance as it also contributes to the reduction of solid waste.     

A comprehensive review of the energy efficiency on nano coated fin and tube condenser

The condenser is a piece of equipment used to effectively transfer heat from water to the environment. The fin and tube condenser is the most commonly used in commercial applications. The improved performance of heat transfer in the fin and tube condenser is a significant area of study all over the world because optimizing the efficiency of heat transfer in the condenser will contribute to enhancing the effectiveness of system performance. The vapor deposition, plasma spray, and thermal spray techniques are being used, and it is determined that a heat transfer enhancing coating improves condenser performance. This review discusses the nanomaterial coating over the fin and tube condenser in detail. The various nanomaterial coatings with various propositions and coating methods had been discussed with the evidence of previous researchers. At a 50-degree inclination angle on the condensate plate, the condensate over the coating surface increases by more than 30%. The thermal properties of the working fluid are improved over the condenser, and the overall effectiveness of the condenser is increased by approximately 40% over the non-coated condenser. A 1% volumetric concentration of Nanoparticles in the coated material achieves a maximum efficiency increase of 78.7%.